Content |
|
Content |
|
Foreword ................................................................................ |
3 |
Control Features and Connections...................................... |
5 |
Front Panel...................................................................... |
5 |
Connections .................................................................... |
6 |
Analog Signal Path Diagram............................................ |
7 |
Introduction............................................................................ |
8 |
About this Manual........................................................... |
8 |
General Safety Guidelines ............................................... |
9 |
Setup and Connection......................................................... |
11 |
Package Contents .......................................................... |
11 |
Connections .................................................................. |
11 |
2-pole Use Cases................................................................. |
13 |
Overdrive...................................................................... |
13 |
Noise / Reverb Gate ...................................................... |
14 |
Multimode Filter............................................................ |
15 |
Sidechain Dynamic Processor ....................................... |
16 |
Beat Slicer ..................................................................... |
17 |
Wave Crusher ............................................................... |
18 |
2-pole Analog Filter User´s Manual |
2 |
Auto-Filter ..................................................................... |
19 |
Analog Kick ................................................................... |
20 |
Auto Wah-Wah ............................................................. |
21 |
Basic Operation................................................................... |
22 |
Powering On / Off ......................................................... |
22 |
Where are the Presets? ................................................... |
22 |
Editing ........................................................................... |
22 |
Envelope Input............................................................... |
22 |
Cutoff CV Input.............................................................. |
22 |
Gate Input ..................................................................... |
22 |
2-pole Parameters ............................................................... |
23 |
Amplifier Section ........................................................... |
23 |
Filter Section.................................................................. |
23 |
Envelope Section ........................................................... |
26 |
LFO Section ................................................................... |
28 |
Appendix .............................................................................. |
29 |
Technical Data .............................................................. |
30 |
Glossary ........................................................................ |
31 |
Declaration of Conformity ............................................. |
33 |
Product Warranty & Support .......................................... |
36 |
Foreword
Thank you for purchasing the Waldorf 2-pole analog filter.
By choosing a Waldorf product, you know this device has been crafted and produced carefully, in Germany, for the most exigeant musicians. We hope you will have great fun and many creative / innovative ideas using it.
Reading this user manual, you will discover all the device features, learn its basic use in real situations, and benefits of tips & tricks we gathered during product development / quality checks.
Your Waldorf-team
3
Hint
Waldorf Music is not liable for any erroneous information contained in this manual. The contents of this manual may be updated at any time without prior notice. We made every effort to ensure the information herein is accurate and that the manual contains no contradictory information. Waldorf Music extends no liabilities in regard to this manual other than those required by local law.
This manual or any portion of it may not be reproduced in any form without the manufacturer's written consent.
Waldorf Music GmbH, Lilienthalstrasse 7, D-53424
Remagen, Germany
2-pole Analog Filter User´s Manual
Foreword
Hardware: |
Frédéric Meslin, Oliver Rockstedt, |
|
Frank Schneider |
Design: |
Axel Hartmann, Stefan Stenzel |
Manual / Layout: |
Frédéric Meslin, Holger Steinbrink |
Revision: |
1.0, May 2014 |
wPlease visit our website www.waldorfmusic.com for more information about the 2-pole Analog Filter!
2-pole Analog Filter User´s Manual |
4 |
Christian Bacaj, Karsten Dubsch, Willie Eckl, Joachim Flor, Michael von Garnier, Daniel Krawietz, Kurt "Lu" Wangard,, and anyone we have forgotten.
Control Features and Connections
a Amplifier Section
b Filter Section
c LFO Section
d Envelope Section
5 |
2-pole Analog Filter User´s Manual |
Control Features and Connections
A Power Input 12V DC |
E Envelope Follower CV Input |
||
B |
Power Switch |
6 |
Audio Output Jack (mono) |
C |
Gate Input |
7 |
Audio Input Jack (mono) |
DCutoff CV Input
2-pole Analog Filter User´s Manual |
6 |
Control Features and Connections
The 2-pole Filter is a full analog signal processor with the following signal path:
The input signal is first pre-amplified and then sent to the processing circuitry. This processing consists in a chain of three elements: Rectifier module - Multimode filter - Overdrive module.
Finally, the signal is attenuated and buffered to provide the output.
wThe Activate switch provides a true bypass functionality on the signal path. When deactivated, the input jack is physically connected to the output jack and the 2-pole has no influence on the audio signal.
7 |
2-pole Analog Filter User´s Manual |
Introduction
This manual was written to help you getting familiar with the 2-pole Filter. It will also aid experienced users with routine tasks.
To avoid confusion, the terminology in this manual is based on the 2-pole Filter parameter names. You will find a glossary at the end of this manual; it explains the various terms used.
Important terms are highlighted in bold letters.
Symbols
mCaution – The comments that follow this symbol will help you avoid errors and malfunctions.
wInfo – Additional information on a given topic.
+Instruction – Follow these guidelines to execute a desired function.
[ Example – Real-world examples to try out.
Highlighted Control Features and Parameters
All of the 2-pole Filter´s buttons, controls and parameters are highlighted in bold letters throughout the manual.
Example:
•Press the Trigger button.
•Move the Cutoff knob.
2-pole Analog Filter User´s Manual |
8 |
mPlease read the following safety tips carefully! They include several precautions you should always observe when dealing with electronic equipment. Read all of the instructions before operating your device
Suitable Operating Conditions
•Use the device indoors only. Outside it could be rainy or humid as well as too hot or too cold.
•Never use the device under damp conditions such as in bathrooms, washrooms or around indoor swimming pools.
•Do not use the device in extremely dusty or dirty environments in order maintain the surface finishing of the 2-pole Filter.
•Make sure that adequate ventilation is available on all sides of the device. Do not place the device near heat sources such as radiators.
•Do not expose the device to direct sunlight, even if you have a suitable sunscreen.
•Do not expose the device to extreme vibrations.
Introduction
Power Supply
•Unplug the device when you are not using it for longer periods.
•Always pull the plug when unplugging the device, never the cable.
Operation
•Never place objects containing liquids on or near the device.
•Always place the device on a stable base only.
•Make sure no foreign objects find their way into the chassis. If for some reason this should occur, switch the power off, unplug the device and consult a qualified repair center.
•This device, used on its own or with amplifiers, speakers or headphones, can generate volume levels that may result in irreparable damage to your hearing and/or speakers and amplifiers. For this reason you should keep the volume at appropriate levels at all times.
9 |
2-pole Analog Filter User´s Manual |
Introduction
Maintenance
•Do not open the device or remove the cover. Refer all service and repair tasks to qualified personnel. There are no user serviceable parts inside the chassis.
•Use only a dry, soft cloth or brush to clean the device. Never use alcohol, cleaning solutions or similar chemicals. They will damage the surface of the chassis.
Proper Use
This device is designed exclusively to process lowfrequency audio signals for the purpose of generating sound. Any other use is prohibited and voids the warranty extended by Waldorf Music. Waldorf Music is not liable for damages due to incorrect use.
mDo not leave your 2-pole Analog Filter near children, mothers-in-law or pets. This could lead to critical interactions.
2-pole Analog Filter User´s Manual |
10 |
The Waldorf 2-pole Filter package comes complete with:
•the Waldorf 2-pole Filter module
•an external power supply (DC 12V / 500mA)
•a printed quick start guide with use cases
wYou can also download additional material and software here: www.waldorfmusic.com
Please ensure all the items above are included. If something is missing, contact your local dealer.
We recommend that you keep the original packing material for future transport.
Setup and Connection
In order to get started with your 2-pole Analog Filter, you will need an AC power outlet. For the connection of the audio output, you will need either a mixing console or an audio interface.
+To connect the devices:
1.Turn all units off.
2.Connect the 2-pole Filter´s audio output 6 to your mixing console or your computer audio interface. The output provides a line level signal.
3.Connect the audio input 7 to an output of your signal source. The audio input is suitable for line level equipment (audio interface, CD player, synthesizer, drum computer etc.) and high impedance instruments (e.g. electric bass, electro acoustic guitar).
4.If you want to control the 2-pole Filter via CV / Gate signals (3, 4, 5), please connect them to the CV / Gate outputs of your gear.
5.Switch on your setup and the 2-pole Analog Filter 1. Finally, switch on your amplifier or active monitor speakers.
11 |
2-pole Analog Filter User´s Manual |