Waldmann HI 20 Instruction Manual

A defective protection

- danger of injury.

General

GB Instructions for Use Halogen Light HI.. 20

Safety instructions:

The light may only be operated in

to the protective earth conductor.

tion class III must be operated

The manufacturer cannot be held liable for damage caused by using the unit for purposes contrary

to the designated use or by ignoring safety instructions and warnings.

Workplace light - universally ap-

The light is designed for continuous

General

tection class II

Abbreviations and symbols:

Take note of the accompa-

VDE Approval

A defective protection pane

tection class III

GB Instructions for Use Halogen Light HI.. 20

Introduction

According to standard DIN EN 1837, an illuminance of 500 lx is required in the work area of machines.

This can often not be achieved using a general machine or room illumination. However, only in rare cases is it

Waldmann model).

The machine light HI.. 20 provides concentrated light in the places where it is needed. Different designs allow

virtually any type of mounting and adjustment. A light emitting concentrated light, in addition to the basic illumi-

The use of Cool Beam halogen lamps allow the distance to heat-sensitive objects to be substantially reduced,

The selection between various lamp types having different emission characteristics allows a more universal use.

GB Instructions for Use Halogen Light HI.. 20

Specifications and Main Features