Dear Parent,
Ever nice the look on your baby’s face when th learn something
new through their own discovery? ese self-accomplished
moments are a parent’s greatest reward. To help fulfill them,
VTech® created the Infant Learning® series ts.
ese unique interactive learning ts directly respond to what
children do naturally – play! Using innovative technology, these
ts react to baby’s interactions, making each play perience fun
and unique as th learn age-appropriate concepts like first words,
numbers, shapes, colors and music. More importantly, VTech®’s
Infant Learning® ts develop baby’s mental and physical abilities
by inspiring, engaging and teaching.
At VTech®, we know that a child has the ability to do great things.
at’s why all our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best their ability. We thank you for trusting VTech® with the
important job helping your child learn and grow!
Sincerely,
Julia Fitzgerald
Vice President, Marketing
Vtech Electronics, NA
To learn more about the Infant Learning® and other VTech® toys, visit www.vtechkids.com
INTRODUCTION
Thank you for purchasing the VTech® Sit-to-Stand Alphabet Train™
learning toy!
The VTech® Sit-to-Stand Alphabet Train™ will take your child on a
journey through letters, numbers, music and more. Entertaining sound
effects, dancing lights and fun melodies reward your child’s curiosity
while taking baby on the ride of a lifetime!
ON/OFF/MODE
SELECTOR SWITCH
BLOCK
DROP SLOT
BLOCK
SLOTS
VOLUME
CONTROL
SWITCH
BOOK WITH
6 PAGES
5 NUMBER
BUTTONS
ATTACHABLE
CARRIAGE WITH
BLOCK STORAGE
Introduction
26 LETTER
BLOCKS
2
INCLUDED IN THIS PACKAGE
- One VTech® Sit-to-Stand Alphabet Train™ learning toy
- One instruction manual
WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child’s safety.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of
the unit. Use a coin or a screwdriver to
loosen the screw.
3. Install 3 new ‘AA’ (AM-3/LR6) batteries
following the diagram inside the battery
box.
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbonzinc) or rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be
used for an extended period of time.
• Always remove exhausted batteries from the equipment.
Getting Started
3
• Do not dispose of batteries in re.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended
are to be used.
WE DO NOT RECOMM END THE USE OF RECHARGE ABLE
BATTERIES.
With the VTech® Sit-to-Stand Alphabet Train™, safety comes rst.
To ensure your child’s safety, please only assemble this product
by an adult.
To attach the carriage to the engine, insert
it into the slot at the back of engine. You
will hear a click, which lets you know the
carriage is attached correctly.
To detach the carriage from the engine, push the blue button at the end
of the engine in and then push it up. Once the button is pushed up, pull
the carriage from the slot.
Assembly Instructions
4
PRODUCT FEATURES
1. O N / O F F / M O D E S EL E C T O R
SWITCH
To turn the unit ON, slide the red
ON/OFF/MODE SELECTOR SWITCH
located at the top of the engine to the
Learning Mode ( ) or Discovery
Mo d e ( ) po siti o n . To tur n th e
unit OFF, slide the ON/OFF/MODE
SELECTOR SWITCH to the OFF ( )
position.
2. VOLUME CONTROL SWITCH
To ad j u s t th e vo l u me, slide the
VOLUME CONTROL SWITCH located
at the back of the engine to the LOW
VO LUM E or the HIGH VOLU ME
position.
3. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech® Sit-to-Stand Alphabet Train™
will automatically power-down after approximately 45 seconds
without input. The unit can be turned on again by pressing any
button.
Product Features
5
ACTIVITIES
1. Sl i de th e r ed ON / O FF / MO D E
SELECTOR SWITCH located at the
top of the engine to the Learning
Mode or Discovery Mode position to
turn the unit on. You will hear a train
engine sound, entertaining phrases
and music. The lights will ash with
the sounds.
2. Press the elephant button to hear an
elephant sound effect followed by fun
phrases and sung songs. The lights
will ash with the sounds.
3. Press the number buttons to learn
ab o u t number s in th e Le a rning
Mode and learn about colors in the
Discovery Mode. The lights will ash
with the sounds.
4. Turn the book’s pages to learn about
letters and objects and listen to fun
stories in both modes. The lights will
ash with the sounds.
Activities
6
5. Place the blocks onto the train’s block
slots to learn letters and objects in
both modes. Upbeat melodies and fun
sounds will accompany the play. The
lights will ash with the sounds.
6. Drop the blocks into the slot at the top of
the train and they’ll slide out the back!
7. If there is no input to the unit after approximately 15 seconds, you
will hear a fun sung song. After another 15 seconds if there is still
no input, you will hear a question, which will encourage the child to
nd the correct block according to the book page. After another 15
seconds if there is still no input, you will hear the phrase “Bye-bye,”
then the unit will automatically power-down.
MELODY LIST
1. Baby Elephant Walk
2. I’ve Been Working on the Railroad
3. Pop! Goes the Weasel
4. Twinkle, Twinkle, Little Star
5. It’s Raining, It’s Pouring
6. This Old Man
7. Three Little Kittens
8. Humpty Dumpty
9. Hickory Dickory Dock
10. Mulberry Bush
Activities
7
SUNG SONG LYRICS
SUNG SONG 01 LYRICS (Tune of “London Bridge”)
Happily we chug along,
Learning letters, singing songs.
Happily we chug along,
On the train!
SUNG SONG 02 LYRICS (Tune of “Alphabet Song”)
A-B-C-D
E-F-G
H-I-J-K
L-M-N-O-P
Q-R-S
T-U-V
W-X
Y and Z.
Now I know my ABCs, come and ride the train with me!
CARE & MAINTENANCE
1. Keep the unit and book pages clean by wiping with a slightly damp
cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
Care & Maintenance
8
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call VTech® 1-800521-2010 in the U.S., or 1-877-352-8697 in Canada.
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech® take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department at
1-800-521-2010 in the U.S., or 1-877-352-8697 in Canada, with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
Troubleshooting
9
FCC Notice:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-
003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA
NORME NMB-003 DU CANADA.
Caution : changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Other Info
10
Loading...