VTech Cruise 'n Learn Driver Owner's Manual
Cruise `n Learn Driver
© 2002 VTech
Printed in China
91-01512-003
™
Dear Parent:
At VTech® we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights
and music, all VTech® infant and toddler learning products
encourage your child’s natural growth and discovery skills. When
it comes to providing electronic learning products that enlighten,
entertain and develop minds, at VTech® we see the potential in
every child.
1
Untitled-3 8/20/02, 11:33 AM1
INTRODUCTION
Thank you for purchasing the VTech® Cruise ’n Learn Driver™ learning
toy! This product is one of a family of high quality electronic learning
toys. We at VTech® are committed to providing the best possible products
to entertain and educate your child. Should you have any questions or
concerns, please call our Consumer Services Department at 1-800-5212010 in the U.S. or 1-800-267-7377 in Canada.
The VTech® Cruise ’n Learn Driver™ is an interactive driver for toddlers
18 months and up. Loaded with real car features, sound effects and lights
for make-believe fun. Turn the steering wheel to see Lucky drive back
and forth along the roadway, be sure to make frequent stops along the
way! Hop into the driver seat and take Lucky on an adventure!
TURNING MIRROR
RADIO & SEATBELT
BUTTONS
TURN SIGNAL
LEVER
HORN BUTTON
STEERING WHEEL
LIGHT UP TRAFFIC
LIGHTS
LIGHT UP SIGNAL
LIGHTS
LOCATION
BUTTONS
GEARSHIFT
ON/OFF/MODE
SELECTOR
INCLUDED IN THIS PACKAGE
1. One VTech® Cruise ’n Learn Driver
2. One instruction manual
™
WARNING:All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit. Use a coin or
screwdriver to loosen the screw.
3. Install 2 new “AA” (UM-3/LR6)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove batteries from the equipment when the unit will not be used
for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are
to be used.
32
Untitled-3 8/20/02, 11:33 AM2-3
Loading...