Vollrath Cayenne 1776, Cayenne 1777 User Manual
ENGLISH
Operator’s Manual
CAYENNE® 1776 & 1777 COLONIAL KETTLE™
WARMERS AND RETHERMALIZERS
Item Description Voltage Watts Watts Plug
72165 Model 1776-11, 11 Qt. Warmer, Black 120 700W 5.8 5-15P
72166 Model 1776-11, 11 Qt. Warmer, Burnt Copper 120 700W 5.8 5-15P
72170 Model 1776-7, 7 Qt. Warmer, Black 120 700W 5.8 5-15P
72171 Model 1776-7, 7 Qt. Warmer, Burnt Copper 120 700W 5.8 5-15P
72175 Model 1777-11, 11 Qt. Rethermalizer, Black 120 1000W 8.3 5-15P
72176 Model 1777-11, 11 Qt. Rethermalizer, Burnt Copper 120 1000W 8.3 5-15P
72180 Model 1777-7, 7 Qt. Rethermalizer, Black 120 1000W 8.3 5-15P
72181 Model 1777-7, 7 Qt. Rethermalizer, Burnt Copper 120 1000W 8.3 5-15P
72459 Model 1776-11, 11 Qt. Warmer, Black 230 600W 2.6 Schuko
72542 Model 1776-11, 11 Qt. Warmer, Black 230 600W 2.6 UK
72511 Model 1776-7, 7 Qt. Warmer, Black 230 600W 2.6 Schuko
72462 Model 1777-11, 11 Qt. Rethermalizer, Black 230 900W 4.0 Schuko
72543 Model 1777-7, 11 Qt. Rethermalizer, Black 230 900W 4.0 UK
Thank you for purchasing this Vollrath Equipment. Before operating the equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this
packaging to ship the equipment if repairs are needed.
RegisteR youR pRoduct on-line at www.vollRath.com
Item No. 2350220- en Rev 09/14
SaFety precaUtionS
Unpacking the eqUipment and initial SetUp
To ensure safe operation, read the following statements and
understand their meaning. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that can cause
severe personal injury, death, or substantial property damage if the
warning is ignored.
CAUTION
Caution is used to indicate the presence of a hazard that will or can
cause minor personal injury or property damage if the caution is
ignored.
NOTE
Note is used to notify people of installation, operation, or
maintenance information that is important but not hazard-related.
For Your Safety!
These precautions should be followed at all times. Failure to follow
these precautions could result in injury to yourself and others.
To reduce risk of injury or damage to the equipment:
Use only grounded electrical outlets matching the nameplate rated
voltage.
Use equipment in a at, level position.
Do not use an extension cord with this equipment. Do not plug this
equipment into a power strip or multi-outlet power cord.
Unplug equipment, turn off and let it cool before cleaning or moving.
ENGLISH
Unplug equipment when not in use.
Do not operate without water.
Do not spray controls or outside of equipment with liquids or cleaning
agents.
Do not clean the equipment with steel wool.
Keep equipment and power cord away from open ames, electric
burners or excessive heat.
Do not operate unattended.
Do not operate equipment in public areas and/or around children.
Do not operate if equipment has been damaged or is malfunctioning in
any way.
When no longer needed, dispose of all packaging and materials in an
environmentally responsible manner.
1. Remove all packing material and tape, as well as any protective plastic
from the equipment.
2. Clean any glue residue left over from the plastic or tape.
3. Place the equipment in the desired location.
4. Plug the equipment into a properly grounded electrical supply matching
the nameplate rating. Damage to the equipment can occur if incorrect
power is supplied to equipment.
FeatUreS and controlS
A
Figure 1. Features and Controls.
A
ON/OFF HEAT CONTROL SWITCH. Switches the equipment power
ON or OFF and is used to set or adjust the temperature of the well.
The higher the number the higher the temperature, the lower the
number the lower the temperature. Rotating the control switch all the
way in the counterclockwise direction switches the unit OFF.
operation
2
FUnction and pUrpoSe
The 1000W models are intended and designed to rethermalize containers of
refrigerated, previously cooked food and hold containers of hot food at safe
serving temperatures. All models are intended and designed to keep food
product at proper serving temperatures. Food must be prepared and placed
in all models at proper serving temperatures for hot food holding mode.
These units are not designed to cook raw food.
This equipment is not intended for household, industrial or laboratory use.
OperatOr’s Manual
Do not over ll wells, pans or trays. Liquid could contact the
electrical components and cause a short circuit or an electrical
shock. Unplug unit before performing service, draining or removing
spillage pans and trays. Do not spray water or cleaning products.
Do not use a power cord that has been modied or damaged.
WARNING
Electrical Shock Hazard.
Keep water and other liquids from entering the
inside of the unit. Liquid inside the unit could cause
an electrical shock. Do not damaged power cord.
Loading...