VIZIO XHP100 User Manual

ACTIVE NOISE CANCELLING

HIGH DEFINITION

HEADPHONES WITH WIRELESS DOCK FOR iPod

XVTHP200 – QUICK START GUIDE

®

IMPORTANT SAFETY INFORMATION

Long-term exposure to loud music may cause hearing damage. Avoid extreme volume when using headphones,
especially for extended periods.

Do not use headphones while operating a motor vehicle or a bicycle. Doing so is dangerous and may violate local
laws and regulations.

Sounds that you rely on as reminders or warnings may have an unfamiliar character when using headphones. Be
aware of how these sounds may vary in character so you can recogize them as needed.

Do not drop, sit on, or allow the headphones to be immersed in water. Do not wear headphones in the rain.

Do not use headphones if the inability to hear outside sounds may present a danger to you or others.

For important information on listening guidelines, see

Incorporated under license from SRS Labs, Inc.

SRS TruSurround HD and SRS TruVolume

are trademarks of SRS Labs, Inc.

Information on Hearing Damage

Manufactured under license from Dolby

Laboratories. Dolby and the Double-D symbol are

trademarks of Dolby Laboratories.

on page 16.

iPhone® and iPod® are trademarks of Apple Inc.,

registered in the U.S. and other countries.

PACKAGE CONTENTS

Quick Start GuideHigh Definition Headphones Wireless Dock

3.5mm Audio CablePower Adapter for Wireless Dock iPod Trays (3)

Travel Charger for Headphones Carrying Case RCA Audio Cable

1

CONTROLS AND CONNECTIONS

Headphones

Charging Contacts

Adjustable

Headband

(Both Sides)

Left/Right Ear Indicator

(Both sides)

Volume Up
Active Noise

Reduction
SRS

Power

Volume Down

Next

Charging Port

Input

Play/Pause

Previous

Charging Contacts: Must touch dock contacts to charge

Adjustable Headband: Extend headband to fit

Next: Go to next track on iPod/iPhone

Mini USB Port: Connect to travel charger

Input: Change audio source

Play/Pause: Play or pause audio

Previous: Go to previous track on iPod/iPhone

2

3.5mm Port

Volume Up: Increase volume

Active Noise Reduction: Activate to block background noise

SRS: Activate SRS sound processing when

listening to the wireless dock

Power: Press and hold for 2 seconds

to turn on or off

Volume Down: Decrease volume

3.5mm Port: Connect portable device

Wireless Dock - Rear Front

Charging Contacts

Charging Light

iPod Dock

Audio In

Input

SPDIF DC In

Audio Out

Hub/

Client

Input Lights

SRS Lights

Dolby Digital
Light

Pair

Power

Charging Contacts: Must touch headphone contacts to charge

Charging Light: Turns on when headphones are charging

Input: Change audio source

iPod Dock: Connect iPod to use as audio source

Audio In: Connect analog audio device

SPDIF: Connect digital audio device

Audio Out: Connect analog receiver or powered

speakers

DC In: Connect power adapter

Hub/Client: Change Hub/Client mode

Pair: Connect dock to headphones wirelessly

Power: Press to turn on/off

Input Lights: The light corresponds to the input

currently selected

SRS Lights: When SRS TruVolume or SRS TruSurround

HD is on, the corresponding light is on

Dolby Digital Light: When playing a Dolby Digital source, the

light is on (SPDIF only)

3

FIRST-TIME SETUP

1 2

Connect the power adapter to the DC IN port on the wireless dock.

Do not connect the travel charger to the dock.

Connect the other end of the power adapter to an electrical outlet.

3 4

Charge the headphones by placing them on the top of the wireless

dock. Ensure the charging contacts are touching.

When the headphones are charging, the charging light is on and

the power button on the headphones is red.

Allow the headphones to fully charge.

The headphones are fully charged when the charging light is off

and the power button on the headphones is off.

4