Vizio SB3620n-H6 User Manual

2.0 Sound Bar

2.0 Sound Bar

User Manual

User Manual

Model: SB3620n-H6

Model: SB3620n-H6

Please read this guide before using the product.

Please read this guide before using the product.

ENG - ii

Accessibility

Contact VIZIO for accessibility support at:
Email: [e-mail]
Phone: [phone]

Binding Arbitration Agreement and Class Action Waiver This purchase is subject to full VIZIO Terms and Conditions, including Binding Arbitration Agreement and Class Action Waiver, which may be viewed at vizio.com/en/terms/terms-of-service.

By using this device, you accept those Terms and Conditions.

You have the right to opt out of the Binding Arbitration Agreement and Class Action Waiver within 60 calendar
days of your purchase. Please refer to the Limited Warranty section of this User Manual or view the full VIZIO
Terms and Conditions for opt-out instructions.

ENG - iii

IMPORTANT SAFETY INSTRUCTIONS

Your Unit is designed and manufactured to operate within dened design limits, and misuse may result in electric shock or re. To prevent your Unit from being damaged,
the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these
instructions in a safe place for future reference.

• Heed all warnings.

• Follow all instructions.

• Do not use this Unit near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other Unit (including ampliers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at the ends where the plug is located, near convenience receptacles, or where they exit from the Unit.

• Only use attachments/accessories specied by the manufacturer.

• Use only with the stand, tripod, or bracket specied by the manufacturer, or sold with the Unit. When a cart is used, use caution when moving the cart/Unit
combination to avoid injury from tip-over.

• Unplug this Unit during lightning storms or when unused for long periods of time.

• Refer all servicing to qualied service personnel. Servicing is required when the Unit has been damaged in any way, such as when the power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the Unit, the Unit has been exposed to rain or moisture, does not operate normally, or has been dropped.

• To reduce the risk of electric shock or component damage, switch o the power before connecting other components to your Unit.

• Unplug the power cord before cleaning your Unit. A damp cloth is sucient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive
cleaners.

• Always use the accessories recommended by the manufacturer to ensure compatibility.

• When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Unit to
avoid causing re, electric shock, or component damage.

• Slots and openings in the back and bottom of the Unit are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure
these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided.

• Never push any object into the slots and openings on your Unit. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a re or
electric shock. Never spill liquids on your Unit.

• Do not block the subwoofer ports. Allow for 1-2 inches of space around all sides for ventilation.

• WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued exposure to loud
noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort.

• When connected to a power outlet, power is always owing into your Unit. To totally disconnect power, unplug the power cord.

• Do not overload power strips and extension cords. Overloading can result in re or electric shock.

• The wall socket should be located near your Unit and be easily accessible.

• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and contact your dealer.
Continuous use in this case may result in re or electric shock.

ENG - iv

IMPORTANT SAFETY INSTRUCTIONS

• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to
repair your Unit yourself.

• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power
cord immediately and contact your dealer for repair. Continued use of your Unit may cause re or electric shock.

• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause re or electric
shock.

• Ensure that the power cord and any other cables are unplugged before moving your Unit.

• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause re or electric shock. When
your Unit will not be used for an extended period of time, unplug the power cord.

• To reduce risk of electric shock, do not touch the connector with wet hands.

• Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the
operator.

• Read and follow all warnings printed on the Unit.

• WARNING: This equipment is not waterproof. To prevent a re or shock hazard, do not place any container lled with liquid near the equipment (such as a vase or
ower pot) or expose it to dripping, splashing, rain, or moisture.

• CAUTION: Danger of explosion or re if batteries are mistreated. Replace only with the same or specied type.

• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in re.

• If the main wall plug or the appliance coupler is disconnected, the disconnected device will remain readily operable upon reconnection to an appropriate power source.

• No open ames, such as lighted candles, should be placed on the Unit.

• The ventilation should not be impeded by covering the ventilation openings with items,such as newspapers, table-cloths, curtains, etc.

• The equipment shall be used at maximum 35 degree C ambient temperature.

WARNING: To reduce the risk of re or electric shock, do not expose this Unit to rain or moisture.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

The lighting ash with arrowhead symbol
within an equilateral triangle is intended
to alert the user to the presence of not
isolated dangerous voltage within the
appliance that may be sucient magnitude
to constitute a risk of shock to persons.

The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and servicing instructions in the
literature accompanying the appliance.

Warning: This equipment is a Class II or
double insulated electrical appliance. It
has been designed in such a way that it
does not require a safety connection to
electrical earth.

ENG - v

TABLE OF CONTENTS

Package Contents ......................................................................................................................................1

Controls & Connections ............................................................................................................................2

First-time Setup .........................................................................................................................................5

Using the Remote ......................................................................................................................................8

Proper Placement ......................................................................................................................................9

Mode & Level Settings ...............................................................................................................................10

Using Button Combinations ......................................................................................................................12

Programming the Sound Bar ....................................................................................................................13

Bluetooth Pairing .......................................................................................................................................14

Using Bluetooth Mode ...............................................................................................................................15

Advanced Setup .........................................................................................................................................16

Wall-mounting ............................................................................................................................................17

Product Registration and Support ........................................................................................................... 19

Help & Troubleshooting ............................................................................................................................. 20

Limited Warranty .......................................................................................................................................21

Legal & Compliance ...................................................................................................................................24

Specications ............................................................................................................................................25

ENG - vi

Package Contents

Stereo RCA to

3.5mm Audio Cable

Wall Mount Template

VIZIO

Sound Bar

3.5mm to 3.5mm
Audio Cable

2 x Wall

Mount Screws

Remote Control

with 2x AAA Batteries

Digital Optical

Cable

User Manual Quick Setup Steps

Power Cable

2 x Wall

Mount Brackets

(Sound Bar)

ENG - 1

Controls & Connections

Back of Sound Bar

ENG - 2

Subwoofer Out

Power Port

Digital Optical

Audio In

AUX In

Analog Audio In
(Stereo 3.5mm)

*

Supports .WAV and .MP3 le format playback only.

Controls & Connections

USB* In

ENG - 3

Controls & Connections

Top of Sound Bar

Power

Press to turn on or o.

ENG - 4

Press to change the audio source.

Input

Bluetooth Input

Hold to pair.

(See ‘Bluetooth Pairing’ for more information.)

Increase or decrease the

Volume

loudness of the audio.

First-time Setup

1

*

Not all TVs have the audio outputs shown.

To connect the sound bar directly to your other
devices (Blu-ray player, game system, etc.) see

your device’s user manual.

Choose the best possible connection cable type and connect it to your TV.*

BEST

Digital Optical

Cable

Be sure the TV port is an audio

output, not an audio input.

**

OR

**

Some TVs do not pass through digital audio:

When using the digital input, if there is no audio, try:

• setting the TV output to PCM, or

• connecting directly to your Blu-ray or other source.

3.5mm to

RCA cable

ENG - 5

First-time Setup

Connect the power cable to the sound bar AC IN as shown.

2

Plug the power cable into an electrical outlet.

Back of Sound Bar

ENG - 6

First-time Setup

Remove the battery cover by gently

3

5

*Occurs only during rst-time set up.
**Auto detect function only occurs once when the sound bar is rst powered on. To enable this feature
again, you must do a Factory Reset (see the Using Button Combinations on page 12 for more
information) or press and hold the INPUT button for 4 seconds.

sliding it away from the remote.

To p To p

When needed, VIZIO recommends replacing the batteries that came
with this remote with two, new Duracell ‘AAA’ alkaline batteries.

After turning on both your TV and sound bar, it will automatically begin searching for an active input.*
The LED indicator on the front of the sound bar will begin cycling in different colors through inputs
until an audio source is detected.

Tip: Pressing the INPUT button will stop the auto
detect function.

You can press the INPUT button to switch between audio
sources. For example, if you connected your TV to Optical, set
the sound bar to Optical.

**

4

Insert the included batteries and gently
slide the battery cover back into place.

Input

Power

ENG - 7

Using the Remote

Change the input source.

(Long press for Auto Input Search)

Input

*

Power

Turn on or o.

Turns Virtual:X on/o.

Switches to Bluetooth mode.

(Long press for Pairing Mode)

Return to previous track.

(Changes audio settings)

Changes audio settings.

Cycle through EQ settings.

Press the Previous/Next buttons to

increase/decrease the bass level.

(Long press to turn LED power indicator and

ENG - 8

voice notications on/o)

Virtual:X

Bluetooth

Previous

Up/Down

EQ

Bass

Mute

Mute/unmute.

TruVolume

Turns TruVolume on/o.

OK

Select an option, play or pause.

(Long press for Info)

Next
Skip to the next track.

(Changes audio settings)

Night Mode
Press to turn mode on/o.

Treble
Press the Previous/Next buttons to
increase/decrease the treble level.

Volume +/-

Increase and decrease volume.

*Press INPUT and

Previous

to select previous input.

Proper Placement

For the best sound experience, position the sound bar as shown.

The sound bar should be close to ear level.

Sound bar should be centered below the TV.

ENG - 9

Mode & Level Settings

The LED indicators will behave differently with each function.

Function LED Behavior Description

Press the INPUT button to cycle through the available inputs. Press and hold the INPUT
button on the remote control for 4 seconds to enable the auto input detect function.

Input

The LED indicator
color will change per
specic input.

Specic inputs will show a dierent LED color:

• AUX In: Green

• Digital Optical: Red

LED Indicators are located here.

• Bluetooth: Blue

• USB: Orange

DTS TruVolume

Equalizer Mode

ENG - 10

Bluetooth

DTS Virtual:X

When searching for
device: ash from
bottom to top and back
continuously

TruVolume On

TruVolume O

Virtual:X On

Virtual:X O

Movie

Music

Dialogue

Press and hold the
minutes. You can now search for the sound bar (VIZIO SB3620n) using your Bluetooth
Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.

Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume
provides a consistent and comfortable volume level for a more enjoyable listening
experience.

Press the VRT:X button to enable/disable Virtual:X. When enabled (On), all inputs will
produce a virtual sound technology that simulates the eect of having overhead sound.
When disabled (O), all sources will playback in stereo.

Press the EQ button to toggle between preset equalizer settings: Movie, Music, Dialogue,
and Game. A voice notication will callout each mode.

Game

Note: Movie mode is on by default.

button on the remote. The sound bar will be discoverable for 15

Function LED Behavior Description

Press the BASS button and use the Next/Previous buttons to increase/decrease the bass
level. The LED indicators will move to the top with increasing level and to the bottom with

Bass Level

Two center LEDs
indicate bass level 0.

decreasing level.

If a subwoofer is connected, adjusting the bass level will also adjust the subwoofer level.
Consult your subwoofer’s user manual for additional adjustments that may optimize your
listening experience.

Mode & Level Settings

Treble Level

Night Mode

Dolby Audio

Detected

Two center LEDs
indicate treble level 0.

Night Mode On

Night Mode O

Dolby Audio audio
format is detected.

Press the TREB button and use the Next/Previous buttons to increase/decrease the
treble level. The LED indicators will move to the top with increasing level and to the bottom
with decreasing level.

Press the NIGHT button to enable/disable Night Mode. When enabled (On), the bass level
will be lowered on the sound bar. If an external subwoofer is connected, bass level will also
be lowered.

Note: Night mode will be turned O the next time the sound bar is turned On.

Dolby Audio is only available on the Digital Optical Audio In input. When a Dolby
Audio signal is detected, the Dolby Audio indicator LED will light up for 3 seconds
before fading away.

ENG - 11

Using Button Combinations

There are other functions that are triggered by different button combinations on the sound bar.

Buttons are located here.

Function LED Behavior Description

VIZIO TV Remote

Eco Power Mode

Speaker Test

ENG - 12

Factory

Reset

Control

All LEDs will

ash 3 times

Enable VIZIO
TV remote

Disable VIZIO
TV remote

Enable
Eco Power

Disable
Eco Power

—

Reset the sound bar to the factory default settings. To perform a Factory Reset,

Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds.

Note: This will erase all settings and preferences that you have set.

Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume
of the sound bar. To enable/disable this function, Press and Hold the Power (
Volume Up ( + ) buttons for 5 seconds.

When the Eco Power mode setting is enabled, the sound bar will automatically
power down after a period of inactivity. When disabled, the sound bar will remain
powered on until you turn it o. To enable/disable this function,
Power

( ) and Volume Down (—) buttons for 5 seconds.

Note: Eco Power Mode setting is ON by default.

Press and Hold

will begin calling out each speaker beginning with left (left and right). If any of these
are missing, check the connection and run the speaker test function again.

the Bluetooth( ) and Volume Up (+) buttons for 5 seconds. A voice

) and

Press and Hold

the

Programming the Sound Bar

You can program your sound bar to accept TV remote IR commands.

Function LED Behavior Description

Learn Volume Down

Waiting to learn:

Flash from bottom

Learn Volume Up

Learning conrmed:

All of the LEDs will

Learn Mute

Point both the sound bar and TV

remotes towards the front of the

sound bar when programming.

to top and back

continuously.

blink twice.

Press the OK and Volume Down buttons at the same time to put the sound
bar into learning mode. While the sound bar is in learning mode, press the Volume Down
button on the TV remote control.

Press the OK and Volume Up buttons at the same time to put the sound bar
into learning mode. While the sound bar is in learning mode, press the Volume Up button
on the TV remote control.

Press the OK and Volume Mute buttons at the same time to put the sound
bar into learning mode. While the sound bar is in learning mode, press the Mute button on
the TV remote control.

Turn o your TV speakers when
programming your sound bar.

Bluetooth Pairing

To pair the sound bar with a Bluetooth device:

1. Press and hold the Bluetooth button

2. Search for the sound bar (VIZIO SB3620n) using your Bluetooth device. For more information, refer to the user
documentation that came with the device.

3. Now you can play audio from your Bluetooth device. Volume can be controlled on both your source device and
the sound bar.

Bluetooth Device Button Located at the Top of Sound Bar

The LED indicators on the display panel on the front of the sound
bar will light up sequentially from bottom to top and back again.
Once the device is paired, the LED indicators will stop flashing.

on the sound bar or remote control for three (3) seconds.

ENG - 14

Using Bluetooth Mode

1. Your sound bar supports music streaming from devices with Bluetooth capability.

(Device compatibility will vary, see your device’s documentation for more information.)

2. Once you have paired your source device to the sound bar your device should remain paired (within range).

3. If the source is changed back to Bluetooth, any paired Bluetooth device will reconnect automatically.

4. If the input is changed, the Bluetooth device will disconnect.

Maximizing Signal

A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio

format, so streamed music may lose some integrity when compared to a wired connection. Try the following
if your sound quality is less than optimal:

• If you hear any break-up or disconnect while streaming music from your device, move the source device closer

to the sound bar.

• Be sure that there are no solid obstructions in the line-of-sight between the sound bar and the source device.

• Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video

baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve
Bluetooth range.

Your sound bar is not equipped with a
microphone, so it cannot operate as a
hands-free device for a smartphone.

Reduce the volume levels on your device and
on the sound bar before pressing Play. High
volume levels can damage your hearing.

ENG - 15

Advanced Setup

Digital Optical

Cable

Tablet/MP3 Player/Laptop

*

Supports .WAV and .MP3 le format playback only.

ENG - 16

3.5mm to

RCA Cable

Media Player

Game Console

USB Drive

*

1

2

Wall-mounting

Insert the two wall-mount screws into the screw holes in the sound bar, and then tighten
them with a Phillips screwdriver.

Wall-mount Screw Holes

Back of Sound Bar

Place the included wall mounting template against the wall under your TV.
Mark the two bracket holes using a pencil.

1202-000XXXX

ENG - 17

Wall-mounting

Screw the included bracket into to the bracket holes marked in Step 2.

3

Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete
anchors (for brick/concrete walls).

ENG - 18

Screws for attaching the bracket to the wall are
not included. Choose the screw type and length

appropriate to your home’s construction. If in doubt,
consult a professional installer.

Bracket Screw

(Not included with sound bar)

Suggested screw size: 3.5 mm diameter,

1.63" minimum length

Wall-mount Screw

(Included with sound bar)

Screw size: M4 x 8L

* Do not use any of the included screws for the wall mount installation. These are not intended for mounting.

*

Product Registration and Support

Register your sound bar.

Scan with your phone camera or QR reader.

Customized Support

Get assistance quickly with your information on hand.

News and Oers

Take advantage of the latest news and special oers from VIZIO.

Updates and Enhancements

Stay up-to-date with important product updates and notications.

More questions? Find answers at:

SUPPORT.VIZIO.COM

ENG - 19

Help & Troubleshooting

• Press the POWER button on the remote control or on the top of your sound bar.

There is no power.

There is no sound.

I hear buzzing or

humming.

The remote isn’t

working.

ENG - 20

• Ensure the power cord is securely connected.

• Plug a different device into the electrical outlet to verify that the outlet is working correctly.

• Increase the volume. Press VOLUME UP on the remote control or on the top of your sound bar.

• Press MUTE on the remote to ensure the sound bar is not muted.

• Press INPUT on the remote or on the top of your sound bar to select a different input source.

• When using the Digital Optical input, if there is no audio: (A) try setting the TV output to PCM or (B) connect
directly to your Blu-ray/other source, some TVs do not pass through digital audio.

• On digital inputs, the input LEDs will flash rapidly if an unsupported format is present.
Set the source to output PCM.

• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or
STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.

• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.

• Ensure all cables and wires are securely connected.

• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the
problem may be with the original device.

• Connect your device to a different input on the sound bar.

• Replace the remote batteries with new ones.

• Point the remote directly at the center of the sound bar when pressing a button.

• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming
application.

Limited Warranty

UNITED STATES
By using this VIZIO product, you accept all VIZIO Terms and Conditions, including all the Terms of Warranty, BINDING ARBITRATION AGREEMENT, and
Class Action Waiver. If you do not agree to the terms of this warranty, do not use the VIZIO product and, within thirty (30) days of the date of purchase, return it for a
refund to the authorized retailer where you purchased it. You have the right to opt out of the Arbitration Agreement and Class Action Waiver within 60 calendar
days of your purchase. Please refer to the full section “Binding Arbitration Agreement; Class Action Waiver” below for more details and instructions for opt-out. Full

Terms and Conditions may be viewed at vizio.com/en/terms/terms-of-service.

How Long This Warranty Lasts

For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO warrants
this product on the terms set forth below for ninety (90) days from the date of original purchase.

What This Warranty Covers

VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIO’s user guides and manuals.
Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized retailer in
the United States (including Puerto Rico). The product must also be located in the country where it was purchased at the time of warranty service.

How to Get Service

Before obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Customer Support by
going to support.vizio.com and selecting Contact Us. You can also call Customer Support (US): 855-209-4106.

Your Obligations Before Service

You must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show that the
product is within the warranty period.
When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that aords an equal degree of protection. VIZIO
Technical Support will provide instructions for packing and shipping the product to the VIZIO service center.
ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY
SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications.
Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO
recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer.

VIZIO’s Responsibilities

If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no charge for
parts or labor during the warranty period. Replacement parts may be new or recertied at VIZIO’s option and sole discretion. Replacement parts and VIZIO’s labor are
warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer.

Types of Service

Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover
return shipping to the customer.

ENG - 21

Limited Warranty

What This Warranty Does Not Cover

This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues;
(f) damage from shipping; (g) acts of God; (h) customer misuse, modications or adjustments; (i) installation, set-up, or repairs attempted by anyone other than by
a VIZIO authorized service center; (j) products with unreadable or removed serial numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”,
“CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.

What to Do If You Are Not Satised With Service

If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue
informally and wish to le a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the
procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim heard by a
judge or jury. Instead your claim will be heard by a neutral arbitrator.

Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)

UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM
RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH
OF THIS WARRANTY, OR THE VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY
THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN
ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more
about the American Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling 800-778-7879. Since this warranty concerns a transaction
in interstate or international commerce, the Federal Arbitration Act will apply.
The ling fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the American
Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys’ fees in connection with
any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies, then
you are entitled to recover attorneys’ fees as the arbitrator may determine.
The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration will
be Irvine, California, or your county of residence (if in the United States). The arbitrator will have no authority to award punitive or other damages not measured by the
prevailing party’s actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary
damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered
by the arbitrator will be binding and nal, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction.
Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without
the prior written consent of you and VIZIO.
ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO
PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY
OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY.
NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR
WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING.

ENG - 22

Limited Warranty

Opt-Out Instructions

IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty
(60) days of the date that you purchased the product; (2) your written notication must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and
(3) your written notication must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of
the binding arbitration agreement and class action waiver.
In addition, you may pursue a claim in small claims court in your county of residence (if in the United States) or in Orange County, California. In such case the provisions
of the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents)” will not apply.

Exclusions and Limitations

TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN
IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE,
ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE
OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

How the Law Applies

This warranty gives you specic legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the
greatest extent permitted by applicable law.

General

No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unenforceable, that term will
be severed from this warranty and all other terms will remain in eect. If the class action waiver is found to be unenforceable, then the entire section titled “Binding
Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” will not apply. This warranty applies to the maximum extent not prohibited by law.

Changes to Warranty

This warranty may change without notice, but any change will not aect your original warranty. Check www.vizio.com for the most current version.

ENG - 23

Legal & Compliance

FCC Class B Radio Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

Notice:

1. Any Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modication to this equipment. It is the responsibilities of the user to correct such
interference.

FCC RF Radiation Exposure Statement

1. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.

2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum

distance 20cm between the radiator & your body.

3. FCC RF Warning

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Battery Disposal and Recycling

You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and/ or a battery, it must be
disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. For more information, visit vizio.com/environment or
call [phone]..

Software Licenses

All software is provided subject to software license agreements and you agree that you will be bound by such license agreements in addition to other applicable terms of use. By using
the VIZIO products, you agree to the VIZIO Terms of Service and Privacy Policy. The VIZIO Terms of Use and Privacy Policy may be updated from time to time and are available to view at
vizio.com/terms

Export Regulations

Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”). The products may
also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received.

© 2021 VIZIO, Inc. All Rights Reserved.

This User Manual may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable eorts to ensure the accuracy of the information
provided herein. All product specications, functionality, features, congurations, performance, design and other product information described herein are subject to change without
notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors. To review the most updated version of this User Manual and the associated Quick Start Setup
guide, go to vizio.com.

VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc.

ENG - 24

and vizio.com/privacy, respectively.

Specications

Legal & Compliance

Sound Bar:

Connections:

Sound Pressure Level* (System):

Frequency Response (System): 50 Hz - 20 KHz

Voltage: 100-240Vac, 50/60Hz

Compliances: UL 62368-1, FCC PART15 Class B, Energy Star

*

Sound pressure level measured using pink noise at 1 meter, c-weighted.

" x 2.80" (43 x 71 mm) Full Range Driver for each channel (1 for left, 1 for right, )

One 1.70

One 3.5mm Stereo Audio
One Optical (Toslink)

91 dB

Bluetooth
One USB (Supports .WAV and .MP3 format only)

ENG - 25

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by VIZIO Inc. is under license. Other trademarks and trade names are those of their respective owners.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks
of Dolby Laboratories Licensing Corporation.

DTS® Virtual:X

Virtualized 3D Sound

DTS® TruVolume
Volume Leveling

ENG - 26

™

the Symbol together, Virtual:X, and the DTS Virtual:X logo are registered trademarks or trademarks of DTS, Inc. in
the United States and/or other countries. © DTS, Inc. All Rights Reserved.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and

®

the Symbol together, and TruVolume are registered trademarks and/or trademarks of DTS, Inc. in the United States
and/or other countries. © DTS, Inc. All Rights Reserved.

This product qualies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings
will be achieved. Changing the factory default settings or enabling other features will increase power consumption
that could exceed the limits necessary to qualify for ENERGY STAR rating. We want to help you save energy.

© 2021 VIZIO INC. ALL RIGHTS RESERVED.
210108SL