Vizio SB3251N-E0 User Manual

Page 1
QUICK START GUIDE
Model: SB3251n-E0
Please read this guide before using the product.
Page 2

IMPORTANT SAFETY INSTRUCTIONS

Your Unit is designed and manufactured to operate within dened design limits, and misuse may result in electric shock or re. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference.
• Read these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specied by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
To reduce the risk of electric shock or component damage, switch o the power before connecting other components to your Unit.
Unplug the power cord before cleaning your Unit. A damp cloth is sucient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not
use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before
turning on your Unit to avoid causing re, electric shock, or component damage.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided.
Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a re or electric shock. Never spill liquids on your Unit.
When connected to a power outlet, power is always owing into your Unit. To totally disconnect power, unplug the power cord.
Do not overload power strips and extension cords. Overloading can result in re or
electric shock.
The wall socket should be located near your Unit and be easily accessible
English - ii
Page 3
Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and
contact your dealer. Continuous use in this case may result in re or electric shock.
Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your unit yourself.
Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause re or electric shock.
Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause re or electric shock.
Ensure that the power cord and any other cables are unplugged before moving your Unit.
When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause re or
electric shock. When your Unit will not be used for an extended period of time, unplug the power cord.
To reduce risk of electric shock, do not touch the connector with wet hands.
Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote
control or injure the operator.
See the important note and rating located on the back of the unit.
WARNING - This equipment is not waterproof. To prevent a re or shock hazard, do not place any container lled with liquid near the equipment
(such as a vase or ower pot) or expose it to dripping, splashing, rain, or moisture.
CAUTION - Danger of explosion or re if batteries are mistreated. Replace only with the same or specied type.
Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or
dispose of it in re.
Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
The lighting ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the product that may be sucient magnitude to constitute a risk of shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
Warning: This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical
earth.
English - iii
Page 4

TABLE OF CONTENTS

Package contents ............................................................................................................................................5
Controls & Connections ..................................................................................................................................6
First-Time Setup...............................................................................................................................................10
Using the Remote ............................................................................................................................................17
Connecting with HDMI .................................................................................................................................... 18
LED Indicators .................................................................................................................................................. 20
Programming the Sound Bar .........................................................................................................................23
Using Button Combinations ...........................................................................................................................24
Bluetooth Pairing ..............................................................................................................................................25
Using Bluetooth mode ...............................................................................................................................26
Re-Linking the Subwoofer with the Sound Bar.............................................................................................27
Advanced Setup ...............................................................................................................................................28
Wall-Mounting the Sound Bar ........................................................................................................................ 29
Wall-Mounting the Satellite Speakers ...........................................................................................................31
Help & troubleshooting ..................................................................................................................................36
Limited Warranty .............................................................................................................................................37
Legal & Compliance ......................................................................................................................................... 41
English - iv
Page 5

PACKAGE CONTENTS

High Denition
Sound Bar
Stereo RCA to
3.5mm Audio Cable
2 x Power Cables
2 x Wall
Mount Brackets
(Satellite Speakers)
Subwoofer
Digital Optical
Cable
Mount Screws
2 x Wall
Mount Brackets
(Sound Bar)
Wireless
4 x Wall
Wall Mount Template
2 x Satellite
Speakers
HDMI Cable
Remote Control
with Batteries
2 x Satellite Speaker
Audio Cables
4 x Velco
Cable Ties
Quick Start Guide
English - 5
Page 6

CONTROLS & CONNECTIONS

Back of Sound Bar
SB3251n-E0
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby
Audio, and the double-D symbol are trademarks of Dolby Laboratories.
Laboratories.
1936-1300-3000 F
1936-1300-3000 F
SB3251n-E0
* Supports .WAV le format playback only.
English - 6
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
1936-1300-3000 F
SB3251n-E0
Power Port
USB*
USB In
Page 7
AUX
Analog Audio In
(Stereo 3.5mm)
HDMI OUT
HDMI Out (ARC)
This device complies with Part 15 of the FCC Rules. Operation is
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
CAN ICES-3 (B)/NMB-3(B)
Avis: Risque de choc electrique - ne pas ouvrir
Avis: Risque de choc electrique - ne pas ouvrir
PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR
PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR
Contains approved wireless module
Contains approved wireless module FCC ID: UOW-AB152X
FCC ID: UOW-AB152X IC: 6777A-AB152X
IC: 6777A-AB152X FCC ID: MDZ-WLL701X
FCC ID: MDZ-WLL701X IC: 7825A-AINSM5D2
IC: 7825A-AINSM5D2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
Avis: Risque de choc electrique - ne pas ouvrir
PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR
Contains approved wireless module FCC ID: UOW-AB152X IC: 6777A-AB152X FCC ID: MDZ-WLL701X IC: 7825A-AINSM5D2
1936-1101-8790 F
1936-1101-8790 F
1936-1101-8790 F
OPTICAL
Digital Optical Audio In
English - 7
Page 8
Power Press to turn sound bar
on or o.
English - 8
Volume Increase or decrease the
loudness of the audio.
Bluetooth Input Hold to pair.
(See ‘Bluetooth Pairing’ for more information.)
Input Press to change the audio source.
Top of Sound Bar
Page 9
Back of Subwoofer
Satellite Speaker Ports
(Connects to Satellite Speakers)
Pairing Button LED Indicator
Power Switch
Power Port
Back of Satellite Speaker
Satellite Speaker Port
(Connects to Subwoofer)
English - 9
Page 10

FIRST-TIME SETUP

1
CHOOSE ONE CABLE
GOOD
OR
BETTER
OR
BEST
AND CONNECT
IT TO YOUR TV*
English - 10
Back of Sound Bar
DIGITAL OPTICAL
CABLE
BETTER
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
1936-1300-3000 F
SB3251n-E0
3.5MM TO
RCA CABLE
GOOD
Connect the Sound Bar to your TV* using one of the connection types to the left. Choose the best possible connection type. Be sure the TV port is an audio output, not an audio input.
* Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to
your other devices (Blu-ray player, game system, etc) see your device’s user manual.
Page 11
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
Avis: Risque de choc electrique - ne pas ouvrir
PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR
Contains approved wireless module FCC ID: UOW-AB152X IC: 6777A-AB152X FCC ID: MDZ-WLL701X IC: 7825A-AINSM5D2
1936-1101-8790 F
HDMI ARC
CABLE
BEST
HDMI cables send Video (Out) and receive Audio from the TV. See the
for more information.
† When using the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM
or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through
digital audio.
Connecting with HDMI
section
English - 11
Page 12
English - 12
Connect the power cable to the sound bar
AC IN as shown.
2
Plug the power cable into an electrical out­let.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
1936-1300-3000 F
SB3251n-E0
Page 13
3
Connect the satellite speakers to the subwoofer using the included satellite speaker
audio cables.
Match the color coded speaker cable to the matching speaker port color.
English - 13
Page 14
4
Connect a power cable to the subwoofer.
English - 14
5
6
Plug the power cable into a power outlet.
Flip the power switch into the ON position.
Page 15
7
For the best surround sound experience, position the sound bar, subwoofer, and satellite speakers as shown. The sound bar should be close to ear level.
Sound Bar is centered below
Note: Speaker stands not included.
the TV.
English - 15
Page 16
8
Top Top
Remove the battery cover by gently
sliding it away from the remote.
When needed, VIZIO recommends
replacing the batteries that came
with this remote with two, new Duracell ‘AAA’ alkaline batteries.
9
Insert the included batteries and gently
slide the battery cover back into place.
10
Turn on your TV and sound bar. The sound bar will automatically begin searching for an active input.*
The LED indicators on the front of the sound bar will begin cycling
in pairs through inputs until an audio source is detected.**
Tip: Pressing the INPUT button will stop
the auto detect function.
You can press the INPUT button to switch between audio
sources. For example, if you connected your TV to AUX, set the sound bar to Aux.
*Occurs only during rst-time set up. **Auto detect function only occurs once when the sound bar is rst powered on. To enable this feature again, you must do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT
button for 3 seconds.
English - 16
InputPower
Page 17

USING THE REMOTE

Display
Displays Sound Bar Settings
Press to turn on or o.
Power
Input
*Press to change the input
source
Previous
Press to return to previous track.
(Changes audio settings in Menu)
Up/Down
Press to cycle through settings
and options
Mute
Press to mute/unmute.
Menu
Press to access the menu settings.
Enter/Play/Pause
Press to select an option.
Press to play or pause.
Next
Press to skip to the next track. (Changes audio settings in Menu)
Volume +/-
Press to increase and de-
crease volume.
*Press INPUT then Press INPUT then
Previous
to select previous input.
Next
to select Bluetooth input.
English - 17
Page 18

CONNECTING WITH HDMI

What is HDMI Audio Return Channel (ARC)?
Using HDMI ARC, your TV can send audio to the sound bar using an HDMI cable.
You will need to connect your sound bar to your TV’s HDMI ARC port using an HDMI cable that is ARC
compatible.
To connect using HDMI*:
1. Connect one end of the HDMI cable to the HDMI 1 (ARC) port on the back of your TV.
2. Connect the other end to the HDMI OUT (ARC) port on your VIZIO Sound Bar.
3. From the AUDIO menu on your TV, change the Digital Audio Setting to Dolby Digital or Bitstream.
4. From the SYSTEM menu, enable CEC and ARC (SAC)† functions.
5. From the CEC menu, select Device Discovery to register the sound bar with the TV.
If you want to use the volume buttons on the TV remote control to control the sound bar, enable System Audio Control from the CEC
menu.
*
The following steps are for use with a VIZIO TV, steps may dier by TV manufacturer. See your TV’s user manual for more information.
English - 18
CEC Function naming may dier by TV manufacturer. See your TV’s user manual for more information.
Page 19
Back of TV*
Connect to HDMI (ARC) port on your TV
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
Avis: Risque de choc electrique - ne pas ouvrir
PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR
Contains approved wireless module FCC ID: UOW-AB152X IC: 6777A-AB152X FCC ID: MDZ-WLL701X IC: 7825A-AINSM5D2
1936-1101-8790 F
* HDMI ARC port location may dier by TV manufacturer. See your TV’s user manual for more information.
English - 19
Page 20

LED INDICATORS

Press the Menu button and use the Up/Down Arrow buttons on the remote to access the dierent functions and acoustic settings of the sound bar. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators will behave dierently with each function.
LED Indicators are located here.
Function LED Behavior Description
Bluetooth Pairing
BT Pair
(When searching for device)
Flash from Bottom
to Top and back continuously.
Press the Enter button on the remote. The sound bar will be discoverable for 15 minutes. You can now search for the sound bar (VIZIO SB3251n) using your Bluetooth Device. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the sound bar.
Bass
Treble
Center
Surround Levels
Surround
English - 20
Bass Levels
Treble Levels
Center Levels
Two center LEDs indicate Bass level 0.
Two center LEDs indicate Treble level 0.
Two center LEDs
indicate Dialogue is centered.
Two center LEDs indicate Surround is centered.
Press the Next/Previous button to increase/decrease the bass level.
The LED indicators will move to the top with increasing levels and to the bottom with decreasing levels.
Press the Next/Previous button to increase/decrease the treble level. The LED indicators will move to the top with increasing levels and to the bottom with decreasing levels.
Press the Next/Previous button to increase/decrease the presence of dialog in the center channel.
The LED indicators will move to the top when the dialog presence is increased and to
the bottom when the dialog presence is decreased.
Press the Next/Previous button to increase/decrease the surround sound level. The LED
indicators will move to the top with increasing levels and to the bottom with decreasing levels. Note: Surround must be On to adjust the surround level.
Page 21
Function LED Behavior Description
Surround Balance
Surr Bal
Two center LEDs indicate Surround Balance is centered.
Press the Next/Previous button to increase/decrease the surround balance level on each
side. The LED indicators will move to the top with balance levels to the right and down with balance levels to the left.
Subwoofer Levels
Subwoofer
Equalizer Mode
EQ
Surround On/O
Surnd
TruVol
Night
AV Delay
DTS TruVolume
On/O
Night Mode On/
O
AV Delay
Two center LEDs
indicate Subwoofer
level 0.
LED at the bottom indicates no delay.
Music
Movie
Surround On
Surround O
TruVolume On
TruVolume O
Night Mode On
Night Mode O
Direct
Press the Next/Previous button to increase/decrease the level of the subwoofer.
The LED indicators will move to the top with increasing levels and to the bottom with decreasing levels. Note: Decreasing the level to the minimum turns o the sound bar.
Press the Next/Previous button to toggle between three preset equalizer settings, Music, Movie and Direct. Press Play/Pause to conrm. Note: Movie mode is on by default.
Press the Next/Previous button to enable/disable surround sound. When enabled (On), all inputs will produce 5.1 surround sound. When disabled (O), the satellite speakers will be disabled. Note: If EQ mode is set to Music and Surround is set to O, the sound bar will output 2.1 audio without center or satellites.
Press the Next/Previous button to enable/disable TruVolume. When enabled (On), TruVolume provides a consistent and comfortable volume level for a more enjoyable listening experience.
Press the Next/Previous button to enable/disable Night Mode. When enabled (On), the sound bar will lower bass frequency levels to provide a more quiet envi­ronment (ideal for apartment living and homes with sleeping children).
Press the Next/Previous button to increase/decrease the amount of audio delay. The LED indicators will move to the top with increasing audio delay levels.
English - 21
Page 22
Function LED Behavior Description
TV Remote
VZtv Rmt On
Program Remote
Prg Remote
Eco Power On/O
EcoPwr
Speaker Test
Spkr Test
Reset
Reset No
When a Dolby
Digital or DTS
signal is detected.
English - 22
TV Remote On
TV Remote O
−−
Eco Power On
Eco Power O
−−
Dolby Digital and DTS Indicator LED
Press the Next/Previous button to enable/disable VIZIO TV Remotes. When en­abled (On), you can use a VIZIO TV remote control to turn on the sound bar (using the TV Volume Up button) and control volume.
Press the Next/Previous and Play buttons to toggle and select and program
your TV remote to control the Volume Down, Volume Up, and Mute functions on your sound bar. See the
Press the Next/Previous button to enable/disable Eco Power Mode. When enabled (On), the sound bar will go into standby after a period of inactivity. The sound bar will automatically turn o when no audio signal is detected. O disables this feature.
Note: Enable this function if using a TV remote to control the sound bar or if you would like to cast content with need to manually turn on the sound bar.
Press the Play/Pause button to activate the speaker test function. A voice will begin calling out each speaker beginning with Right Front, Right Rear, Left Rear, and Subwoofer-white noise) If any of these
are
missing, check the connection and run the speaker test function again.
Press the Next/Previous and Play buttons to select and reset your remote and sound bar to the factory default settings. All paired Bluetooth devices will be un­paired. All programmed IR remotes will also be removed. See the
Default Settings
Dolby Digital and DTS are available on the HDMI ARC and Digital Optical Audio In inputs. When a Dolby Digital or DTS signal is detected, the Dolby Digital (White)
/ DTS (Amber) indicator LED will light up for 5 seconds before fading away.
section for more information.
Program Remote
section for more information.
left front
. (Left Front, Center,
Reset to Factory
Page 23

PROGRAMMING THE SOUND BAR

You can program your sound bar to accept TV remote IR commands. Press the Menu button on the remote, then use the Up/Down buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
Function LED Behavior Description
Learn Volume
Down
Learn Vol-
Learn Volume Up
Learn Vol+
Learn Mute
Learn Mute
Turn o your TV speakers when programming your sound bar.
(Waiting to learn)
Flash from bottom to top
and back continuously.
All of the LEDs will blink twice to conrm.
Press the Play button to put the sound bar into learning mode. While the sound bar is in learning mode, press the Volume Down button on the TV remote control. All of the LED Indicators on the sound bar will ash two times indicating that it has successfully recognized the TV remote.
Press the Play button to put the sound bar into learning mode. While the sound bar is in learning mode, press the Volume Up button on the TV remote control. All of the LED Indicators on the sound bar will ash two times indicating that it has successfully recognized the TV remote.
Press the Play button to put the sound bar into learning mode. While the sound bar is in learning mode, press the Mute button on the TV remote control. All of the LED Indicators on the sound bar will ash two times indicating that it has successfully recognized the TV remote.
Point both the sound bar and TV
remotes towards the front of the sound bar when programming.
English - 23
Page 24

USING BUTTON COMBINATIONS

Buttons are located here.
There are 3 functions that are triggered by 3 dierent button combinations on the sound bar.
Function LED Behavior Description
Reset the sound bar to the factory default settings. To perform a Factory
Press and Hold the Bluetooth( ) and Volume Down (—) buttons for
Factory
Reset
All 12 LEDs will
ash 3 times
Reset,
5 seconds.
Note: This will erase all settings and preferences that you have set.
English - 24
VIZIO TV Remote
Control
Energy
Star/
Ecomode
Enable VIZIO
TV Remote
Disable VIZIO
TV Remote
Enable
Energy Star
Disable Energy
Star
Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume of the sound bar. To enable/disable this function, Press and Hold the Power ( ) and Volume Up ( + ) buttons for 5 seconds.
When the Energy Star setting is enabled, the sound bar will automatically power down after a period of inactivity. When disabled, the sound bar will remain powered on until you turn it o. To enable/disable this function, Press and Hold the Power
for 5 seconds.
( ) and Volume Down (—) buttons
Note: Energy Star setting is enabled by default.
Page 25

BLUETOOTH PAIRING

To pair the sound bar with a Bluetooth device:
1. Press and hold the Bluetooth button
three (3) seconds or select the BT Pair option from the display remote menu. When the sound bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from bottom to top and back again.
Once the device is paired, the LED Indicators will stop ashing.
2. You can now search for the sound bar (VIZIO SB3251n) using your Bluetooth device. For more information, refer to the user documentation that came with the device.
3. Play audio from your Bluetooth device. Volume can be controlled on your source device and the sound bar.
Bluetooth Device
on the sound bar for
Top of Sound Bar
English - 25
Page 26

USING BLUETOOTH MODE

Your sound bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the sound bar, as long as you stay within range of the sound bar, your device should remain paired. If the input is changed, the Bluetooth device will disconnect. If the source is changed back to Bluetooth, any paired Bluetooth device will reconnect automatically.
Your sound bar is not equipped with a microphone, so it cannot operate as a hands-free device for a
smartphone.

Maximizing Signal

A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection.
Try the following if your sound quality is less than optimal:
If you hear any break-up or disconnect while streaming music from your device, move the source device closer to the sound bar.
Be sure that there are no solid obstructions in the line-of-sight between the sound bar and the
source device.
Other wireless devices can aect Bluetooth range, including wireless security cameras, wireless video baby monitors, cordless phones, and microwave ovens. Turning o or moving these devices may improve Bluetooth range.
Reduce the volume levels on your device and on the sound bar before pressing Play. High volume levels can damage your hearing.
English - 26
Page 27

RE-LINKING THE SUBWOOFER WITH THE SOUND BAR

The subwoofer has already been paired with the sound bar by VIZIO. However, they
may need to be re-linked if there is no sound coming from the subwoofer.
Turn o your TV speakers when programming your sound bar.
1 2
Top of Sound Bar
First conrm that the power switch is in the ON position. Press and hold the pairing button on the back of the sub-
woofer for 5 seconds. The LED on the back of the subwoof-
er will begin to blink.
Press and hold the power button on the top of the
sound bar for 5 seconds. The LED indicators on the front will ash 3 times. The subwoofer is now linked
with the sound bar.
English - 27
Page 28

ADVANCED SETUP

Back of Sound Bar
English - 28
USB Thumb
Drive*
SB3251n-E0
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
1936-1300-3000 F
SB3251n-E0
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
1936-1300-3000 F
RCA CABLE
HDMI CABLE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
Avis: Risque de choc electrique - ne pas ouvrir
PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR
Contains approved wireless module FCC ID: UOW-AB152X IC: 6777A-AB152X FCC ID: MDZ-WLL701X IC: 7825A-AINSM5D2
1936-1101-8790 F
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
Avis: Risque de choc electrique - ne pas ouvrir
PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR
Contains approved wireless module FCC ID: UOW-AB152X IC: 6777A-AB152X FCC ID: MDZ-WLL701X IC: 7825A-AINSM5D2
1936-1101-8790 F
Game Console Network Media Player Tablet/MP3 Player/Laptop
* Supports .WAV le format playback only.
DIGITAL OPTICAL
CABLE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
Avis: Risque de choc electrique - ne pas ouvrir
PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR
Contains approved wireless module FCC ID: UOW-AB152X IC: 6777A-AB152X FCC ID: MDZ-WLL701X IC: 7825A-AINSM5D2
Page 29

WALL-MOUNTING THE SOUND BAR

Wall-Mount Screw Holes
1
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
1936-1300-3000 F
Back of Sound Bar
SB3251n-E0
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
Avis: Risque de choc electrique - ne pas ouvrir
PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR
Contains approved wireless module FCC ID: UOW-AB152X IC: 6777A-AB152X FCC ID: MDZ-WLL701X IC: 7825A-AINSM5D2
1936-1101-8790 F
Insert the two wall-mount screws into the wall-mount screw holes, and then
tighten them with a Phillips screwdriver.
2
Place the included wall mounting template against the wall under your TV. Mark the four
bracket holes using a pencil.
English - 29
Page 30
3
English - 30
Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for brick/concrete walls).
Screws for attaching the brackets to the wall are not included. Choose the screw type and length appropriate to your home’s construction. If in doubt, consult a professional installer.
*Bracket Screw
NOT included with sound bar
Wall Mount Screw
Screw Size: M4 x 10
included with sound bar
If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer.
* Do not use any of the included screws for the wall mount installation. These are not intended for mounting.
Page 31

WALL-MOUNTING THE SATELLITE SPEAKERS

To wall-mount the satellite speakers:
1. Attach the wall mount screw to the back of the satellite speaker.
2. Attach the wall mount to the back of the satellite speaker.
3. Align and mount the satellite speaker with the wall mount bracket.
Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not
included.
Wall Mount Screw
If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a
professional installer.
Not Included
English - 31
Page 32

Take a moment to register your product

VIZIO.COM/PRODUCT-REGISTRATION

Why register?

Customized Support

Get assistance quickly with your information on hand.
News and Oers
Take advantage of the latest news and special oers from VIZIO.

Safety and Satisfaction

Stay up-to-date with important product updates and notications.
English - 32
Page 33

Award-Winning Customer Care At Your Convenience.

NEED HELP?
Go to: support.vizio.com
Find help with:
New product setup
• Connecting your devices
• Technical problems
• Product updates and more
Live chat support available
You can also contact our popular support team at:
Phone: (877) 698-4946 (toll-free)
Hours of Operation:
Monday - Friday: 7 am to 11 pm (CSt) Saturday - Sunday: 9 am to 6 p m (CSt)
Se habla Español • Nous parlons Français
English - 33
Page 34

VIZIO Recommends

Ultra Slim HDMI® Cable
The VIZIO Ultra Slim HDMI® Cable brings television, movies, sports, and gaming to
life with support for Ultra High Denition video and audio. Easily installed in tight spaces, these cables keep your entertainment setup tidy.
Available at VIZIO.com
English - 34
Page 35
VIZIO Recommends
SmartCast™ E-Series TV
Using the revolutionary VIZIO SmartCast app that turns your smartphone or tablet into your remote, E-Series lets you easily browse your favorite shows across multi­ple apps at once. Just tap to cast a show to your E-Series HDTV.
Available at VIZIO.com
English - 35
Page 36

HELP & TROUBLESHOOTING

Press the POWER button on the remote control or on the top of your Sound Bar.

There is no power.

There is no sound.

Ensure the power cord is securely connected.
Plug a dierent device into the electrical outlet to verify that the outlet is working correctly.
Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
Press MUTE on the remote to ensure the Sound Bar is not muted.
Press INPUT on the remote or on the top of your Sound Bar to select a dierent input source.
When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM
or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
On digital inputs, the input LEDs will ash rapidly if an unsupported format is present. Set the source to output PCM.
Your TV may be set to variable audio output. Conrm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.
I hear buzzing or
humming.

The remote isn’t working.

English - 36
Ensure all cables and wires are securely connected.
Connect a dierent source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does
not, the problem may be with the original device.
Connect your device to a dierent input on the Sound Bar.
Replace the remote batteries with new ones.
Point the remote directly at the center of the Sound Bar when pressing a button.
If using a Bluetooth connection, some of the buttons on the remote may not be supported by the
streaming application. (e.g., Pandora doesn’t support the Back button.)
Page 37

LIMITED WARRANTY

UNITED STATES AND CANADA

BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT. This warranty contains a binding arbitration agreement and a class action waiver for United States residents. If you live in the United States, the binding arbitration agreement and class action waiver aect your rights under this warranty. Please read the text under the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” carefully.

How Long This Warranty Lasts

For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set forth below for ninety (90) days from the date of original purchase.

What This Warranty Covers

VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIO’s user guides and manuals. Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized retailer in the United States (including Puerto Rico) or Canada. The product must also be located in the country where it was purchased at the time of warranty service.

How to Get Service

Before obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Technical Support via email at TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877-698-4946). The VIZIO Technical Support hours are 6:00AM to 9:00PM Monday through Friday and 7:00AM to 4:00PM Saturday and Sunday, Pacic Time.

Your Obligations Before Service

You must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show that the product is within the warranty period. When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that aords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the product to the VIZIO service center. ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications. Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer.

VIZIO’s Responsibilities

If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no
English - 37
Page 38
charge for parts or labor during the warranty period. Replacement parts may be new or recertied at VIZIO’s option and sole discretion. Replacement parts and VIZIO’s labor are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer.

Types of Service

Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer.

What This Warranty Does Not Cover

This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues; (f) damage from shipping; (g) acts of God; (h) customer misuse, modications or adjustments; (i) installation, set-up, or repairs attempted by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed serial numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
What to Do If You Are Not Satised With Service
If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue informally and wish to le a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim heard by a judge or jury. Instead your claim will be heard by a neutral arbitrator.

Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)

UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more about the American Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling 800-778-7879. Since this warranty concerns a transaction in interstate or international commerce, the Federal Arbitration Act will apply. The ling fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the American Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys’ fees in connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies, then you are entitled to recover attorneys’ fees as the arbitrator may determine. The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration will be Irvine, California, or your county of residence (if in the United States). The arbitrator will have no authority to award punitive or other damages not measured by the prevailing party’s actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator will be binding and nal, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO. ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY.
English - 38
Page 39
NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING. Exceptions to Binding Arbitration Agreement and Class Action Waiver IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of the date that you purchased the product; (2) your written notication must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and (3) your written notication must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of the binding arbitration agreement and class action waiver. In addition, you may pursue a claim in small claims court in your county of residence (if in the United States) or in Orange County, California. In such case the provisions of the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents)” will not apply.

Exclusions and Limitations

TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

How the Law Applies

This warranty gives you specic legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the greatest extent permitted by applicable law.

General

No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unenforceable, that term will be severed from this warranty and all other terms will remain in eect. If the class action waiver is found to be unenforceable, then the entire section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” will not apply. This warranty applies to the maximum extent not prohibited by law.

Changes to Warranty

This warranty may change without notice, but any change will not aect your original warranty. Check www.vizio.com for the most current version.
English - 39
Page 40
Specications
Sound Bar: One 2.0” x 3.7” Full Range Drivers for Each Channel (1 for left, 1 for
Satellite: One 2.2” High-Eciency Full-Range Driver (Each Satellite)
Subwoofer: One 5” Subwoofer Driver
right, 1 for center)
Inputs: One 3.5 mm Mini Jack Stereo
One Optical (Toslink) One HDMI (ARC) One USB (Supports .WAV format only) Bluetooth (Wireless)
Sound Pressure Level (System): 98 dB
Frequency Response (System): 50 Hz - 20 KHz
Voltage: 120 VAC, 60 Hz
Compliances: CSA, C-US, FCC/IC, Energy
Star
English - 40
Page 41

LEGAL & COMPLIANCE

FCC Class B Radio Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specied for point-to-point and
non point-to-point operation as appropriate.
Notice:
1. The changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equip­ment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modication to this equipment. It is the responsibilities of the
user to correct such interference.

RF Exposure Information

This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

IC Statement

1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
2. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
operation of the device.
English - 41
Page 42

IC Radiation Exposure Statement

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and oper­ated with minimum distance 20cm between the radiator & your body.

Disposal and Recycling

You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options.

Other:

Image(s) used under license from Shutterstock.com

Software Licenses

All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO’s privacy policy, which may be updated from time to time, and is available to view at http://www.vizio.com/privacy.

Export Regulations

Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”). The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received.

Internet Connectivity

Network conditions, environmental and other factors may negatively aect connectivity and the resulting video quality, if any.
Information in this Quick Start Guide is subject to change without notice. To review the most updated version of this Quick Start Guide and the associated User Manual, go to http://www.vizio.com.
© 2017 VIZIO, Inc. All Right Reserved.
This Quick Start Guide may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable eorts to ensure the accuracy of the information provided herein. All product specications, functionality, features, congurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors.
VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc.
HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Used under license.
Sound pressure level measured using pink noise at 1 meter, c-weighted.
VIZIO, Inc. has made reasonable eorts to ensure the accuracy of the information provided herein. All product specications, functionality, features, congurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors.
English - 42
Page 43
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruVolume is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
This product qualies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. We want to help you save energy.
English - 43
Page 44
© 2017 VIZIO INC. ALL RIGHTS RESERVED. 170125AD-US-
Loading...