Page 1
QUICK START GUIDE
Model: SB2920-D6E
Page 2
IMPORTANT SAFETY INSTRUCTIONS
Your Unit is designed and manufactured to operate within dened design limits, and misuse may
result in electric shock or re. To prevent your Unit from being damaged, the following rules should
be observed for its installation, use, and maintenance. Please read the following safety instructions
before operating your Unit. Keep these instructions in a safe place for future reference.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as when the power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
• To reduce the risk of electric shock or component damage, switch o the power before
connecting other components to your Unit.
• Unplug the power cord before cleaning your Unit. A damp cloth is sucient for cleaning. Do not
use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving your Unit from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on your Unit to avoid causing re,
electric shock, or component damage.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of your Unit and to protect it from overheating, be sure these openings
are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper
ventilation is provided.
• Never push any object into the slots and openings on your Unit enclosure. Do not place any
objects on the top of your Unit. Doing so could short circuit parts causing a re or electric shock.
• When connected to a power outlet, power is always owing into your Unit. To totally disconnect
power, unplug the power cord.
• Do not overload power strips and extension cords. Overloading can result in re or
electric shock.
• The wall socket should be located near your Unit and be easily accessible
• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water
penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in
this case may result in re or electric shock.
• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent,
unplug the power cord and contact your dealer immediately. Do not try to repair your
unit yourself.
• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing
is damaged, the internal components may function abnormally. Unplug the power cord
immediately and contact your dealer for repair. Continued use of your Unit may cause re or
electric shock.
• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in
environments with heavy dust or high humidity may cause re or electric shock.
• Ensure that the power cord and any other cables are unplugged before moving your Unit.
• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause re or electric shock. When your Unit will not be
used for an extended period of time, unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert the remote control batteries in accordance with instructions. Incorrect polarity may
cause the battery to leak which can damage the remote control or injure the operator.
• See the important note and rating located on the back of the unit.
• WARNING - This equipment is not waterproof. To prevent a re or shock hazard, do not place
any container lled with liquid near the equipment (such as a vase or ower pot) or expose it
to dripping, splashing, rain, or moisture.
• CAUTION - Danger of explosion or re if batteries are mistreated. Replace only with the same
or specied type.
• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and
windows closed. Do not disassemble the batteries or dispose of it in re.
• Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
Explanation of WARNING symbols:
The lighting ash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of not isolated dangerous voltage within the product
that may be sucient magnitude to constitute a risk of shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and servicing instructions in the literature
accompanying the appliance.
ENG - 2
Page 3
TABLE OF CONTENTS
Package Contents ..................................................................... 4
Controls & Connections ........................................................... 5
First-Time Setup........................................................................7
Using the Remote ................................................................... 10
LED Indicators .........................................................................11
Bluetooth Pairing ....................................................................13
Using Bluetooth Mode ...........................................................13
Advanced Setup ...................................................................... 14
Using Button Combinations ..................................................15
Wall-Mounting the Sound Bar ............................................... 16
Help & Troubleshooting .........................................................18
Limited Warranty ....................................................................19
Specications .......................................................................... 21
Legal & Compliance ................................................................22
ENG - 3
Page 4
PACKAGE CONTENTS
ENG - 4
High De nition Sound Bar Quick Start Guide
Power Adapter
2 x Sound Bar Wall
Mount Brackets
Remote Control with
2 x AAA Batteries
Stereo RCA to 3.5mm
Audio Cable
2 x Wall
Mount Screws
(Size: M4 x 10mm)
Digital Optical
Cable
Wall Mount
Template
Page 5
CONTROLS & CONNECTIONS
Back of Sound Bar
SUB OUT
Subwoofer Out
OPTICAL
Digital Optical
Audio In
DIGITAL
Coaxial In
* Supports .WAV le format playback only.
AUX
Analog Audio In
(Stereo 3.5mm)
AUX
Analog Audio In
(Stereo RCA)
USB*
USB In
Power Port
ENG - 5
Page 6
ENG - 6
Bluetooth Input Hold to pair.
(See ‘Bluetooth Pairing’ for more information.)
Volume Increase or decrease the loudness
of the audio.
Input Press to change the audio source.
Power Press to turn sound bar on or o .
Top of Sound Bar
Page 7
FIRST-TIME SETUP
CHOOSE ONE CABLE
1
GOOD
OR
BETTER
DIGITAL OPTICAL
CABLE
‡
BETTER
AND CONNECT
IT TO YOUR TV
Back of Sound Bar
DIGITAL COAXIAL
CABLE
*†
BETTER
3.5MM TO
RCA CABLE
GOOD
* Cable not included.
† Not all TVs have the audio outputs shown above. To connect the
Sound Bar directly to your other devices (Blu-Ray player, game
system, etc.) see your device’s user manual.
‡ When using either of the Digital Inputs, if there is no audio: (A)
try setting the TV output to PCM or (B) Connect directly to your
Blu-ray/other source, some TVs do not pass through digital audio.
3.5MM TO
RCA CABLE
GOOD
ENG - 7
Page 8
ENG - 8
Using Button Combinations
2
Connect the included power adapter
to the sound bar DC IN as shown.
Plug the power cable (suitable to
your region) into an electrical outlet.
Page 9
3
1. Remove the battery cover by gently sliding it
away from the remote.
2. Insert the included AAA batteries and gently slide
the battery cover back into place.
Top
When needed, VIZIO recommends replacing the batteries that came
with this remote with two, new Duracell ‘AAA’ alkaline batteries.
When initially connected to power, turn your TV on.
4
The sound bar will automatically turn on and begin
searching for an active input.
The LED indicators on the front of the sound bar will
begin cycling in pairs through inputs until an audio
source is detected.*
Tip: Pressing the INPUT button will
stop the auto detect function.
You can press the INPUT button to switch between
audio sources. For example, if you connected your
TV to Input 1, set the sound bar to Input 1.
* Auto detect function only occurs once when the Sound Bar is rst powered on. To enable this feature again, you must do a Factory
Reset (see the
Using Button Combinations
section for more information) or press and hold the INPUT button for 3 seconds.
Top
Power Input
ENG - 9
Page 10
USING THE REMOTE
Input
(Press and Hold for 3 seconds to enable the Auto Input Detection mode)
Press to change input source.
Power
Press to turn the sound bar on or o.
Volume +/-
Press to increase and decrease volume.
Previous
Press to return to previous track.
(Changes Treble and Bass levels)
TruVolume
Press to enable/disable TruVolume.
Bass
Press to enter bass adjustment mode.
Mute
Press to mute/unmute.
Bluetooth
Press to enter Bluetooth input.
(To enter force pair mode, press and hold for 5 seconds)
Enter/Play/Pause
Press to select an option.
Press to play or pause.
Next
Press to skip to the next track.
(Changes Treble and Bass levels)
TruSurround HD
Press to enable/disable TruSurround HD.
Treble
Press to enter treble adjustment mode.
EQ
Press to cycle between Movie and
Music audio modes.
(Movie mode is on by default)
ENG - 10
Page 11
LED INDICATORS
The LED Indicators will behave dierently with each button on the remote control.
Function LED Behavior Description
Press the INPUT button on the remote to cycle through the available inputs:
• Analog Audio In - AUX Stereo RCA (1)
Input
Coaxial In - Digital (3)
Analog Audio In - AUX (1)
Analog Audio In - AUX (2)
Digital Optical Audio In
Bluetooth
Optical (4)
• Analog Audio In - AUX Stereo 3.5mm (2)
• Coaxial In - Digital (3)
• Digital Optical Audio In - Optical (4)
• Bluetooth
USB In - USB (6)
• USB In - USB (6)
LED Indicators are located here.
Bluetooth
Pairing
DTS
TruVolume
On/O
(When searching for device)
Flash from the bottom to
top and back continuously.
TruVolume On
TruVolume O
Press and hold the button on the remote. The sound bar will be discoverable for 15
minutes. You can now search for the sound bar (VIZIO SB2920) using your Bluetooth
Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Press the TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and comfortable volume level
for a more enjoyable listening experience.
ENG - 11
Page 12
Function LED Behavior Description
DTS
TruSurround
On/O
Treble
Levels
Bass
Levels
EQ
Mode
TruSurround On
TruSurround O
Two center LEDs indicate
Treble level 0.
Two center LEDs indicate
Bass level 0.
Movie Mode
Music Mode
Press the TSHD button to enable/disable DTS TruSurround. When enabled (On),
all inputs will produce virtual surround sound. When disabled (O), all sources will
playback in stereo.
Press the TREBLE button then press the Next/Previous button to increase/decrease
the treble level. The LED indicators will move up with increasing levels and down with
decreasing levels.
Press the BASS button then press the Next/Previous button to increase/decrease
the bass level. The LED indicators will move up with increasing levels and down with
decreasing levels. If Bass is set to minimum, the external sub level will be set to o.
Press the EQ button to enable Movie or Music mode. When the four center LEDs are
lit, the preset audio settings for watching movies are enabled. When the four center
LEDs are not lit, the preset audio settings for listening to music are enabled.
Note: Movie mode is on by default.
ENG - 12
Page 13
BLUETOOTH PAIRING
To pair the sound bar with a Bluetooth device:
1. Press and hold the Bluetooth button
bar or the Bluetooth button
ve (5) seconds. When the sound bar is in Bluetooth
Pairing Mode, the LED Indicators on the Display Panel
on the front of the sound bar will light sequentially
from bottom to top and back again.
Once the device is paired, the LED Indicators will stop
ashing.
2. You can now search for the sound bar (VIZIO SB2920)
using your Bluetooth device. For more information, refer
to the user documentation that came with the device.
3. Play audio from your Bluetooth device. Volume can be
controlled on your source device and the sound bar.
on the remote for
on the sound
USING BLUETOOTH MODE
Your sound bar supports music streaming from
smartphones, tablets, and computers with Bluetooth
capability. Device compatibility will vary, see your
device’s documentation for more information. Once
you have paired your source device to the sound bar,
as long as you stay within range of the sound bar, your
device should remain paired, even if you change the
input on the sound bar.
Top of Sound Bar
Bluetooth Device
Your sound bar is not equipped with a
microphone, so it cannot operate as a
hands-free device for a smartphone.
ENG - 13
Page 14
Function LED Behavior Description
Factory
Reset
VIZIO TV
Remote
Control
EcoPower
ADVANCED SETUP
Back of Sound Bar
ENG - 14
DIGITAL OPTICAL
CABLE
DIGITAL COAXIAL
CABLE
Game Console Network Media
Player
3.5MM TO
RCA CABLE
3.5MM TO
RCA CABLE
Tablet/MP3 Player/Laptop USB Thumb
Drive*
* Supports .WAV le format playback only.
Page 15
USING BUTTON COMBINATIONS
Buttons are located here.
There are 3 functions that are triggered by 3 di erent button combinations on the Sound Bar.
Function LED Behavior Description
Reset the sound bar to the factory default settings. To perform a Factory
Factory
Reset
All 12 LEDs will
ash 3 times
Reset,
5 seconds.
Note: This will erase all settings and preferences that you have set.
Press and Hold the Bluetooth( ) and Volume Down (—) buttons for
VIZIO TV
Remote
Control
EcoPower
VIZIO TV
Remote Enabled
VIZIO TV
Remote Disable
EcoPower
Enabled
EcoPower
Disabled
Enable/disable the use of a VIZIO TV remote control to power on and
adjust the volume of the sound bar. To enable/disable this function,
Press and Hold the Power ( ) and Volume Up ( + ) buttons for 5 seconds.
Note: This function is enabled by default.
When the EcoPower setting is enabled, the sound bar will automatically
turn o after a period of inactivity as a power saving feature. When
disabled, the sound bar will remain powered on until you turn it o . To
enable/disable this function, Press and Hold the Power
( ) and Volume
Down (—) buttons for 5 seconds.
Note: The EcoPower setting is enabled by default.
ENG - 15
Page 16
WALL-MOUNTING THE SOUND BAR
1
Back of Sound Bar
2
Wall-Mount Screw Holes
Insert the two wall-mount screws into the wall-mount screw
holes, and then tighten them with a Phillips screwdriver.
ENG - 16
Place the included wall mounting template against the wall
under your TV. Mark the four bracket holes using a pencil.
Page 17
Be sure your screws are attached
22.58 in (57.36 cm)
to wood studs, drywall anchors
3
(for drywall), or concrete anchors
(for brick/concrete walls).
Screws for attaching the brackets
to the wall are not included.
Choose the screw type and length
appropriate to your home’s
construction. If in doubt, consult
a professional installer.
If you are unfamiliar with power tools or the
layout of electrical wiring in the walls of your
home, consult a professional installer.
Wall Mount Screw
Screw Size: M4 x 10
ENG - 17
Page 18
HELP & TROUBLESHOOTING
that cannot be lawfully changed or excluded under consumer law; or
against the person who sold the VIZIO product to you if that person has breached their sales contract with you.
• Press the POWER button on the remote control or on the top of your sound bar.
There is no power.
There is no sound.
• Ensure the power cord is securely connected.
• Plug a dierent device into the electrical outlet to verify that the outlet is working correctly.
• Increase the volume. Press Volume Up on the remote control or on the top of your sound bar.
• Press MUTE on the remote to ensure the sound bar is not muted.
• Press INPUT on the remote or on the top of your sound bar to select a dierent input source.
• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source, some TVs do not pass through digital audio.
• On digital inputs, the input LEDs will ash rapidly if an unsupported format is present. Set the source to output PCM.
• Your TV may be set to variable audio output. Conrm that the audio output setting is set to FIXED or STANDARD, not
VARIABLE. Consult your TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.
I hear buzzing or
humming.
The remote
isn’t working.
ENG - 18
• Ensure all cables and wires are securely connected.
• Connect a dierent source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be
with the original device.
• Connect your device to a dierent input on the sound bar.
• Replace the remote batteries with new ones.
• Point the remote directly at the center of the sound bar when pressing a button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application.
(e.g., Pandora doesn’t support the Back button.)
Page 19
LIMITED WARRANTY
PLEASE NOTE: This warranty is oered to you in addition to any rights and remedies that you may have under local consumer protection laws. Nothing in
this warranty limits or aects your legal rights including any rights:
• that cannot be lawfully changed or excluded under consumer law; or
• against the person who sold the VIZIO product to you if that person has breached their sales contract with you.
This warranty is oered by VIZIO, Inc. (“VIZIO”) and administered by Exertis (UK) Ltd (“Exertis”).
How Long This Warranty Lasts
For non-commercial use, VIZIO warrants the product on the terms set out below for two (2) years from the date of original purchase.
For commercial use, VIZIO warrants this product on the terms set out below for ninety (90) days from the date of original purchase.
What This Warranty Covers
VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIO’s user guides and
manuals.
Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an
authorized retailer in the UK and Ireland.
How to Get Additional Help and Troubleshooting
Please visit www.vizioaudio.uk for additional help and troubleshooting, provided by Exertis, Technology House, Magnesium Way, Hapton, Burnley, BB12
7BF, for technical support, please send an email to premiumaudio@exertis.co.uk.
Warranty Returns
To take advantage of the warranty during the warranty period, please return the product to the retailer where the product was purchased. When you
return a product to the retailer, you will need to provide your proof of purchase to the retailer who will then conrm that the product has been returned
within the warranty period. Your retailer will facilitate the return of the product to the manufacturer.
ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT ARE AT RISK OF BEING DELETED IN THE COURSE OF A WARRANTY SERVICE.
Your product may be restored to its original state or you may receive a replacement product. Recovery and reinstallation of user data and downloaded
applications is not covered under this warranty. You must ensure that all user data and downloaded applications are backed up before sending a product
back to the retailer you purchased from. You will be responsible for restoring all applicable user data and downloaded applications onto the product
returned to you. In case of replacement, VIZIO cannot guarantee that you will receive the same model of product. If your model is not available, a product
of equal value and similar style will be provided, or you may request a refund of the original purchase price. The warranty for the replacement product
ends two (2) years from the date the replacement is received.
VIZIO recommends that you always clear all data from the product before it is sent to back to the retailer.
ENG - 19
Page 20
What This Warranty Does Not Cover
Connections: 1 x 3.5 mm stereo audio
This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e)
signal issues; (f) damage from shipping; (g) acts of God; (h) customer misuse, modications or adjustments; (i) installation, set-up, or repairs attempted
by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed serial numbers; (k) products requiring routine
maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
Exclusions and Limitations
If you are a consumer and VIZIO fails to comply with these terms, to the extent permitted by law, VIZIO may be responsible for loss or damage you suer
that is a foreseeable result of VIZIO breaking the terms of this warranty or its failing to use reasonable care and skill, but VIZIO is not responsible for any
loss or damage that is not foreseeable.
If you are a business, to the greatest extent permitted by applicable law, any and all implied warranties, conditions or other terms including of
merchantability, satisfactory quality and tness for purpose are excluded. In addition, VIZIO will not be responsible for any loss of use, loss of information
or data, commercial loss, lost revenue or lost prots or indirect, special, incidental or consequential damages even if VIZIO has been advised of the
possibility of such damages.
Some countries, states, or provinces do not allow the exclusion of implied warranties or the limitation of incidental or consequential damages so the above
limitations and exclusions may be limited in their approach to you. When implied warranties may not be excluded in their entirety, they will be limited to
the duration of the applicable written warranty. This warranty gives you specic legal rights; you may have other rights that may vary depending on local
law. Your statutory rights are not aected.
General
No employee or agent of VIZIO may modify this warranty. If any term of this warranty is found to be unenforceable, that term will be severed from this
warranty and all other terms will remain in eect. This warranty applies to the maximum extent not prohibited by law.
ENG - 20
Page 21
SPECIFICATIONS
Sound bar: 2 x 5.80 cm full-range drivers
2 x passive radiators
Connections: 1 x 3.5 mm stereo audio
1 x RCA stereo audio
1 x Optical (Toslink)
1 x Coaxial digital audio
1 x USB
Bluetooth (wireless)
Sound Pressure Level
(System):
Frequency Response
(System):
Voltage: DC 16 V / 1,5 A
95 dB
75 Hz – 90 Hz to 20 KHz
ENG - 21
Page 22
LEGAL & COMPLIANCE
Declaration of Conformity (DoC)
Hereby, Vizio Inc
in compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU.
Eligible to bear the CE mark; Conforms to European Union
Low Voltage Directive 2014/35/EU; European Union EMC
Directive 2014/30/EU; European Union Restriction of
Hazardous Substances Recast (RoHS) Directive 2011/65/
EU; European Union WEEE Directive 2012/19/EU;European
Union Eco-Design Directive 2009/125/EC; European Union
Registration, Evaluation,Authorization and Restriction of
Chemicals (REACH) Directive 2006/121/EC; European Union
Radio Equipment Directive (RED), 2014/53/EU.
Type of wireless Frequency band Maximum power
Bluetooth
®
2402 – 2480 MHz 3 dBm
declares that this product is
(dBm E.I.R.P.)
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling
systems
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries must not be mixed with general
household waste. For proper treatment,
recovery and recycling of old products and
used batteries, please take them to applicable
collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable
resources and prevent any potential negative eects on human
health and the environment. For more information about
collection and recycling, please contact your local municipality.
Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
Note for the battery symbol (bottom symbol):
This symbol might be used in combination
with a chemical symbol. In this case it complies
with the requirement set by the Directive for
the chemical involved.
ENG - 22
Page 23
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by VIZIO,Inc. is under license. Other trademarks and trade names are those of
their respective owners.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
© 2018 VIZIO INC. ALL RIGHTS RESERVED.
181121SL
Loading...