VIZIO
QUICK START GUIDE
Model: SB2920-D6
IMPORTANT SAFETY INSTRUCTIONS
Your Unit is designed and manufactured to operate within dened design limits, and misuse may
result in electric shock or re. To prevent your Unit from being damaged, the following rules should
be observed for its installation, use, and maintenance. Please read the following safety instructions
before operating your Unit. Keep these instructions in a safe place for future reference.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as when the power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
• To reduce the risk of electric shock or component damage, switch o the power before
connecting other components to your Unit.
• Unplug the power cord before cleaning your Unit. A damp cloth is sucient for cleaning. Do not
use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving your Unit from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on your Unit to avoid causing re,
electric shock, or component damage.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of your Unit and to protect it from overheating, be sure these openings
are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper
ventilation is provided.
• Never push any object into the slots and openings on your Unit enclosure. Do not place any
objects on the top of your Unit. Doing so could short circuit parts causing a re or electric shock.
• When connected to a power outlet, power is always owing into your Unit. To totally disconnect
power, unplug the power cord.
• Do not overload power strips and extension cords. Overloading can result in re or
electric shock.
• The wall socket should be located near your Unit and be easily accessible
• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water
penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in
this case may result in re or electric shock.
• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent,
unplug the power cord and contact your dealer immediately. Do not try to repair your
unit yourself.
• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing
is damaged, the internal components may function abnormally. Unplug the power cord
immediately and contact your dealer for repair. Continued use of your Unit may cause re or
electric shock.
• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in
environments with heavy dust or high humidity may cause re or electric shock.
• Ensure that the power cord and any other cables are unplugged before moving your Unit.
• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause re or electric shock. When your Unit will not be
used for an extended period of time, unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert the remote control batteries in accordance with instructions. Incorrect polarity may
cause the battery to leak which can damage the remote control or injure the operator.
• See the important note and rating located on the back of the unit.
• WARNING - This equipment is not waterproof. To prevent a re or shock hazard, do not place
any container lled with liquid near the equipment (such as a vase or ower pot) or expose it
to dripping, splashing, rain, or moisture.
• CAUTION - Danger of explosion or re if batteries are mistreated. Replace only with the same
or specied type.
• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and
windows closed. Do not disassemble the batteries or dispose of it in re.
• Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
Explanation of WARNING symbols:
The lighting ash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of not isolated dangerous voltage within the product
that may be sucient magnitude to constitute a risk of shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and servicing instructions in the literature
accompanying the appliance.
TABLE OF CONTENTS
Package Contents ................................................................. 4
Controls & Connections ....................................................... 5
FIrst-Time Setup ...................................................................7
Using the Remote ................................................................. 11
LED Indicators .......................................................................12
Bluetooth Pairing ..................................................................14
Using Bluetooth mode ......................................................... 15
Advanced Setup ....................................................................16
Connecting a Subwoofer ....................................................17
Using Button Combinations ................................................18
Wall-Mounting the Sound Bar ............................................. 19
Help & Troubleshooting .......................................................21
Limited Warranty Information ............................................24
Legal Information ................................................................. 26
Specications ........................................................................ 27
PACKAGE CONTENTS
High Denition Sound Bar
Power Adapter
2 x Sound Bar
Wall Mount
Brackets
Remote Control with
2 x AAA Batteries
Stereo RCA
to 3.5mm
Audio Cable
2 x Wall
Mount Screws
(Size: M4 x 10mm)
4
Quick Start Guides
(1 English, 1 French/Spanish)
Digital Optical
Cable
Wall Mount
Template
CONTROLS & CONNECTIONS
Back of Sound Bar
SUB OUT
Subwoofer Out
OPTICAL
Digital Optical
Audio In
DIGITAL
Coaxial In
* Supports.WAVleformatplaybackonly.
AUX
Analog Audio In
(Stereo 3.5mm)
AUX
Analog Audio In
(Stereo RCA)
USB*
USB In
Power Port
5
Top of Sound Bar
Bluetooth Input Hold to pair.
(See ‘Bluetooth Pairing’ for more information.)
Volume Increase or decrease the loudness
of the audio.
Input Press to change the audio source.
Power Press to turn Sound Bar on or o.
6
FIRST-TIME SETUP
CHOOSE ONE CABLE
1
GOOD
OR
BETTER
DIGITAL OPTICAL
CABLE
‡
BETTER
AND CONNECT
IT TO YOUR TV
Back of Sound Bar
DIGITAL COAXIAL
CABLE
*†
BETTER
3.5MM TO
RCA CABLE
GOOD
* Cable not included.
† Not all TVs have the audio outputs shown above. To connect the
Sound Bar directly to your other devices (Blu-Ray player, game
system, etc.) see your device’s user manual.
‡ When using either of the Digital Inputs, if there is no audio: (A)
try setting the TV output to PCM or (B) Connect directly to your
Blu-ray/other source, some TVs do not pass through digital audio.
3.5MM TO
RCA CABLE
GOOD
7
2
Connect the included power adapter
to the Sound Bar DC IN as shown.
Plug the power adapter into an
electrical outlet.
8
3
For the best surround sound experience, position the Sound Bar as shown.
The Sound Bar should be close to ear level.
Sound Bar is centered
below the TV.
9
4
5
6
Top
Remove the battery cover by gently
sliding it away from the remote.
VIZIO recommends replacing the batteries that came with
this remote with two, new Duracell ‘AAA’ alkaline batteries.
Turn your TV on, the Sound Bar will automatically
turn on and begin searching for an active input.
The LED indicators on the front of the Sound Bar will
begin cycling in pairs through inputs until an audio
source is detected.*
Tip: Pressing the INPUT button will
stop the auto detect function.
You can press the INPUT button to switch between
audio sources. For example, if you connected your
TV to Input 1, set the Sound Bar to Input 1.
Top
Insert the included batteries and gently
slide the battery cover back into place.
Power Input
* Auto detect function only occurs once when the Sound Bar is rst powered on. To enable this feature again, you must do a Factory
Reset (see the
Using Button Combinations
section for more information) or press and hold the INPUT button for 3 seconds.
10
USING THE REMOTE
Input
(Press and Hold for 3 seconds to enable the Auto Input Detection mode)
Press to change input source.
Power
Press to turn the sound bar on or o.
Volume +/-
Press to increase and decrease volume.
Previous
Press to return to previous track.
(Changes Treble and Bass levels)
TruVolume
Press to enable/disable TruVolume.
Bass
Press to enter bass adjustment mode.
Mute
Press to mute/unmute.
Bluetooth
Press to enter Bluetooth input.
(To enter force pair mode, press and hold for 5 seconds)
Enter/Play/Pause
Press to select an option.
Press to play or pause.
Next
Press to skip to the next track.
(Changes Treble and Bass levels)
TruSurround HD
Press to enable/disable TruSurround HD.
Treble
Press to enter treble adjustment mode.
EQ
Press to cycle between Movie and
Music audio modes.
(Movie mode is on by default)
11
LED INDICATORS
The LED Indicators will behave dierently with each button on the remote control.
Function LED Behavior Description
Press the INPUT button on the remote to cycle through the available inputs:
• Analog Audio In - AUX Stereo RCA (1)
Input
Coaxial In - Digital (3)
Analog Audio In - AUX (1)
Analog Audio In - AUX (2)
Digital Optical Audio In
Bluetooth
Optical (4)
• Analog Audio In - AUX Stereo 3.5mm (2)
• Coaxial In - Digital (3)
• Digital Optical Audio In - Optical (4)
• Bluetooth
USB In - USB (6)
• USB In - USB (6)
LED Indicators are located here.
Bluetooth
Pairing
DTS
TruVolume
On/O
(When searching for device)
Flash from the bottom to
top and back continuously.
TruVolume On
TruVolume O
Press and hold the button on the remote. The Sound Bar will be discoverable for 15
minutes. You can now search for the Sound Bar (VIZIO SB2920) using your Bluetooth
Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Press the TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and comfortable volume level
for a more enjoyable listening experience.
12
Function LED Behavior Description
DTS
TruSurround
On/O
Treble
Levels
Bass
Levels
EQ
Mode
TruSurround On
TruSurround O
Two center LEDs indicate
Treble level 0.
Two center LEDs indicate
Bass level 0.
Movie Mode
Music Mode
Press the TSHD button to enable/disable DTS TruSurround. When enabled (On),
all inputs will produce virtual surround sound. When disabled (O), all sources will
playback in stereo.
Press the TREBLE button then press the Next/Previous button to increase/decrease
the treble level. The LED indicators will move up with increasing levels and down with
decreasing levels.
Press the BASS button then press the Next/Previous button to increase/decrease
the bass level. The LED indicators will move up with increasing levels and down with
decreasing levels. If Bass is set to minimum, the external sub level will be set to o.
Press the EQ button to enable Movie or Music mode. When the four center LEDs are
lit, the preset audio settings for watching movies are enabled. When the four center
LEDs are not lit, the preset audio settings for listening to music are enabled.
Note: Movie mode is on by default.
13
BLUETOOTH PAIRING
To pair the Sound Bar with a Bluetooth device:
1. Press and hold the Bluetooth button on the Sound
Bar or the Bluetooth button on the remote for
ve (5) seconds. When the Sound Bar is in Bluetooth
Pairing Mode, the LED Indicators on the Display Panel
on the front of the Sound Bar will light sequentially
from bottom to top and back again.
Once the device is paired, the LED Indicators will stop
ashing.
2. You can now search for the Sound Bar (VIZIO SB2920)
using your Bluetooth device. For more information, refer
to the user documentation that came with the device.
3. Play audio from your Bluetooth device. Volume can be
controlled on your source device and the Sound Bar.
Bluetooth Device
Top of Sound Bar
14
USING BLUETOOTH MODE
Your Sound Bar supports music streaming from
smartphones, tablets, and computers with Bluetooth
capability. Device compatibility will vary, see your
device’s documentation for more information. Once
you have paired your source device to the Sound Bar,
as long as you stay within range of the Sound Bar, your
device should remain paired, even if you change the
input on the Sound Bar.
Your Sound Bar is not equipped with a
microphone, so it cannot operate as a
hands-free device for a smartphone.
Maximizing Signal
A Bluetooth signal has a range of up to 30 feet. Keep
in mind that Bluetooth is a compressed audio format,
so streamed music may lose some integrity when
compared to a wired connection.
Try the following if your sound quality is less than
optimal:
• If you hear any break-up or disconnect while streaming music from
your device, move the source device closer to the Sound Bar.
• Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source device.
• Other wireless devices can aect Bluetooth range, including wireless
security cameras, wireless video baby monitors, cordless phones, and
microwave ovens. Turning o or moving these devices may improve
Bluetooth range.
Reduce the volume levels on your device
and on the Sound Bar before pressing
Play. High volume levels can damage your
hearing.
15
ADVANCED SETUP
Back of Sound Bar
DIGITAL OPTICAL
CABLE
DIGITAL COAXIAL
CABLE
Game Console Network Media
Player
* Supports .WAV le format playback only.
3.5MM TO
RCA CABLE
3.5MM TO
RCA CABLE
Tablet/MP3 Player/Laptop USB Thumb
Drive*
16
CONNECTING A SUBWOOFER
Back of Sound Bar
To connect a subwoofer:
1. Press the BASS button on the remote control to enter bass
adjustment mode.
2. Use the Previous/Next buttons to adjust the bass level to the
center position.
3. Power O the Sound Bar and Subwoofer. Connect an RCA cable
from the Sound Bar to the Subwoofer.
4. Power On the Sound Bar and Subwoofer.
5. Manually adjust the SUB gain (Volume) and phase to your
preference. See your subwoofer’s user manual for more
information.
6. Use the BASS button on the remote control to adjust the
subwoofer’s output.
If Bass is set to minimum, the external sub level will be set to o.
RCA Subwoofer Cable*
Optional Subwoofer*
17
* RCA subwoofer cable and subwoofer not included.
USING BUTTON COMBINATIONS
Buttons are located here.
There are 3 functions that are triggered by 3 dierent button combinations on the Sound Bar.
Function LED Behavior Description
Reset the Sound Bar to the factory default settings. To perform a Factory
Factory
Reset
All 12 LEDs will
ash 3 times
Reset,
5 seconds.
Note: This will erase all settings and preferences that you have set.
Press and Hold the Bluetooth( ) and Volume Down (—) buttons for
VIZIO TV
Remote
Control
Energy
Star
VIZIO TV
Remote Enabled
VIZIO TV
Remote Disable
Energy Star
Enabled
Energy Star
Disabled
Enable/disable the use of a VIZIO TV remote control to power on and
adjust the volume of the sound bar. To enable/disable this function,
Press and Hold the Power ( ) and Volume Up ( + ) buttons for 5 seconds.
Note: This function is enabled by default.
When the Energy Star setting is enabled, the sound bar will automatically
power down after a period of inactivity. When disabled, the sound bar
will remain powered on until you turn it o. To enable/disable this
function, Press and Hold the Power
( ) and Volume Down (—) buttons
for 5 seconds.
Note: Energy Star setting is enabled by default.
18
WALL-MOUNTING THE SOUND BAR
1
Back of Sound Bar
2
Wall-Mount Screw Holes
Insert the two wall-mount screws into the wall-mount screw
holes, and then tighten them with a Phillips screwdriver.
Place the included wall mounting template against the wall
under your TV. Mark the four bracket holes using a pencil.
19
Be sure your screws are attached
to wood studs, drywall anchors
3
(for drywall), or concrete anchors
(for brick/concrete walls).
Screws for attaching the brackets to the wall are not included.
Choose the screw type and length
appropriate to your home’s
construction. If in doubt, consult a
professional installer.
22.58 in (57.36 cm)
If you are unfamiliar with power tools or the
layout of electrical wiring in the walls of your
home, consult a professional installer.
20
Wall Mount Screw
Screw Size: M4 x 10
HELP & TROUBLESHOOTING
• Press the POWER button on the remote control or on the top of your Sound Bar.
There is no power.
There is no sound.
• Ensure the power cord is securely connected.
• Plug a dierent device into the electrical outlet to verify that the outlet is working correctly.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote or on the top of your Sound Bar to select a dierent input source.
• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source, some TVs do not pass through digital audio.
• On digital inputs, the input LEDs will ash rapidly if an unsupported format is present. Set the source to output PCM.
• Your TV may be set to variable audio output. Conrm that the audio output setting is set to FIXED or STANDARD, not
VARIABLE. Consult your TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.
I hear buzzing or
humming.
The remote
isn’t working.
• Ensure all cables and wires are securely connected.
• Connect a dierent source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be
with the original device.
• Connect your device to a dierent input on the Sound Bar.
• Replace the remote batteries with new ones.
• Point the remote directly at the center of the Sound Bar when pressing a button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application.
(e.g., Pandora doesn’t support the Back button.)
21
Do You Have Questions? Find Answers At
SUPPORT.VIZIO.COM
Find help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• Product Updates
• And More
Live Chat
Support Available
You can also contact our
award-winning support team at:
Phone: (877) 878-4946 (TOLL-FREE)
Hours Of Operation:
Monday - Friday: 7 am T O 11 pm (CST)
Saturday - Sunday: 9 am T O 6 pm (CST)
Take A Moment To Register Your Product At
VIZIO.COM/PRODUCT-REGISTRATION
Why Register?
Customized Support
Get assistance quickly with your information on-hand.
News & Offers
Take advantage of the latest news and special offers from VIZIO.
Safety & Satisfaction
Stay up to date with important product updates and notifications.
REGISTER YOUR VIZIO PRODUCT NOW
LIMITED WARRANTY INFORMATION
UNITED STATES AND CANADA
BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF
THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY
CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE
VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT
FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
This warranty contains a binding arbitration agreement and a class action waiver for
United States residents. If you live in the United States, the binding arbitration agreement
and class action waiver aect your rights under this warranty. Please read the text under
the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents
Only)” carefully.
How Long This Warranty Lasts
For non-commercial use, VIZIO warrants the product on the terms set forth below for
one (1) year from the date of original purchase. For commercial use, VIZIO warrants
this product on the terms set forth below for ninety (90) days from the date of original
purchase.
What This Warranty Covers
VIZIO warrants the product against defects in materials and workmanship when the
product is used normally in accordance with VIZIO’s user guides and manuals.
Except where restricted by law, this warranty applies only to the original purchaser of
a new product. The purchase must have been made from an authorized retailer in the
United States (including Puerto Rico) or Canada. The product must also be located in the
country where it was purchased at the time of warranty service.
How to Get Service
Before obtaining warranty service, you may visit www.vizio.com for additional help and
troubleshooting. To obtain warranty service, contact VIZIO Technical Support via email
at TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877-698-4946). The VIZIO
Technical Support hours are 6:00AM to 9:00PM Monday through Friday and 7:00AM to
4:00PM Saturday and Sunday, Pacic Time.
Your Obligations Before Service
You must obtain pre-authorization before sending your product to a VIZIO service center.
You may be required to supply a purchase receipt (or copy) to show that the product is
within the warranty period.
When you return a product to a VIZIO service center, you must ship the product in its
original packaging or in packaging that aords an equal degree of protection. VIZIO
Technical Support will provide instructions for packing and shipping the product to the
VIZIO service center.
ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE
DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If
this occurs, your product will be restored to its original state. You will be responsible for
restoring all applicable user data and downloaded applications. Recovery and reinstallation
of user data and downloaded applications is not covered under this warranty. In order to
protect your personal information, VIZIO recommends that you always clear all personal
information from the product before it is serviced, regardless of the servicer.
VIZIO’s Responsibilities
If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option)
repair or replace it, or refund the purchase price to you. There will be no charge for parts
or labor during the warranty period. Replacement parts may be new or recertied at
VIZIO’s option and sole discretion. Replacement parts and VIZIO’s labor are warranted
for the remaining portion of the original warranty or for ninety (90) days from warranty
service, whichever is longer.
Types of Service
Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not
responsible for transportation costs to the service center, but VIZIO will cover return
shipping to the customer.
What This Warranty Does Not Cover
This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper
operation; (d) improper voltage supply or power surges; (e) signal issues; (f) damage from
shipping; (g) acts of God; (h) customer misuse, modications or adjustments; (i) installation,
set-up, or repairs attempted by anyone other than by a VIZIO authorized service center;
(j) products with unreadable or removed serial numbers; (k) products requiring routine
maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY RECERTIFIED”, or by a
non-authorized reseller.
What to Do If You Are Not Satised With Service
If you feel VIZIO has not met its obligations under this warranty, you may attempt to
resolve the issue informally with VIZIO. If you are unable to resolve the issue informally
and wish to le a formal claim against VIZIO, and if you are a resident of the United States,
you must submit your claim to binding arbitration according to the procedures described
below, unless an exception applies. Submitting a claim to binding arbitration means that
you do not have the right to have your claim heard by a judge or jury. Instead your claim
will be heard by a neutral arbitrator.
Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)
UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE
OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY
WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING
OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE
VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING
ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND
CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION
ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS
SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn
more about the American Arbitration Association and its rules for arbitration by visiting
www.adr.org or by calling 800-778-7879. Since this warranty concerns a transaction in
24
interstate or international commerce, the Federal Arbitration Act will apply.
The ling fees to begin and carry out arbitration will be shared between you and VIZIO, but
in no event will your fees ever exceed the amount allowable by the American Arbitration
Association, at which point VIZIO will cover all additional administrative fees and expenses.
VIZIO waives its right to recover attorneys’ fees in connection with any arbitration under
this warranty. If you are the prevailing party in an arbitration to which the Supplementary
Procedures for Consumer-Related Disputes applies, then you are entitled to recover
attorneys’ fees as the arbitrator may determine.
The dispute will be governed by the laws of the state or territory in which you resided at
the time of your purchase (if in the United States). The place of arbitration will be Irvine,
California, or your county of residence (if in the United States). The arbitrator will have
no authority to award punitive or other damages not measured by the prevailing party’s
actual damages, except as may be required by statute. The arbitrator will not award
consequential damages, and any award will be limited to monetary damages and will
include no equitable relief, injunction, or direction to any party other than the direction
to pay a monetary amount. Judgment on the award rendered by the arbitrator will be
binding and nal, except for any right of appeal provided by the Federal Arbitration Act,
and may be entered in any court having jurisdiction. Except as may be required by law,
neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of
any arbitration under this warranty without the prior written consent of you and VIZIO.
ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE
CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY
WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS
ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN
WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY.
NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED
WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT
OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING.
Exceptions to Binding Arbitration Agreement and Class Action Waiver
IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND
CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of
the date that you purchased the product; (2) your written notication must be mailed to
VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and (3) your written notication
must include (a) your name, (b) your address, (c) the date you purchased the product, and
(d) a clear statement that you wish to opt out of the binding arbitration agreement and
class action waiver.
In addition, you may pursue a claim in small claims court in your county of residence (if
in the United States) or in Orange County, California. In such case the provisions of the
section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents)” will
not apply.
Exclusions and Limitations
TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS
WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU.
VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA,
COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL
PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING
FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE,
OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR
LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION,
REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED,
SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU.
How the Law Applies
This warranty gives you specic legal rights, and you may also have other rights, which
vary from state to state and province to province. This warranty applies to the greatest
extent permitted by applicable law.
General
No employee or agent of VIZIO may modify this warranty. If any term of this warranty,
other than the class action waiver, is found to be unenforceable, that term will be severed
from this warranty and all other terms will remain in eect. If the class action waiver is
found to be unenforceable, then the entire section titled “Binding Arbitration Agreement;
Class Action Waiver (U.S. Residents Only)” will not apply. This warranty applies to the
maximum extent not prohibited by law.
Changes to Warranty
This warranty may change without notice, but any change will not aect your original
warranty. Check www.vizio.com for the most current version.
25
LEGAL INFORMATION
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.This device
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice:
1. The changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modication to this equipment. It is the responsibilities of the
user to correct such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government. This device complies with FCC radiation exposure limits set
forth for an uncontrolled environment.
IC Statement
1. This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
2. Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
3. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations.
Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about
disposal and recycling options.
Export Regulations
Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”). The
products may also be subject to the customs and export control laws and regulations
of the country in which the products are manufactured and/or received.
© 2016 VIZIO, Inc. All Right Reserved.
Image(s) used under license from Shutterstock.com
VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks
or registered trademarks of VIZIO, Inc.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. Used under license.
This Quick Start Guide may not be copied in whole or in part without the writ-
ten permission of VIZIO, Inc. VIZIO, Inc. has made reasonable eorts to ensure
the accuracy of the information provided herein. All product specications,
functionality, features, congurations, performance, design and other product
information described herein are subject to change without notice. VIZIO, Inc.
is not responsible for typographical, technical, or descriptive errors.
Sound pressure level measured using pink noise at 1 meter, c-weighted.
26
SPECIFICATIONS
Sound Bar: 2 x 2½” Full-Range Drivers, 2 x Passive Radiators
1 x 3.5mm Stereo Audio
1 x RCA Stereo Audio
Inputs:
Sound Pressure
Level (System):
1 x Optical (Toslink)
1 x Digital Coaxial Audio
1 x USB
Bluetooth (Wireless)
95 dB
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Inc. DTS, the Symbol, & DTS and
the Symbol together are registered trademarks, and
DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Inc. DTS, the Symbol, & DTS and
the Symbol together are registered trademarks, and
DTS TruVolume is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
Frequency
Response (System):
75 Hz - 90 Hz to 19 KHz
Voltage: DC 16V / 1.5A
Compliances: UL, FCC, cUL, NRCAN
This product qualies for ENERGY STAR in the “factory
default” setting and this is the setting in which power savings
will be achieved. Changing the factory default settings or
enabling other features will increase power consumption
that could exceed the limits necessary to qualify for
ENERGY STAR rating.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc.
Used under license.
27
© 2016 VIZIO INC. ALL RIGHTS RESERVED.
160310OC-US-A
Loading...