Vivotek PT71373GPP-ISMA User Manual
I P S u r v e i l l a n c e
PT7137
3GPP/ISMA
Wireless Pan/Tilt Network Camera
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Product Name: Network Camera (
Release Date: 2007/11/19
Manual Revision: 2.0
Web Site: www.vivotek.com
Email: technical@vivotek.com
Made in Taiwan. © 2007 VIVOTEK INC. All rights reserved
1 - User's Manual
sales@vivotek.com
PT7137
)
- 2 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Before You Use This Product
The use of surveillance devices may be prohibited by law in your country. The
Network Camera is not only a high-performance web-ready camera but also can be
part of a flexible surveillance system. It is the user’s responsibility to ensure that the
operation of such devices is legal before installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the
list in the "Package Contents" chapter. Take notice of the warnings in “Quick
installation guide” before the Network Camera is installed, then carefully read and
follow the instructions in the “Installation” chapter to avoid damages due to faulty
assembly and installation. This also ensures the product is used properly as
intended.
The Network Camera is a network device and its use should be straightforward for
those who have basic network knowledge. The “Troubleshooting” chapter in the
Appendix provides remedies to the most common errors in set up and configuration.
You should consult this chapter first if you run into a system error.
The Network Camera is designed for various applications including video sharing,
general security/surveillance, etc. The “How to Use” chapter suggests ways to best
utilize the Network Camera and ensure proper operations. For the creative and
professional developers, the "URL Commands of The Network Camera " chapter
serves to be a helpful reference to customize existing homepages or integrating with
the current web server.
For paragraphs preceded by the reader should use caution to understand
completely the warnings. Ignoring the warnings may result in serious hazards or
injuries.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 2
- 3 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Table of Contents
Before You Use This Product......................................................................2
Package Contents....................................................................................6
Installation.............................................................................................7
Hardware installation..........................................................................7
Software Installation ..........................................................................9
Initial Access to the Network Camera.................................................. 13
Check Network Settings ..............................................................13
Add Password to Prevent Unauthorized Access................................13
How to Use .....................................................................................14
Authentication............................................................................ 14
Installing plug-in..............................................................................15
Primary user’s capability ................................................................... 16
Main Screen with Camera View.....................................................16
Client settings............................................................................ 20
Administrator’s capability .................................................................. 23
Fine-tuning for Best Performance.................................................. 23
Opening accounts for new users ................................................... 26
Build a security application ..........................................................27
Software revision upgrade ........................................................... 28
Definitions in Configuration.....................................................................29
System parameters..........................................................................30
Security settings..............................................................................31
Network settings..............................................................................32
Network type............................................................................. 32
HTTP ........................................................................................ 33
RTSP Streaming ......................................................................... 33
WLAN Configuration.................................................................... 36
DDNS............................................................................................. 39
Access List...................................................................................... 40
Audio and Video............................................................................... 41
General..................................................................................... 41
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
3 - User's Manual
- 4 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Video Settings............................................................................ 41
Video orientation........................................................................41
Audio settings............................................................................42
Image Settings ..........................................................................43
Camera Control ............................................................................... 44
Email & FTP .................................................................................... 46
Email........................................................................................46
FTP .......................................................................................... 46
Motion detection ..............................................................................48
Application settings ..........................................................................49
Snapshot................................................................................... 49
Weekly schedule.........................................................................50
Snapshot file name prefix ............................................................50
Send out the snapshot while motion detection ................................50
Sequential operation...................................................................50
Method for sending snapshot........................................................50
Video Clip..................................................................................52
System log...................................................................................... 54
Viewing system parameters...............................................................55
Maintenance....................................................................................56
Appendix..............................................................................................57
A. Troubleshooting ........................................................................... 57
Status LED ................................................................................57
Reset and restore....................................................................... 57
B. URL commands of the Network Camera...........................................58
Get server parameter values........................................................58
Set server parameter values ........................................................ 59
Available parameters on the server ...............................................61
Camera Control..........................................................................72
Recall ....................................................................................... 73
Application page CGI command ....................................................74
Capture single snapshot ..............................................................77
Account management .................................................................77
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 4
- 5 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
System logs...............................................................................78
Configuration file........................................................................79
Upgrade firmware.......................................................................80
C. Technical specifications .................................................................81
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
5 - User's Manual
- 6 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Package Contents
PT7137
Software CD
Power adapter
Quick installation guide
Mounting Kit & Pads
Warranty card
Antenna
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 6
Installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant
user access to the camera.
Hardware installation
Please verify that your product package contains all the
accessories listed in the foregoing Package Contents.
Depending on the user’s application, an Ethernet cable
may be needed. The Ethernet cable should meet the specs
of UTP Category 5 and not exceed 100 meters in length.
Upon powering up, the front red LED will become lighted first and then the device will go
through booting process. During the booting process, red, blue and green LEDs will be
on. After booted, the Network Camera will standby for getting IP address. After getting IP
Address, the green LED will blink every second.
The Network Camera will first detect Ethernet. If it does not connect to Ethernet, the
Network Camera will try WLAN. During the searching and connecting process to the
wireless access point or station, the red LED of the Network Camera will flash every
second. Until the Network Camera connects to the other wireless device, the red LED
Connect the power adapter jack to the Network
Camera before plugging in to the power socket. This will
reduce the risk of accidental electric shock.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
7 - User's Manual
- 8 -
www.vivotek.com
will become lighted. Operating in either network mode, the green LED will flash every
second as heartbeat to indicate alive. If the red LED is blinking, please check the network
connections.
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet
cable plug in the power adapter. If the LED turns out to be steady blue, go to next
paragraph “Software installation”. If the Ethernet is not available, Network Camera will
switch to wireless LAN mode.
To install in wireless LAN
If the Ethernet is not available while power on, the Network Camera will search for any
access point with the SSID “default”. Once any access point is found, the LED will turn
blue to wait for installation. If the network environment cannot meet the default settings,
install Network Camera in Ethernet to proceed with wireless LAN configuration.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 8
Software Installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant
user access to the camera.
At the end of the hardware installation, the Administrator must place the product
software CD into the CD-ROM drive of the PC running in MS Windows. An auto-run
program will pop up (If the program is not on auto-run, go to the root directory of the
software CD and click on “autorun.exe”).
Click on “Software Utility” item, after the window contains changed, click on “Installation
Wizard” to run Vivotek’s installation program.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
9 - User's Manual
- 10 -
www.vivotek.com
Upon Installation Wizard’s start up, a searching box will pop up. This program searches
for Vivotek’s product on the same LAN:
After searching, Vivotek Video Servers or
Network Cameras will be located by the
Installation Wizard. There may be several
entries shown in the window. The
Administrator may differentiate the
Network Cameras with the serial number.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 10
- 11 -
www.vivotek.com
For the series number in the “Serial Number” field, please check the label on the bottom
of the camera.
The IP addresses shown in the "Current IP Address" field reflect those on the local
network. They may be from the DHCP server. If there is no DHCP server, the camera
will try to find a free IP address (this takes from 15 second to 3 minutes, depending on
the LAN status). The method of finding IP address is seeking from 192.168.0.99, to
192.168.0.254. If any of the address inside this range is free, the Network Camera will be
assigned to this IP address, and its subnet mask would be 255.255.255.0. If none of the
addresses is free, the Network Camera will try the range from 192.168.0.2 to
192.168.0.98. After an IP address is assigned to the camera, the “Activity” status LED
blinks.
The UPnP function will always assign an IP address for the Network Camera. The
Administrator can click on button “Link to selected device” to connect the I.E. to the
camera.
If the camera is not on the IP installer list, click on the “Search” button to search for the
camera on the LAN.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
11 - User's Manual
- 12 -
www.vivotek.com
For more detailed usage of the Installation Wizard, please refer to the user’s manual of
the Installation Wizard included in the product CDROM to find the location of the Network
Camera. There may be many Network Cameras in the local network. Users can
differentiate the Network Cameras with the serial number. The serial number is printed
on the labels on the carton and the back of the Network Camera body. Please refer to the
user’s manual of Installation Wizard for detail.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 12
- 13 -
www.vivotek.com
Initial Access to the Network Camera
Check Network Settings
The Network Camera can be connected either before or immediately after software
installation onto the Local Area Network. The Administrator should complete the
network settings on the configuration page, including the correct subnet mask and IP
address of gateway and DNS. Ask your network administrator or Internet service
provider for the detail information. By default the Network Camera requires the
Administrator to run installation every time it reboots. If the network settings are to
remain unchanged, disable the Install option. Refer to “Network settings” on the
System Configuration page for details. If any setting is entered incorrectly and cannot
proceed to setting up the Network Camera, restore the factory settings following the
steps in the “Troubleshooting” chapter of the Appendix.
Add Password to Prevent Unauthorized Access
The default Administrator’s password is blank and the Network Camera initially will not
ask for any password. The Administrator should immediately implement a new
password as a matter of prudent security practice. Once the Administrator’s password
is saved, the Network Camera will ask for the user’s name and password before each
access. The Administrator can set up a maximum of twenty (20) user accounts. Each
user can access the Network Camera except to perform system configuration. Some
critical functions are exclusive for the Administrator, such as system configuration, user
administration, and software upgrades. The user name for the Administrator is
permanently assigned as “root”. Once the password is changed, the browser will
display an authentication window to ask for the new password. Once the password
is set, there is no provision to recover the Administrator’s password. The
only option is to restore to the original factory default settings.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
13 - User's Manual
- 14 -
www.vivotek.com
How to Use
Authentication
After opening the Web browser and typing in the URL of the Network Camera, a
dialogue window pops up to request a username and password. Upon successful
authentication, the following figure is displayed.
The foreground is the login window and the background shows the message if
authentication fails. The user may check the option box to save the password for future
convenience. This option is not available to the Administrator for obvious reason.
*If the administrator (root user) assigns no password, everybody can access the
homepage directly.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 14
- 15 -
www.vivotek.com
Installing plug-in
For the initial access to the Network Camera in Windows, the web browser may prompt
for permission to install a new plug-in for the Network Camera. Permission request
depends on the Internet security settings of the user’s PC or notebook. If the highest
security level is set, the computer may prohibit any installation and execution attempt.
This plug-in has been registered for certificate and is used to display the video in the
browser. Users may click on
to proceed. If the web browser does not allow the
user to continue to install, check the Internet security option and lower the security
levels or contact your IT or networking supervisor for help.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
15 - User's Manual
- 16 -
www.vivotek.com
Primary user’s capability
Main Screen with Camera View
The main page layout has three parts:
Configuration functions: The camera can be configured using these user interfaces.
Camera View: What the camera sees.
Pan/Tilt control buttons: These buttons provide a command interface to control the
aim of the camera.
Click on the configuration link to the left of the image window to enter the configuration
page.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 16
- 17 -
www.vivotek.com
The Configuration:
“Snapshot” The button provides users a fast way to capture a single image of the
video from the Network Camera.
“Client Settings”
Clicking on this button links you to the client setting pages, please check the following
session for more details.
“Configuration” Only the Administrator can access camera configurations.
The camera view:
The information bar at the top of the camera view shows the connection type to the
Network Camera and the current date/time.
The camera view provides not only the live video, but also a way to aim the Network
Camera to different target. Using mouse to click on the target inside the video will
command the Network Camera to aim at the target.
View capabilities
This feature allows users to open a digital zoom control window to specify the zoom
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
17 - User's Manual
- 18 -
www.vivotek.com
factor for specified area in the camera view. Users can also move the white frame to
select the area of the video that she/he wants to view.
“Disable digital zoom” The checkbox selection allows users to disable/enable the
digital zoom function.
“Zoom Factors” The range of zoom factor is from 100% to 400%, users can select
any integer factor inside this area.
“Hide” Click on this button can close the digital zoom control window.
“Play” The option will connect to the Network Camera. The button is the same one as
“Pause”.
“Pause” The option will pause the video, but the connection remains. The button is the
same one as “Play”.
Play/Pause
Digital Zoom
Play volume
Mute
Stop
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 18
- 19 -
www.vivotek.com
“Stop” The option will disconnect to the Network Camera.
“Play volume” Click on this button can adjust the audio volume.
“Mute” Disable audio at client side.
The pan/tilt control buttons:
The direction buttons are for Left, Right, Up, Down, and Home functions. The Home
button centers the camera.
“Go to” Once the Administrator has determined the preset positions; the User can aim
the camera using this control.
“Pan speed”
This button sets the moving range of the “Left” and “Right” commands.
“Tilt speed”
This button sets the moving range of the “Up” and “Down” commands.
“Pan”
This button commands the camera to pan from the current position to the left-most
and then to the right-most position. After panning, the camera returns to the original
position.
“Patrol”
This button commands the camera to patrol between the preset positions on the Patrol
List, which can be modified on the “Camera control page”. After one patrol cycle, the
camera returns to the original position.
“Stop” This stops the “Auto Pan” command or “Auto Patrol” command.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
19 - User's Manual
Client settings
At the initial access to the “Connection type” page in Windows, the web browser will ask
for a new plug-in installation, the plug-in being the Network Camera. This plug-in has
been registered for certification and can be used to change the parameters at the
client’s site. The user may click on
to install the plug-in. If the web browser
does not allow the user to complete the installation, check the Internet security to
lower the security level or contact your IT or networking supervisor.
There are two settings for the client side. One is “Media Options” for users to
determine the type of media to be streaming. The other is “Protocol Options” which
allows choices on connection protocol between client and server. There are four
protocols choices to optimize your usage – Multicast, UDP, TCP and HTTP.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 20
- 21 -
www.vivotek.com
Using multicast protocol can reduce traffic by simultaneously delivering a single
stream of information to several clients. Please enable multicast options first from
configuration page. And make sure your router support this technology.
The UDP protocol allows for more real-time audio and video streams. However, some
packets may be lost due to network burst traffic and images may be obscured.
The TCP protocol allows for less packet loss and produces a more accurate video
display. The downside with this protocol is that the real-time effect is worse than that
with the UDP protocol.
The HTTP protocol allows the media can be streaming through http port when the UDP
or TCP protocol are blocked.
If no special need is required, UDP protocol is recommended. Generally speaking, the
client’s choice will be in the order of UDP Ш TCP. After the Network Camera is
connected successfully, “Protocol Option” will indicate the selected protocol. The
selected protocol will be recorded in the user's PC and will be used for the next
connection. If the network environment is changed, or the user wants to let the web
browser to detect again, manually select the UDP protocol, save, and return HOME to
re-connect.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
21 - User's Manual
- 22 -
www.vivotek.com
<url> http://<Network Camera>/client.html
<Network Camera> is the domain name or the original IP address of the Network
Camera.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 22
- 23 -
www.vivotek.com
Administrator’s capability
Fine-tuning for Best Performance
Best performance generally equates to the fastest image refresh rate with the best
video quality, and at the lowest network bandwidth as possible. The three factors,
“Maximum frame rate”, “Constant bit rate”, and “Fix quality” on the Audio and Video
Configuration page, are correlative to allow for achieving the best performance
possible.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
23 - User's Manual
- 24 -
www.vivotek.com
For Viewing by Mobile Phone
Most 3GPP cell phone supports media streaming with MPEG4 video and GSM-AMR
audio. Due to the limitation of the bandwidth for 3GPP, only 176x144 size video is
supported for cell phone viewing. Select the “Configure for mobile viewing” option will
change the range of other related video settings.
For Best Real-time Video Images
To achieve good real-time visual effect, the network bandwidth should be large enough
to allow a transmission rate of greater than 20 image frames per second. If the
broadband network is over 1 Mbps, set the “Fix bit rate” to 1000Kbps or 1200Kbps. The
maximum frame rate is 30. If your network bandwidth is more than 512Kbps, you can
fix the bit rate according to your bandwidth and set the maximum frame rate to 30 fps.
If the images vary dramatically in your environment, you may want to slow the
maximum frame rate down to 20 fps in order to lower the rate of data transmission.
This allows for better video quality and the human eyes cannot readily detect the
differences between those of 20, 25, or 30 frames per second. If your network
bandwidth is below 512 Kbps, set the “Fix bit rate” according to your bandwidth and try
to get the best performance by fine-tuning with the “Maximum frame rate”. In a slow
network, greater frame rate results in blur images. Another work-around is to choose
“160x120” in the “Size” option for better images. Video quality performance will vary
somewhat due to the number of users viewing on the network; even when the
parameters have initially been finely tuned. Performance will also suffer due to poor
connectivity because of the network’s burst constraint.
Only Quality Images Will Do
To have the best video quality, you should set “Fix quality” at “Detailed” or “Excellent”
and adjust the “Maximum frame rate” to match your network’s bandwidth. If your
network is slow and you receive “broken” pictures, go to the TCP protocol in
“Connection type” and choose a more appropriate mode of transmission. The images
may suffer a time delay due to a slower connection. The delay will also increase with
added number of users.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 24
- 25 -
www.vivotek.com
Somewhere Between Real-time and Clear Images
If you have a broadband network, set “Fix quality” at ”Normal” or better, rather than
setting “Fix bit rate”. You can also fix the bandwidth according to your actual network
speed and adjust the frame rate. Start from 30 fps down for best results but not below
15 fps. If the image qualities are not improved, select a lower bandwidth setting.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
25 - User's Manual
Loading...