Vivotek AW-IHH-0100 Installtion Instruction

AW-IHH-0100 Industrial Gigabit 95W PoH/PoE Injector

Quick Installation Guide

INTRODUCTION

Model Description

AW-IHH-0100 95W PoH/PoE output

PACKAGE CONTENTS

* 1x PoE injector * 1x DIN rail bracket * 2x wall mount brackets
* 1x Quick Installation Guide * 1x 5-pin terminal block

IMPORTANT:

1. Use CAT5 or 5e UTP/STP cables.

2. Always shut down the power source before connecting power wires.

CONNECTION

AC-to-DC power

LEDs

AW-IHH-0100

PW1PW2

Mode A

Mode B

Non-PoE Switch

P+D OUT

48 ~ 56V DC

-

Data IN

+-+

LED denitions:

PW1 Green ON: power good; OFF: power failed.
PW2 Green ON: power good; OFF: power failed.
Mode A End span PD detected
Mode B Mid span PD detected

Chassis Ground

All specications are subject to change without noice.

Copyright © 2016 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]| E: [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T: 408-773-8686| F: 408-773-8298| E: [e-mail]

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T: [phone] E: [e-mail]