Vivotek AW-GEU-080A-250 Installation Guide

AW-GEU-080A-250 PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-GEU-080A-250 is an 8-port GbE unmanaged PoE switch capable of feeding 15.4/30/60W (per port) power to
Power over Ethernet (PoE) devices. The switch is capable of a total of 240 Watts power budget.

PACKAGE CONTENTS

* 1x PoE switch * 1x Quick Installation Guide
* 1x rack mount kit * 1x power cord (type by the shipped-to area)

IMPORTANT

:

1. Install the PoE switch in a ventilated and dry place, that is free electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 6 UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 250W.

CONNECTION

Front Panel Rear Panel

Speed domes

Uplink

PoE cameras

ON

OFF

100~2 40V

AC

Voltage regulator

LED DEFINITIONS

ACT

Green ON Ethernet port are connected and normal.
Fast blinking Data is being transmitted or received.
Off No connection.

10/100M

Yellow ON Ethernet port speed is 100Mbps.
Off Ethernet port speed is 10Mbps.

1000M

Green ON Ethernet port speed is 1000Mbps.
Off No connection.

PoE

Yellow ON Port is linked to a powered device.
OFF No device is connected.

All specications are subject to change without noice.

Copyright © 2016 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]| E: [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T: 408-773-8686| F: 408-773-8298| E: [e-mail]

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T: [phone] E: [e-mail]