Vivotek AW-GET-180A-250 Installation Guide

AW-GET-180A-250 PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-GET-180A is a 16 port 10/100/1000BaseT unmanaged PoE switch capable of feeding 15.4/30W (56V max. per
port) power to Power over Ethernet (PoE) devices. It comes with an addition of 2 GbE SFP ports. The switch is capable
of a total of 250 Watts power budget.

PACKAGE CONTENTS

* 1x PoE switch * 1x Quick Installation Guide
* 2x rack mount ears * 1x power cord (type by the shipped-to area)

IMPORTANT

:

1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 6 UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 250W.

CONNECTION

Front Panel

Rear Panel

Voltage regulator

LED DEFINITIONS

POWER

ON Power is on and normal.
Off Power is off.

LAN

Green ON Connected in 1000Mbps.
Yellow On Connected in 10/100Mbps.
Off No connection.
Flashing Data is being transmitted or received.

PoE

Yellow ON Port is linked to a powered device.
OFF No device is connected.

All specications are subject to change without noice.

Copyright © 2016 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]|E : [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T : 408-773-8686 |F : 408-773-8298 | E : [e-mail]

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T: [phone] E: [e-mail]