Vivotek AW-GET-123A-240 Installation Guide

AW-GET-123A-240

Outdoor PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-GET-123A-240 is a 8 port 10/100/1000BaseT PoE switch capable of feeding 15.4/30W (54V max. per port)
power to Power over Ethernet (PoE) devices. It comes with another 4x GbE SFP port. The switch is capable of a total of
240 Watts PoE power budget.

PACKAGE CONTENTS

* 1x PoE switch * 1x Quick Installation Guide
* 1x T25 L-wrench, 4x wall anchors

IMPORTANT

:

1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 5e UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 250W.

CONNECTION

LEDs

VAC 100~240 power input

10/100/1000 RJ45
PoE ports

DC input

Reset button

Port LED1 Port LED2

100/1000 SFP ports

LED DEFINITIONS

Power1

Power2

RJ45 ports
LED1

RJ45 ports
LED2

SFP ports

Green ON Power is on and normal.
Green Off The switch is not receiving power.
Green ON Power is on and normal.
Green Off The switch is not receiving power.
Green ON Port is enabled and link established with a device at the 1000Mbps speed.
Grren Blinking Port is transmitting and receiving data at the 1000Mbps speed.
Amber ON Port is enabled and link established with a device at the10/100Mbps speed.
Amber Blinking Port is transmitting and receiving data at the 100Mbps speed.
Off No active network connection. The port may have been disabled through user interface.
Green ON The port is enabled and supplying power to connected device.
Amber ON An abnormal state, such as overload status has occurred.
Off The port has no active network cable connected, or it is not connected a PoE PD device. Otherwise, the port may have

Green ON Port is enabled and link established with a device at the 1000Mbps speed.
Grren Blinking Port is transmitting and receiving data at the 1000Mbps speed.
Amber ON The port is enabled and established a link to connected device, and the connection speed is 100Mbps.
Amber Blinking Port is transmitting and receiving data at the 100Mbps speed.
Off No active network connection. The port may have been disabled through user interface.

been disabled through the switch user interface.

RESET & RESTORE

Reset the switch 2 ~ 7 seconds Blinking Green All LEDs off
Restore to defaults 7 ~ 12 seconds Blinking Green All LEDs ON

INSTALLATION

Use the included M10 hex socket screws to secure the power box to a pole-mount or corner mount bracket.

M10

AM-314
AM-315
AM-414

3/4” conduit

The mounting hole denition is illustrated below. The same mounting hole pattern apply to all pole-mount and corner-

mount brackets.

Outdoor PoE switch:
AW-GEU-083A-240
AW-GET-083A-120
AW-GET-123A-240
AW-GEU-086A-240
AW-GET-086A-120
AW-GET-126A-240

All specications are subject to change without noice.

Copyright © 2017 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]|E : [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T : 408-773-8686 |F : 408-773-8298 | E : [e-mail]

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T: [phone] E: [e-mail]