Vivotek AW-GET-100A-120 Installation Guide

AW-GET-100A-120 PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-GET-100A-120 is an 8 port 10/100/1000BaseT + 2 GbE SFP unmanaged PoE switch capable of feeding

15.4/30W (56V max. per port) power to Power over Ethernet (PoE) devices. The switch is capable of a total of 120 Watts
power budget.

PACKAGE CONTENTS

* 1x PoE switch * 1x Quick Installation Guide
* 2x rack mount ears * 1x power cord (type by the shipped-to area)

IMPORTANT

:

1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 6 UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 120W.

CONNECTION

Rear Panel Front Panel

Voltage regulator

- OR - - OR -

ConsoleNVRRouter / switch

Use SFP, LC type transceiver with GbE transfer speed in Single mode (10km,30km,50km,80km) or Multi mode (0.5m or
2km) or Bidi (10km,30km,50km,80km).

LED DEFINITIONS

POWER

ON Power is on and normal.
Off Power is off.

LAN

Green ON Connected in 1000Mbps.
Yellow On Connected in 10/100Mbps.
Off No connection.
Flashing Data is being transmitted or received.

PoE

Yellow ON Port is linked to a powered device.
OFF No device is connected.

All specications are subject to change without noice.

Copyright © 2016 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]|E : [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T : 408-773-8686 |F : 408-773-8298 | E : [e-mail]

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T: [phone] E: [e-mail]