Vision Fitness T9000, T9100 User Manual
Assembly
Guide
T9100 AND T9000
PLATFORM TREADMILLS
1
STEP
2
STEP
4
STEP
To avoid possible damage to this treadmill, please follow these assembly steps in the correct order. Before proceeding, find your
new treadmill’s serial number located on the front axle tube, and enter here:
Please, refer to this number when calling for service. Enter this serial number on your Warranty Card and in your own records. Be
sure to read your Owner’s Guide before using your new treadmill.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your
treadmill to prevent loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially
threaded in before completely tightening any ONE screw or bolt.
Assembly
Guide
T9100 AND T9000
PLATFORM TREADMILLS
3
STEP
6MMAllen Wrench
Screwdriver
5MML-Shaped Wrench
TOOLS & PARTS INCLUDED
PARTS BOX
Water Bottle, Qty: 1
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
Loading...