Vision Fitness R2200, R2200HRT User Manual

Guide

Assembly

R2200 & R2200HRT

SEMI-RECUMBENT FITNESS CYCLES

To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding though, find your new Fitness Cycle’s serial number, located below the power switch, and enter here:

Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Fitness Cycle.

If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12

NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your Fitness Cycle, to prevent

loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

R2200HRT

semi-recumbent fitness cycles

R2200

STEP

5MMAllen Wrench

15MMPedal Wrench

Screwdriver

5MML-Shaped Wrench

TOOLS & PARTS INCLUDED

4MML-Shaped Wrench

PARTS BOX

Console Mast Cover, Qty: 1

Pedals, Qty: 2

Power Supply, Qty: 1

Water Bottle & Cage, Qty: 1

Heart Rate Chest Strap (R2200HRT only)

Color-coded Hardware Bags

Owner’s Guide

Assembly Guide

Warranty Card

+ 5 hidden pages