Vision Fitness E3000 User Manual
Assembly
Guide
E3100 AND E3000
UPRIGHT FITNESS BIKES
1
STEP
2
STEP
4
STEP
To avoid possible damage to this Fitness Bike, please follow these assembly steps in the correct order. Before proceeding, find your
new Fitness Bike’s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be
sure to read your Owner’s Guide before using your new Fitness Bike.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Fitness Bike to prevent loosen-
ing and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely
tightening any ONE screw.
Assembly
Guide
E3100 AND E3000
UPRIGHT FITNESS BIKES
3
STEP
5mm T-Shaped Wrench
15mm Pedal Wrench
Screwdriver
5mm L-Shaped Wrench
TOOLS & PARTS INCLUDED
PARTS BOX
Water Bottle & Bracket
Power Supply (E3100 ONLY)
Tension Control Knob and bracket
(E3000 ONLY)
Pedals
Seat Post Knob
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
14mm Seat Wrench
Loading...