ViewSonic VSD242 User Guide

VSD242
Smart Display

User Guide

Model No. VS16340

Thank you for choosing ViewSonic

With over 25 years as a world leading provider of visual solutions, ViewSonic
is dedicated to exceeding the world’s expectations for technological evolution,
innovation, and simplicity. At ViewSonic, we believe that our products have the

potential to make a positive impact in the world, and we are condent that the

ViewSonic product you have chosen will serve you well.

Once again, thank you for choosing ViewSonic !

Compliance Information

Please read before proceeding

• Use only the batteries and power adapter provided by the manufacturer. The use of

unauthorized accessories may void your warranty.

• Do not store your device in temperatures higher than 50°C (122°F).

• The operating temperature for this device is from 0°C (32°F) to 35°C (95°F).

CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage
Directive 2014/35/EU.

European Union Regulatory Conformance

The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic elds (0-300 GHz). This equipment meets the following conformance
standards: EN301489-1, EN301489-17, EN55022/24, EN60950-1, EN300328.

We, hereby, declare that this Wi-Fi & Bluetooth radio is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and
Electronic Equipment Directive 2012/19/EU (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted

municipal waste, but use the return and collection systems according to local law.

If the batteries, accumulators and button cells included with this equipment,
display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a

heavy metal content of more than 0.0005% Mercury, or more than 0.002%

Cadmium, or more than 0.004% Lead.

i2

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/
EU of the European Parliament and the Council on restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS2 Directive) and
is deemed to comply with the maximum concentration values issued by the European
Technical Adaptation Committee (TAC) as shown below:

Substance

Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6+) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers

(PBDE)

Certain components of products as stated above are exempted under the Annex III of the
RoHS2 Directives as noted below:

Examples of exempted components are:

1. Mercury in cold cathode uorescent lamps and external electrode uorescent lamps
(CCFL and EEFL) for special purposes not exceeding (per lamp):

(1) Short length (≦500 mm): maximum 3.5 mg per lamp.
(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.
(3) Long length (＞1,500 mm): maximum 13 mg per lamp.

Proposed Maximum
Concentration

0.1% < 0.1%

Actual Concentration

2. Lead in glass of cathode ray tubes.

3. Lead in glass of uorescent tubes not exceeding 0.2% by weight.

4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.

5. Copper alloy containing up to 4% lead by weight.

6. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by

weight or more lead).

7. Electrical and electronic components containing lead in a glass or ceramic other than

dielectric ceramic in capacitors, e.g. piezoelectric devices, or in a glass or ceramic
matrix compound.

Important Safety Instructions

1. DO NOT place objects on top of the device, as objects may scratch the screen.

2. DO NOT expose the device to dirty or dusty environments.

3. DO NOT place the device on an uneven or unstable surface.

4. DO NOT insert any foreign objects into the device.

5. DO NOT expose the device to strong magnetic or electrical eld.

6. DO NOT expose the device to direct sunlight as it can damage the LCD Screen. Keep

it away from heat sources.

7. DO NOT use the device in the rain.

8. Please check with your Local Authority or retailer for proper disposal of electronic

products.

9. The device and the adapter may produce some heat during normal operation or
charging. To prevent discomfort or injury from heat exposure, DO NOT leave the

device on your lap.

10. POWER INPUT RATING: Refer to the rating label on the device and be sure that

the power adapter complies with the rating. Only use accessories specied by the

manufacturer.

11. DO NOT use a pen or any sharp object to tap the screen.

12. Clean the screen with a soft cloth. If needed, dampen the cloth slightly before
cleaning. Never use abrasives or cleaning solutions.

13. Always power off the device to install or remove external devices that do not support

hot-plug.

14. Disconnect the device from an electrical outlet and power off before cleaning the
device.

15. DO NOT disassemble the device. Only a certied service technician should perform
repair.

16. The device has apertures to disperse heat. DO NOT block the device ventilation, the
device may become hot and malfunction as a result.

17. Users have to use the connection to USB interfaces with USB 2.0 version or higher.

18. PLUGGABLE EQUIPMENT: the socket-outlet shall be installed near the equipment

and shall be easily accessible.

iiiii

Copyright Information

Copyright © ViewSonic Corporation, 2016. All rights reserved.
Android, Google, Google Play, the Google Play logo and other marks are trademarks of
Google Inc.
This product has an AndroidTM platform based on Linux, which can be expanded by a
variety of JME-based application SW.

All products used in this device and trademarks mentioned herein are trademarks or
registered trademarks of their respective owners.

Wi-Fi and the Wi-Fi CERTIFIED logo are registered trademarks of the Wireless Fidelity

Alliance.

microSD™ is a trademark of SD Card Association.
Java, JME and all other Java-based marks are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States and other countries.
The actual included applications (apps) may differ from the illustrated screen shots.
VESA
and DDC are trademarks of VESA
ENERGY STAR
(EPA).
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product
meets the ENERGY STAR® guidelines for energy efciency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages resulting

from furnishing this material, or the performance or use of this product.In the interest of

continuing product improvement, ViewSonic Corporation reserves the right to change
product specications without notice. Information in this document may change without

notice.
No part of this document may be copied, reproduced, or transmitted by any means, for

any purpose without prior written permission from ViewSonic Corporation.

®

is a registered trademark of the Video Electronics Standards Association. DPMS

®

.

®

is a registered trademark of the U.S. Environmental Protection Agency

Intellectual Property Right Information

Right to all technologies and products that comprise this device are the property of their

respective owners:

This product has an Android platform based on Linux, which can be expanded by a variety
of Java-Script-based application SW.
Java, JME and all other Java-based marks are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States and other countries.microSD is a trademark
of SD Card Association.

Product Registration

To meet your future needs, and to receive any additional product information as it

becomes available, please register your product on the Internet at: www.viewsonic.com.

For Your Records

Product Name:

Model Number:
Document Number:
Serial Number:
Purchase Date:

Product disposal at end of product life

ViewSonic respects the environment and is committed to working and living green. Thank
you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn

more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

VSD242
ViewSonic Smart Display

VS16340

VSD242_UG_ENG Rev. 1A 02-03-16
_______________________________
_______________________________

viv

Table of Contents

Table of Contents

1 VSD242 Smart Display Features

2 Set Up Your VSD242 Smart Display

2.1 Connection ......................................................................... 2

2.2 Get Your Smart Display Ready for Use .............................. 2

2.3 Power on Your Device ........................................................ 3

2.4 Power Off Your Device ....................................................... 4

3 About Your VSD242 Smart Display

3.1 Touch Screen ..................................................................... 5

3.2 Applications, Widgets and Shortcuts .................................. 6

3.3 Home Screen ..................................................................... 6

3.4 Navigation buttons ............................................................. 8

3.5 Status Bar ........................................................................... 9

3.6 Customizing Your Home Screen ...................................... 10

3.7 Navigating the Applications ...............................................11

3.8 Connecting to HDMI-compliant Devices via HDMI Input .. 14

4 OSD Menu

4.1 Adjustment Bars ............................................................... 15

3.5.1 Managing Status Menu .......................................... 9

3.6.1 Add an Item (Shortcut) ........................................ 10

3.6.2 Move an Item ..................................................... 10

3.6.3 Delete an Item .................................................... 10

3.6.4 Change the Wallpaper ........................................ 10

3.7.1 Apps screen ..........................................................11

3.7.2 Application Shortcuts ........................................... 12

3.7.3 Recent Applications ............................................. 12

3.7.4 Screen Lock Wallpaper ........................................ 13

4.2 Functions items ................................................................ 16

4.3 OSD Notice....................................................................... 17

4.4 OSD and Hot keys setting ................................................ 17

5 Troubleshooting

5.1 Touch Screen Problems ................................................... 18

5.2 Other Problems ................................................................ 18

6 Appendix

Specication ............................................................................. 19

Table of Contents

VSD242 is a Smart Display with 23.6-inch quad-core display running on
Android 5.1 (Lollipop) Comes with 1920x1080p HD resolution, allow you to
work with HDMI, full-sized USB connectivity as well.

1 VSD242 Smart Display Features

This section introduces you to the features of your Smart Display.

NOTE

• The features or applications described in this User’s manual may vary depended on the

device model purchased.

Front View

No. Components Descriptions

1

Front-Panel Camera

Microphone Used for receiving audio or audio input.

2

- Used for taking a front picture just the same as a
self-portrait.

- Used for making video calls with supportive web

applications.

1vi

Table of Contents

No. Components Descriptions

Touch screen - Touch the screen to control the on-screen

3

congurations including menu items,applications,

buttons,keyboard and so on.

Power button Press to power on / lock the smart display.

4

- Press about 0.5 seconds to power on the power.

- Lock the smart display when the display is on.

- Recall the unlock display when the smart display

is locked.

- When the display is on, press this button and

hold for about 3 seconds to shut down the smart

display (under Android mode).

LED indicator - LED in blue when power on.

5

- LED turns into amber when smart display be

locked.

OSD Menu / Exit Press this button to launch the OSD conguration

6

menu and press again to exit.

Arrow Button

7

(Down / Left)
Arrow Button

8

(Up / Right)

Input Signal Switch

9

OSD Menu Select

Use the arrow buttons (Up / Right and Down / Left)
to move through OSD menus. You can highlight a
menu item by pressing the arrow buttons. You can
also use the arrow buttons to adjust the values to
each item of OSD menu.

Press to switch Input signal (Android/HDMI)
Select function in OSD menu.

Back View

VSD242 Smart Display Features

LEFT SIDE RIGHT SIDE

1

2

3

4

5

6

7

8

LEFT SIDE

No. Components Descriptions

RJ45 Connector Connect to a RJ45 cable for network connection.

1

HDMI OUT

2

HDMI IN

3

Headset Jack Connect to earphone or headset.

4

Connect to digital high quality device for video and
audio congurations (e.g. PC Monitor, BD Player
OHP )

1

2

Microphone IN Plug a compatible microphone into the device.

5

SD Card Slot

6

Mini USB Port (OTG)

7

DC in Port Connect to power adaptor.

8

RIGHT SIDE

1

USB type-A x4 (2.0)

2

USB type-B

Input SD card to extend storage capacity.
(Up to 32 GB)

Connect to windows computer for data transferring.
(Need MTP driver)

Used for keyboard, mouse, ash disk (supports
FAT32 format only) or printer connections.

External display mode for USB upstream Webcam
and Touch-screen control functionality.

32 32

Set Up Your VSD242 Smart Display

2 Set Up Your VSD242 Smart Display

2.1 Connection

LAN

HDMI OUT

HDMI IN

Headset

Microphone

SD

USB

Power

Wi-Fi Devices

PC Monitor

Notebook

External
Computer

DVD Player

Earphone

Microphone

SD Card

Phone U Disk

Outlet

2.2 Get Your Smart Display Ready for Use

Insert the SD card

Insert a SD card if desired and / or

1

available on the back of your smart
display.

Printer

USB Storage

Keyboard

Mouse

Computer

USB Type-A

USB Type-A

USB Type-A

USB Type-A

USB Type-B

Connect the Power Cord

Connect the included power cord to

1

the power jack.

Connect the other end of the power cord to a suitable power outlet.

2

Set Up Your VSD242 Smart Display

2.3 Power on Your Device

Press the power button gently to power on your device

Slide the lock icon to unlock the screen

(if the lock screen function with slide is enabled)

After connecting the power cord, you can press the power button about

1

0.5 seconds to power on your device.

Once powered-up, the LED indicator will show solid Blue.

2

The unlock display will appear after a short boot-up period. (If the lock

3

screen function is enabled).

54

Set Up Your VSD242 Smart Display

Touch and slide the lock icon to unlock the screen if necessary.

4

The device is ready for use when the Home screen is displayed.

5

2.4 Power Off Your Device

Press and hold the power button for about 3 seconds.

1

When the power off menu appears, touch OK.

2

About Your VSD242 Smart Display

3 About Your VSD242 Smart Display

3.1 Touch Screen

The main way to control the device is using your nger to touch the sensitive
surface of the screen directly. You can manipulate icons, buttons, menu
items, on-screen keyboard and other items on the touch screen with below

methods:

Methods Descriptions

Touch Simply touch the items with you nger.

- Act on items on the screen including application and settings

icons.

- Type letters and symbols using the on-screen keyboard.

- Press the on-screen buttons.

Touch and
Hold

Drag Touch and hold an item then move the item with your nger until

Swipe or Slide Quickly move your nger across the surface of the screen

Zoom Out Move two ngers close together on the screen to reduce the

Zoom In Move two ngers apart on the screen to enlarge the view of an

NOTE

• You can connect the dots three to zoom the entire display frequency, also with two
fingers to rotate and zoom the display for ex. Google Maps

designed specifically for blind users and gesture mode navigation features.

Touch and hold an item on the screen by touching it without
lifting your nger until an action occurs.

reaching the target position.

- Move an item on the screen.

- Scroll through Home screens, web pages, lists, entries, photo

thumbnails, contacts and so on.

without pausing when you rst touch it.

view of an image or web page.

image or web page.

TM

, as well as voice output

76

About Your VSD242 Smart Display

3.2 Applications, Widgets and Shortcuts

The soft buttons or icons offer a variety of functions and shortcuts. On the
Home screen, it is your starting point to access all the features on your

device. It displays application icons, widgets, shortcuts and so on.

Applications: Software allows you to perform a specic task. Power on your
device, it is preloaded with a variety of applications already. You can also
download additional applications from the Google PlayTM Store.

Widgets: Widgets are applications that you can use directly on the Home
screen. Example: Analog clock, Bookmark, Picture frame, the GoogleTM

search bar and so on.

Shortcuts: A link that you can create on your Home screen to provide
quicker access to applications you have installed.

3.3 Home Screen

Once you power on your device, and unlock your screen, the central Home
screen will display rstly. You can also touch the Home button to go to
Home screen. On the Home screen, it allows you to access all the features

installed in your device.

The Home screen is composed of ve screen panels. You can slide your
nger to left or right across the central Home screen to view more widgets,
shortcuts, and other items located on each screen panel. You can also add

shortcuts, widgets or change the desktop wallpaper on each screen panel.

About Your VSD242 Smart Display

1 2

6

No. Items Descriptions

1

Google Search

3 4 5

Use the Google Search application to search
the web faster and easier from Google.

10

8

9

11

7

2

3

4

5

6

7

8

Navigation
Area

Back Return to the previous screen or option.

Home

Recent

Applications

Screehshot

Apps

Wi-

Flick and drag the screen horizontally until
the desired Home screen is displayed.

This button will indicate you to go back to
central Home screen at any time.

Touch this button to show you a list of

images about the applications you have

accessed recently. You can touch the listed

image to open the applications.

Tap this button to capture an image of your

screen.

Touch the Apps button to launch all of the

applications installed on your device.

The Wi- icon will appear on the upper right

corner of the screen when you enable the

Wi- function.

10

9

3:11

Time Display the current time.

Voice Input

Use voice input as an alternative to text

entry via keyboard.

98

About Your VSD242 Smart Display

No. Items Descriptions

You can add an application shortcut to the

11

Shortcuts

Home screen and move it freely by touching
and holding the specied icon. This icon
allows you to open a shortcut item quickly.

3.4 Navigation buttons

On the bottom of the screen (system bar), you can nd the navigation buttons

described as below:

Buttons Descriptions

- Touch this button to go back to the previous screen or

option.

Back

Home

Recent Apps

Decreased

volume button

- If the on-screen keyboard is displayed, the button

changes to
keyboard.

- Touch this button to go to the central Home screen
when viewing other Home screens.

- Touch this button to go back to the last Home screen

you have viewed when launching any functions on the
device. Or touch this button again to go back to central

Home screen.

A short-cut way for you to open recent application you

have accessed. Select and touch one of the images from
the list to open the application directly.

To adjust the volume (-) setting on the OSD menu.

. Touch it to close the on-screen

Increased

volume button

To adjust the volume (+) setting on the OSD menu.

About Your VSD242 Smart Display

3.5 Status Bar

The upper right corner of the screen displays current time, and specied icon
(status bar).

Items Descriptions

Time Displays the current time.

Specied Icon Show you the enabled icon.

Status Menu

Show you the current state of your device just like Owner,
Brightness, Settings, and WIFI Settings.

3.5.1 Managing Status Menu

You can touch and drag down the Time area

on the status bar to appear the status menu.

• Touch OWNER item to view people saved on your system.

• Touch SETTINGS item to enter Settings menu that allows you to change
the display settings. For more information, please Refer to 6 Customizing

Your VSD242 Smart Display.

• Touch WI-FI item to enter WIRELESS & NETWORKS conguration menu
that allows you to enable/disable and congure Wi-Fi function.

Touch any other area of the screen to close the Status Menu.

1110

About Your VSD242 Smart Display

3.6 Customizing Your Home Screen

3.6.1 Add an Item (Shortcut)

• Touch the Home button to go back the central Home screen.

• Drag on the screen horizontally to select a Home screen where you want

to add the item.

• Touch the Apps button

• On the Apps screen, touch APPS or WIDGETS tab to enter APPS or
WIDGETS conguration screen.

• Select one of APPS or WIDGETS item that you want to add.

• Touch and hold the item to add it onto the selected Home screen.

located on the bottom of your screen.

3.6.2 Move an Item

• On the Home screen, touch and hold the item that you want to move.

• Move the item to the specied position.

• Then release your nger to add the item to the new position.

3.6.3 Delete an Item

• On the Home screen, touch and hold the item that you want to delete such

as a widget or shortcut.

• An “X Remove” will soon be displayed at the top of the Home screen.

• Drag the item over the “X Remove”.

• Then release your nger to delete the item.

3.6.4 Change the Wallpaper

• Long Touch (touch and hold) an empty space on the screen.

• A “Choose wallpaper from” conguration screen will appear.

• Select one of the wallpaper sources by touching the specied icon.
(Wallpaper sources: ES File Explorer, Gallery, Live Wallpapers and
Wallpapers)

• Tap on the desired wallpaper image. You can always exit by tapping

• Once nishing the wallpaper selection, touch “Set wallpaper” to renew the
wallpaper of Home screen.

.

About Your VSD242 Smart Display

• Some wallpaper allows you to change the wallpaper color, ex. Magic

Smoke. If “Settings…” displays during the changing wallpaper. Touch it ,
and on the top of screen will display “Tap to change”, touch the screen to

congure the wallpaper color. Tap the screen to cycle through the different

colors.

• You can touch Back button to go back previous screen without renew any

changed settings.

NOTE

• All Home Screens share the same background. You cannot set different wallpapers to
individual Home Screen panel.

3.7 Navigating the Applications

You can nd applications available on your device in the all Apps menu:

3.7.1 Apps screen

Open the Apps screen
You can access Apps screen from any Home

screen by touching the Apps button

located on the bottom of your screen. The

Apps screen contains all of the applications
installed on the device including those you
have downloaded.

Navigate pages of applications
Flick the Apps screen horizontally and touch an application to launch it.

Close the Apps Screen

Touch the Home button on the system bar to go back the central Home

screen.

1312

About Your VSD242 Smart Display

3.7.2 Application Shortcuts

To quickly launch applications on the Home
screen, you can add shortcuts for frequently­used application to the Home screen.
For more information, please Refer to 3.6

Customizing Your Home Screen.

Use the shortcut to open an application

Touch the Home button on the system bar.

1

If the desired application shortcut displays on the Home screen, touch

2

the shortcut to launch the application.

3.7.3 Recent Applications

Open a recently used application

Touch the Recent Applications

1

button
applications.

to view the recently used

Scroll the list of recently used applications, and touch the desired

2

application thumbnail to launch the application.

Touch the Recent Applications button again to close the list of

3

recently used applications.

About Your VSD242 Smart Display

3.7.4 Screen Lock Wallpaper

You can set the display to turn off automatically after a timeout period of
inactivity, or power it off manually by touching Power button. When you touch
the Power button to wake up the display, the screen lock wallpaper appears

to avoid unintentional touch of the screen. When the screen lock wallpaper
appears, touch and hold the lock icon, drag it to the edge of the larger circle

that surrounds it to unlock the screen. Refer to 2.3 Turn On Your Device.

NOTE

• Set the duration of screen to remain on before entering sleeping mode, touch the Home
button│Apps button│Settings│Display│Sleep.

1514

About Your VSD242 Smart Display

3.8 Connecting to HDMI-compliant Devices via HDMI
Input

HDMI (High-Denition Multimedia Interface) is a compact audio/video
interface for transferring uncompressed digital audio/video data. You can
obtain the best user experience for video playback and gaming via HDMI.
VSD242 is equipped with a HDMI input for connection to an external HDMI­compliant device. You can connect your PC, notebook, Blu-ray player or any
other HDMI-compliant device to VSD242 for high-denition video display.

How to begin

A type A (HDMI) to type A (HDMI) HDMI cable must be available.

1

Connect the Type A connector of the HDMI cable to the desired HDMI

2

compliant device.

Connect the Type A connector of the HDMI cable to the HDMI-IN port

3

located on the back of your VSD242 . Tap the SELECT
switch to HDMI- mode.

For PC or notebook connection, always set the appropriate resolution.

4

VSD242 supports with max. resolution of 1920*1080.

icon to

4 OSD Menu

OSD Menu

C O N T R A S T / B R I G H T N E S S

C O N T R A S T

B R I G H T N E S S 8 0

7 0

Select the Menu/Exit button on side of your VSD242 to launch OSD
conguration screen. The OSD conguration screen can be used to congure
the Contrast/Brightness, Input Select, Audio Adjust, Color Adjust, Information,
Manual Image Adjust, Setup Menu and Memory Recall.

4.1 Adjustment Bars

Contrast/Brightness:
Contrast: Select and drag the slider on the Contrast bar to adjust the

contrast of screen display. Drag the slider to the right, the contrast is larger.
By default, the contrast is set to 70.

Brightness: Select and drag the slider on the Brightness bar to adjust the
brightness of your screen. Drag the slider to the right, the screen is brighter.
By default, the brightness is set to 100.

Audio Adjust:

Select and drag the slider on the Volume bar to adjust the volume. Drag the
slider to the right, the volume is louder. By default, the volume is set to 50.
Here you can also set the volume to Mute or View other sounds.

1716

OSD Menu

4.2 Functions items

Input Select: Select the input source comes from HDMI or Android.

Remember to check the HDMI connection is successful before you select the
or HDMI item.

Color Adjust: Include sRGB, Bluish, Cool, Native, Warm and user color

items.

Information: Select this item to show you the information about your

VSD242 including the Resolution, H.Frequency, V.Frequency, Pixel Clock,

Model Number and Website.

Manual Image Adjust: Include Sharpness, Dynamic Contrast, Aspect Ratio,
Overscan, ECO Mode, ViewMode and Blue Light Filter.

Setup Menu: Include Language Select, Resolution Notice, OSD Position,
OSD Time Out, OSD Background, Power Indicator, and Sleep.

Memory Recall:

Select the Memory Recall function to return the OSD congurations back to
factory settings.

NOTE

• OSD language supports English, Deutsch (German), Francais (French), Italian,

Spanish, Japanese, Simplied Chinese and Traditional Chinese.

• ViewMode provides for “Standard, Game, Movie, Web, Text, and Mono” mode settings

for optimum image quality.

• The Blue Light Filter setting allows for the user adjustable reduction of high energy blue

light for reduced eye strain.

M N U L IA M A G E A D J U S TA

A T O I M A G E A D J U S TU

H V P O S I T I O N/

C N T A S TR / B R I G H T N E S SO

H R I Z O N T A L S I Z EO

F N E T U N EI

I P U S ET L E C TN

S A R P N E S SH

D N A M I C C OY N R A S TT

A D I A DO J U S TU

R S P O N S E TE I EM

A P E C T T I OR AS

C L O A DR J U S TO

D S P L A Y M OI D E

E O M O D EC

I F O A TR M I O NN

V E W M O D EI

M N U A L I M A G E A D J U S TA

B U E L I G H T F I L T EL R

S T U P M E N UE

M M O R Y R E C A L LE

M N U L IA M A G E A D J U S TA

A T O I M A G E A D J U S TU

B U E L I G H T F I L T EL R

C N A S TR / B R I GHT N E S SO

I P U S ET L E C TN

A D I A DO J U S TU

C L O A DR J U S TO

I F O A TR M I O NN

M N U A L I M A G E A D J U S TA

S T U P M E N UE

M M O R Y R E C A L LE

06

OSD Menu

4.3 OSD Notice

idling:

The OSD menu will close and go back to the original processing screen
automatically during your OSD menu is idling that reached to the OSD time

out value.

No signal:

• The HDMI connection is not ready.

• The HDMI connection device and your smart display is not normalization.

4.4 OSD and Hot keys setting

OSD Lock: Press and hold [ ] and the up arrow [▲] for 10 seconds. If any
buttons are pressed the message OSD Locked will display for 3 seconds.

OSD Unlock: Press and hold [

seconds.

Power Button Lock: Press and hold [

seconds. If the power button is pressed the message Power Button Locked
will display for 3 seconds. With or without this setting, after a power failure,

your LCD display’s power will automatically turn ON when power is restored.

Power Button Unlock: Press and hold [

for 10 seconds.

DDC/CI enable/disable: Press [
SSC/CI and DDC/2B (DDC/CI enable/disable) to allow the computer to send
specific Monitor Control Command Set (MCCS) to command the devices, as

well as receive sensor data from the devices, over a bidirectional link.

] and the up arrow [▲] again for 10

] and the down arrow [▼] for 10

] and the down arrow [▼] again

] and [▼] keys at the same time to toggle

1918

Troubleshooting

5 Troubleshooting

5.1 Touch Screen Problems

Problems Causes Solutions

Touch screen does

not respond to hand
gestures or render
them properly.

The touch function
on the VSD242
HDMI Mode does not

work properly when

the USB cable is
connected to the USB
B-type connector

power noise during
device turn on process

Water drop or spot above
the glass surface.

Pc screen resolution

settings of Multiple

Displays incorrectly

set to "duplicate these
displays."

5.2 Other Problems

Problems Solutions

If the LED does not light blue with the device booting-up then:

-

Ensure that the power adaptor is plugged-in to a suitable

power socket

-

No power

Ensure that the DC connector is fully inserted into the correct
socket on the rear of the VSD242 located under the cover

-

Check the power socket with another device (i.e. table lamp)

-

If there is still no power then contact ViewSonic support or

the Reseller from whom the device was purchased

Re-Plug the wire.

Clean and remove the water
drop then re-plug the USB

wire.

Change PC screen resolution

settings from "duplicate
these displays"to "show

desktop only on 2"(VSD242)

No display Check external HDMI device and connections.
Lock-up Restart

App doesn't
function

No network Check WiFi settings, try Ethernet if available.
No audio Check volume level setting.

Check with App author.

VSD242

device.

6 Appendix

Specication

LCD Spec.

Size 60cm (23.6” viewable)

Resolution 1920x1080
Brightness 250 cd/m
Backlight LED
Thickness 47 mm
Touch screen PCT 10 points touch supported

Hardware

2

Appendix

Buttons Power button *1

Control keys *4
Power LED Indicator Blue (on) / Amber (saving)
I/O ports LAN RJ45, supports 10/100/1000 Mbps

HDMI-OUT

HDMI-IN

Headset

Microphone-IN

SD card

Mini USB *1 (OTG) (5Vdc

DC-IN Jack

USB type A *4 (5Vdc

USB type B *1 (KVM) (5Vdc

, 500mA)

, 500mA)

, 500mA)
Camera 5.0 MP AF camera
Mic location Left & Right side of webcam
Card reader SD card

Speakers 2.5 Watt *2

2120

Appendix

Adaptor

Input: 110V~230V

Output: 12V, 4A (48W)

Physical 593mm x365x47(mm) 23.35x14.37x1.85(inches)

5.62Kg (Net)

Weight

8.12Kg (Gross)

SW

OS Android 5.1 (Lollipop)

System

CPU/SoC Rockchip RK3288
Speed 1.8GHz
Cores Quad-core
Graphic Embedded

Memory DDR3 2GB, Speed to 800Mbps
Storage eMMC (NAND), 16GB

WLAN 802.11 b/g/n

Environment

Temperature &
Humidity

Operation: 20%~90% @ 35
Storage: 90% R.H.

o

C Non-condensing

Altitude 0~2,000m

Accessories

Power cord (by region)
Power adaptor *1
Quick Start Guide *1

Customer Support

For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product serial number.

Country/Region Website

Australia/New Zealand www.viewsonic.com.au

Canada www.viewsonic.com

Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/support/call-desk/

Hong Kong www.hk.viewsonic.com T= 852 3102 2900 [e-mail]

India www.in.viewsonic.com T= 1800 419 0959 [e-mail]

Korea ap.viewsonic.com/kr/ T= 080 333 2131 [e-mail]

Latin America
(Argentina)

Latin America (Chile) www.viewsonic.com/la/

Latin America
(Columbia)

Latin America (Mexico) www.viewsonic.com/la/

www.viewsonic.com/la/

www.viewsonic.com/la/

T= Telephone
C = CHAT ONLINE

AUS= 1800 880 818
NZ= 0800 008 822

T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533

C= http://www.viewsonic.com/la/

soporte/servicio-tecnico

C= http://www.viewsonic.com/la/

soporte/servicio-tecnico

C= http://www.viewsonic.com/la/

soporte/servicio-tecnico

C= http://www.viewsonic.com/la/

soporte/servicio-tecnico

Email

[e-mail]

[e-mail]

[e-mail]

[e-mail]

[e-mail]

[e-mail]

Nexus Hightech Solutions, Cincinnati #40 Desp. 1 Col. De los Deportes Mexico D.F. Tel: [phone])6547-6484
Other places please refer to http://www.viewsonic.com/la/soporte/servicio-tecnico#mexico

Latin America (Peru) www.viewsonic.com/la/

Macau www.hk.viewsonic.com T= 853 2870 0303 [e-mail]

Middle East ap.viewsonic.com/me/ Contact your reseller [e-mail]

Puerto Rico & Virgin

Islands

Singapore/Malaysia/
Thailand

South Africa ap.viewsonic.com/za/ Contact your reseller [e-mail]

United States www.viewsonic.com

www.viewsonic.com

www.viewsonic.com.sg T= 65 6461 6044 [e-mail]

C= http://www.viewsonic.com/la/

soporte/servicio-tecnico

T= 1-800-688-6688 (English)
C = http://www.viewsonic.com/la/

soporte/servicio-tecnico

T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530

[e-mail]

[e-mail]
[e-mail]

[e-mail]

21PB

Limited Warranty

ViewSonic® Smart Display

What the warranty covers:

ViewSonic warrants its products to be free from defects in material and workmanship,
under normal use, during the warranty period. If a product proves to be defective in
material or workmanship during the warranty period, ViewSonic will, at its sole option,

repair or replace the product with a like product. Replacement product or parts may
include remanufactured or refurbished parts or components. The replacement unit will be

covered by the balance of the time remaining on the customer’s original limited warranty.

ViewSonic provides no warranty for the third-party software included with the product or

installed by the customer.

How long the warranty is effective:

ViewSonic Smart Display products are warranted for between 1~3 years, depending on

your country of purchase, for all parts including the light source and for all labor from the

date of the rst consumer purchase.
User is responsible for the backup of any data before returning the unit for service.

ViewSonic is not responsible for any data loss.

Who the warranty protects:

This warranty is valid only for the rst consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modied or removed.

2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, re, water, lightning, or other acts of nature,

unauthorized product modication, or failure to follow instructions supplied with

the product.

b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Causes external to the product, such as electric power uctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specications.

e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.

3. Any product exhibiting a condition commonly known as “image burn-in” which results

when a static image is displayed on the product for an extended period of time.

4. Removal, installation, insurance, and set-up service charges.

How to get service:

1. For information about receiving service under warranty, contact ViewSonic Customer
Support (Please refer to the web site and Customer Support pages). You will need to

provide your product’s serial number.

2. To obtain warranty service, you will be required to provide (a) the original dated sales
slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the

serial number of the product.

3. Take or ship the product freight prepaid in the original container to an authorized

ViewSonic service center or ViewSonic.

4. For additional information or the name of the nearest ViewSonic service center,

contact ViewSonic.

Limitation of implied warranties:

There are no warranties, express or implied, which extend beyond the description
contained herein including the implied warranty of merchantability and tness for a

particular purpose.

Exclusion of damages:

ViewSonic’s liability is limited to the cost of repair or replacement of the product.
ViewSonic shall not be liable for:

1. Damage to other property caused by any defects in the product, damages based

upon inconvenience, loss of use of the product, loss of time, loss of prots, loss of

business opportunity, loss of goodwill, interference with business relationships, or
other commercial loss, even if advised of the possibility of such damages.

2. Any other damages, whether incidental, consequential or otherwise.

3. Any claim against the customer by any other party.

4. Repair or attempted repair by anyone not authorized by ViewSonic.

OTA update disclaimer:

ViewSonic Corporation assumes no liability for any errors or omissions in the information

®

displayed. This rmware update is intended for ViewSonic

smart display. ViewSonic

assumes no liability for data loss or any damages caused as a result of any updates

made on any device or damage to or failure of other equipment to which the products
are connected, whether incidental, consequential or otherwise. You agree to take full
responsibility for all les and data and to maintain all appropriate backup of les and data
stored on any device prior to performance of any update. Users shall be responsible

for obtaining the necessary rights to access and use any third party content. ViewSonic
assumes no liability for the performance, availability and use of third party products and

services. Corporate names and trademarks mentioned herein are the property of their
respective companies. Copyright © 2015 ViewSonic Corporation. All rights reserved.

4.3: ViewSonic Smart Display Warranty SD_LW01 Rev. 1A 08-21-12

2322