Velleman VM192IR Datasheet

Velleman N.V.

December 2012

Datasheet

RGB LED controller (IR version)

Component : VM192IR

VM192IR is an infrared remote controlled RGB driver for 12 or 24VDC led strips. It allows you to set a colour manually
or loop trough all colours automatically, with 4 selectable fading speeds. A built-in dimmer allows the user to adjust
the intensity, regardless of the chosen colour or mode.

Features:

Includes one 4 channel Infrared remote ­IR module can be extended up to 1m ­Colour, intensity and mode are retained and will be restored after a power ­failure
Speed determined by jumper setting. ­Can also be used as a single channel led dimmer ­Smooth manual scrolling through red-orange-yellow-green-blue-indigo-violet ­with up/down buttons.
Fix a manually selected colour. -

MODULES

Technical specications:

Power supply: 12..24VDC ­Current: 2.5A/channel max. (30W/12V, 60W/24V max.) ­PWM frequency /resolution: 245Hz, 10-bit ­Intensity levels: 32 ­Colour loop time (R->G->B->R): 50s, 1m40s, 2m30s or 3m20s ­Max. ambient temp: 30°C / 86°F ­Remote range: up to 10m (fresh battery, line of sight, no interference) ­Remote power supply: V23GA or GP23GAC 12V battery (included) ­Dimensions: -

controller: 80x70x23mm / 3.15 x 2.75 x 0.9” •
remote: 88x37x13mm / 3.46x1.45x0.5”•

COM (+)

R

G

B

Option: additional remotes type VM191

Velleman® NV, Legen Heirweg 33 - Gavere (Belgium)
Velleman.eu - Vellemanprojects.com - Velbus.eu

page 1 of 1