Page 1
INDOOR AND OUTDOOR THERMOMETER CLOCK
TA2
FEATURES
• INDOOR, OUTDOOR TEMP. & TIME AT A GLANCE
• SUPERIOR READABILITY IN THE DARK
• PRECISION QUARTZ ACCURACY
• SLIM AND HANDY DESIGN
OPERATION MANUAL
Max-Min Memory
Button
FRONT
Clear Button
BACK
Battery Compartment
Time display
Indoor Temp. Display
Outdoor Temp.
Display
Velcro Tape Affixes to Kitchen Cabinet
Backlight Button
TA2 GB1
Page 2
TO SET TIME
1. Slide switch to CLOCK SET.
2. Press HR or MIN button to desired time.
3. Slide switch to LOCK after time set.
12HR AM/PM OR 24HR INTERNATIONAL TIME DISPLAY
• Simply slide the 12HR/24HR switch to choose your desired format.
TO SELECT °C OR °F READOUT
Slide switch to °C or °F position.
THERMOMETER
Normal display shows indoor and outdoor temp in 1/10 degree.
Clock Indoor Temp Outdoor Temp
MAX-MIN TEMPERATURE MEMORY
To facilitate HOURLY, DAILY, WEEKLY, MONTHLY or ANY SPECIFIC
PERIOD’S in/out max-min memory record, memory can be cleared by pressing
’CLEAR’ button, and new memory can be recorded instantly when the display is
back to normal temp mode.
TA2 GB2
Page 3
TO READ INDOOR MAX-MIN TEMPERATURE
1st press "MAX-MIN MEMORY" Button.
Outdoor MAX Temp Outdoor MIN Temp
Press ’CLEAR’ button to clear indoor MAX-
MIN TEMP memory record.
TO READ OUTDOOR MAX-MIN TEMPERATURE
2nd press "TEMP MAX-MIN, MEMORY" button
Outdoor MAX Temp Outdoor MIN Temp
Press ’CLEAR’ button to clear outdoor MAX-
MIN TEMP memory record.
The third time that the "MAX-MIN MEMORY" button is pressed or if after 8
seconds when no key is pushed, display will resume to normal temp display
mode.
TA2 GB3
Page 4
USING THE BACKLIGHT
You may check the time or temperature any time in the dark by simply pressing
the BACKLIGHT button once. The display will light up with a soft blue glow that
lasts for approximately 3 seconds.
INSERTING THE BATTERIES
Slide the cover of the battery compartment open, and place two AAA batteries,
checking the battery polarities as indicated.
NOTE :
Frequent use of this feature will affect battery life.
TA2 GB4
Loading...