Velleman DVR4USB User Manual [en, de, es, fr]

USER MANUAL

DVR4USB

4-CHANNEL USB DVR
4-KANAALS USB DVR
ENREGISTREUR NUMÉRIQUE 4 CANAUX À CONNEXION USB
VIDEOGRABADORA DE 4 CANALES CON CONEXIÓN USB
4-KANAL-VIDEORECORDER MIT USB-ANSCHLUSS

GEBRUIKERSHANDLEIDING
NOTICE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG

2

DVR4USB VELLEMAN

3

DVR4USB – 4-CHANNEL USB DVR

1. Introduction

To all residents of the European Union
Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.

Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying the DVR4USB! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.

2. General Guidelines

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer

will not accept responsibility for any ensuing defects or problems.

• Be careful during installation. Do not shake the device. Avoid brute force when installing or operating the device.

• The DVR4USB is only USB2.0 compatible.

• Remove the DVR4USB as follows: right click the taskbar → stop the device → gently pull out the USB card.

• Avoid using the DVR4USB simultaneously with other USB devices as this may cause identification problems.

• Contact your dealer if your DVR4USB does not work properly. Do not try to repair the device by yourself.

3. Technical Specifications

Video Format PAL/NTSC
Resolution

PAL 352 x 288
NTSC 320 x 240

Max. Frame Rate per Channel

PAL 25 fps

NTSC 30 fps
Video Channels 4
Audio Channels 1, 8 bits
Data Format MPEG4

4. System Requirements

Screen Resolution 1024 x 768
DirectX DirectX9.0
RAM 256Mb
VGA 32Mb
CPU Intel® PII 800Mhz
USB USB2.0
OS Windows® 2000 / Windows® XP

DVR4USB VELLEMAN

4

5. Hardware Installation

1. Connect your PC with the network first and plug the

device into the USB port if you desire to monitor through
the IE browser.

2. Connect the yellow plug with the video signal from the

camera; connect the white plug to the audio signal from
the camera.

3. Turn on your computer and install the software.

6. Software Installation

After the hardware installation, please turn on your computer. You may be reminded that the computer has found
new hardware. This message can be ignored.

1. Run setup.exe. The installation procedure will initiate. 2. Click NEXT.

3. Select the desired video format and click NEXT.

5. Select the desired option and click NEXT.

7. Click FINISH to complete the installation.

4. A window may pop up reminding users whether to

stop or to continue. Click CONTINUE ANYWAY.

6. Click NEXT.

8. After the installation procedure, please reboot your

computer. A shortcut will be created on the desktop.

The information in this manual is subject to change without prior notice.

DVR4USB VELLEMAN