Velleman C.SCOPE CS-5MXP, CS-5MX Operating Manual

CS-5MXP

Professional metal detector

Operating manual

Gebruike rs handleiding

Manuel de l'Utilisation

CS-5MXP - RAPID GET YOU GOING INSTRUCTIONS

1. Assemble and adjust for length (Twist surplus lead around stem)

2. Insert batteries

3. Set DISC 1 (top right) to ALL METAL (fully anticlockwise).

4. Set DISC 2 (bottom far right) to 5.

5. Set SENSITIVITY (top left) to 3 o'clock position.

6. Push BATT CHECK down and hold to indicate battery condition. Good batteries will be in the
green area on the meter. Release.

7. Set BOOST to NORMAL.

You are now in ALL METAL MOTI ON MODE.

You will find all metals within the search head range including iron and trash PROVIDING THE
SEARCH HEAD IS MOVING OVER THE TARGET (Not stationary).

To ignore these lo w value metals :

8. Adjust DISC 1 (top right) to position 5.

You are now in DISCRIMINATING MOTION MODE.

The other modes requires more detailed explanation acquired from reading the full instructions.

IF A PROBLEM IS ENCOUNTERED REFER TO FULL INSTRUCTIONS

CS-5MXP GB

1

Controls C-Scope CS-5MXP

N

A Battery compartment
B Upper Stem & Handle Grips
C Din plug & Socket
D Stem connecting nut
E Cable
F Lower stem
G Search head fastner
H Power on / off & sensitivity
I Signalmeter
J All metal mode / Discrimination 1
K Boost Hi / Normal
L Pinpoint
M Battery check

Disc 2 Select

O Discrimination 2

CS-5MXP GB

2

INTRODUCTION

B

r

t

The CS-5MXP combines 'turn on and go' technology with real depth to provide you with both
simplicity in use yet sophistication in performance.

IMPORTANT

These family of detectors are recognise d as t he finest detectors availa b l e. They are designed with
lasting quality in mind, high technology , and above all, value for money.
The only way to realise this value is to carefully study and understand this instruction manual. You
will then be able to obtain all of the advantages designed into your detector. It is also strongly
recommended that you experiment with the detector's operations in air, with various test samples, in
order to learn to identify and understand the detector's capabilities and responses.
Always remember that becoming a good metal detective is like becoming a good photogra pher or
fisherman. Although it is an advantage to buy the best equipment having bought it, patience and
hours of practice are needed to become proficient.

ASSEMBLY

Open the carton and remove the main housing assembly. Twist the plastic stem lock, located at the
end of the upper stem to allow the lower stem to be inserted. Adjust for length and rotate the lower
stem to wrap the cable around the stems and take p any slack. Allowing enough cable for free
movement of the search head push the cable into the cable slots to hold it firm. Turn the stem lock
to fix it at the desired position.

BATTERIES

The CS-5MXP is powered by eight AA batteries (not supplied) available from garages, department
stores, etc. or a single 12V rechargeable pack from C-SCOPE. It is advisable to use standard to start
with. You can then evaluate the sort of use you give the detector and decide whether the investment
in rechargeables is justified.

attery

compartment

Charge

socke

Headphone
socket

Battery
compartment

CS-5MXP GB

3