Velleman CS1M User Manual

CS1M

OPERATING INSTRUCTIONS

CS1M VELLEMAN

1

INTRODUCTION

In order to obtain the best results from your new metal locator/detector,
please carefully read this instruction leaflet. The CS1M is an all-purpose
metal locator/detector and will provide you with many hours of pleasure and
treasure hunting.

The CS1M is a motion detector, the search head needs to be moving from left
to right (motion) for the presence of metal to be acknowledged.

DESCRIPTION AND CONTROLS

ON/OFF SENSITIVITY - Switches the detector on and adjusts the

sensitivity to metal.

DISC - Turning this control more clockwise has the

effect of eliminating (DISCriminating)
unwanted signals such as iron and foil.

HEADPHONE SOCKET - Any stereo headphone with a 6.35mm plug

can be used. Use of headphones will mute
the internal speaker.

CS1M VELLEMAN

2

ASSEMBLY

How to assemble your CS1M
The CS1M comes to you dismantled for ease of packing.

To assemble follow these few easy steps :

1. Loosen the lock nut on the upper stem section and insert the lower stem
section with search head.

2. Adjust height and coil the search head lead along the stems to prevent
unwanted signals. Tuck the lead into the grooves on the lower stem
section.

3. Tighten lock nut.

4. Adjust angle of search head, so that the detector balances well, and
tighten as necessary.

Note : All nuts and screws on the detector should only be tightened by hand,
never use any tools as this may cause breakages.

BATTERIES

The CS1M is powered by two PP3 (9V) batteries and we recommend you use
the alkaline long life type.

1. Remove the battery compartment cover by gently squeezing the right
hand edge towards the centre of the cover and pulling outwards.

2. Ensuring that the positive and negative terminals are correctly located,
insert the batteries into the contacts and place batteries into compartment.

3. Replace the cover by inserting the left hand lip into the control box and
pushing the right hand spring side until it clicks into position.

Rechargeable Battery Charging

Rechargeable 9V batteries can be used. Please see your local dealer for
details.