VDO M2 WR User Manual [de]
1
M2 WR
www.vdocyclecomputing.com/service
ENGLISH
Installation video
Operating video
Settings video
2
M2 WR
Preface
Pack contents
Table of contents
Congratulations
In choosing a VDO computer, you have opted for high-quality
device with first rate technology.
To optimally use the computer, we recommend that you read
this manual carefully. It contains full operating instructions
and many useful tips.
We hope you enjoy cycling with your VDO computer.
Cycle Parts GmbH
First, please ensure that the contents of this pack are
complete:
1 VDO computer
1 battery for the computer
1 universal handlebar bracket with cable and sensor
1 spoke magnet (clip magnet)
Cable ties for attaching the bracket and the sensor
1 quick-start instruction manual
Display ............................................................................ 03
Buttons .......................................................................... 03
Functions ....................................................................... 04
Operation while cycling ............................................... 05
Attaching the handlebar bracket and the sensor ...... 06
Inserting the computer into the bracket ................... 07
Function testing ............................................................ 07
Sleep mode ................................................................... 08
Settings ......................................................................... 09
Language ...................................................................... 09
Wheel circumference .................................................... 10
Unit ............................................................................... 13
Clock ............................................................................. 14
Speed indicator settings ................................................ 17
Total distance ................................................................ 18
Total ride time ............................................................... 19
Resetting trip data after the trip ................................ 21
Battery status indicator .............................................. 22
Replacing the battery in the computer ...................... 22
Terms of guarantee ...................................................... 23
Troubleshooting ............................................................ 24
Technical specifications .............................................. 24
3
M2 WR
Display
The VDO M2 WR has a large, easy-to-read display that can be
divided into three areas.
– The top line of the display shows the value for the
selected function.
– The middle line displays “am” or “pm” if the 12-hour
clock format is used. It also displays whether kmh or mph
has been selected for the speed indicator. On the left of this
line are arrows that indicate whether the current speed is
above or below than the average speed.
– The bottom line of the display shows the name of the
selected function in clear text.
Only ONE function at a time appears on the display.
To return to the speed indicator from a selected function,
e.g. ride time, press the SET button.
The SETTINGS can also be used to establish that the speed
indicator is automatically displayed from all other functions
after five seconds.
See page 17: Settings – speed indicator settings
Buttons
The VDO M2 WR has two buttons
SET
In function mode:
– Return to the speed indicator
from any display function
– Open setting mode
(press and hold the button)
In setting mode:
– Open the setting
– Confirm the setting once ready
– Exit setting mode
and return to function mode
TOP
BOTTOM
MIDDLE
BIKE
In function mode:
– Access functions
– Reset trip data to zero
(press and hold the button)
In setting mode:
– Scroll in the setting menu
– Change the data to be set
4
M2 WR
Functions
The VDO M2 WR has the following functions
Current speed
With a wheel circumference of 2,155 mm,
the maximum possible speed is 199 kmh or 124 mph.
Current distance
The current distance counts up to 999.99 km or miles.
If this maximum value is exceeded, the counter restarts the
current distance calculation at zero.
Current ride time
The current ride time counts up to 99:59:59 HH:MM:SS.
If this value is exceeded, the ride time counter restarts at
zero.
Average speed
for the current trip
Maximum speed
for the current trip
5
M2 WR
1x
SET
BIKE
Functions
Current time
(in 24-h or 12-h format)
Total distance
(total for all day trips)
The total distance counts up to 99,999 km or miles.
If this value is exceeded, the total distance counter restarts at
zero.
If the unit is switched from miles to km and the conversion
result is greater than 100,000 km, the counter is reset to
zero.
Total ride time
(total for all day trips)
The total ride time counts up to 9,999:59 HHHH:MM.
If this value is exceeded, the total ride time counter restarts
at zero.
Operation while cycling
While cycling, the display functions can be accessed by
pressing the BIKE button.
Pressing the BIKE button shows the next function on the
display.
Only ONE function at a time is shown on the display.
To once again display the speed, the SET button must be
pressed.
The SETTINGS can also be used to enable the automatic
return to the speed indicator from all function displays.
See page 17: Settings – speed indicator settings
24-H format 12-H format
6
M2 WR
90°
1
2
4
5 7
–
1–5 mm
3
Attaching the bracket and the sensor
Start by attaching the sensor and the magnet.
STEP 1
Place the rubber shim under the sensor. Attach the sensor to
the fork side that corresponds to the side on which you later
want to attach the computer to the handlebars (right or left)
using the cable ties supplied (loosely at first, do not pull tight
just yet).
ATTENTION: the sensor mark on the sensor should point to
the spokes. Depending on the space available, the sensor can
be fitted to the front, inside or back of the fork.
STEP 2
Attach the spoke magnet to an outside spoke. The rod-shaped
magnet core points toward the sensor with the VDO logo.
Align the magnet with the sensor marking on the sensor
at a distance of approx. 1- 5 mm.
STEP 3
Align the sensor and the magnet in their final positions and
fasten them in place: pull the cable ties tight and push the
magnet in firmly.
STEP 4
Move the cable along the fork until it reaches the fork bridge.
From there, wind the cable further along the brake line until it
reaches the handlebars.
STEP 5
Decide whether you want to use handlebar or stem attachment and rotate the base of the handlebar bracket by 90°
accordingly. To do so, undo the screws on the bracket,
remove the foot and rotate it 90° then insert and tighten
the screws again.
ATTENTION: do not overtighten the screws.
STEP 6
Guide the cable ties through the slot in the handlebar bracket,
place around the handlebars or the stem and pull (do not pull
tight just yet).
STEP 7
For handlebar attachment: align the computer angle
to achieve optimum readability.
Now pull the cable ties tight.
Use clippers to snip off protruding cable ends.
A helpful attachment video can be found on our website.
www.vdocyclecomputing.com/service
SENSOR
7
M2 WR
1. LOCK 2. CLICK
2. UNLOCK
UNLOCK
LOCK
Inserting the computer into the bracket
The VDO twist-click system securely connects the computer
to the handlebar bracket.
How to insert the computer:
STEP 1
Place the computer into the bracket in a 10 o’clock position.
STEP 2
Rotate the computer to the right into the 12 o’clock position
and click it into the bracket system. A noticeable resistance
must be overcome to move it into place.
STEP 3
To remove the computer, rotate it to the left (without pushing
or pulling).
Memory aid: Rigid to the Right, Loose to the Left
Function testing
Once the sensor has been attached, check that it functions
correctly.
How to test the computer:
– Insert the computer into the bracket.
– Lift and spin the front wheel.
– A speed should now be displayed on the computer.
If no speed is displayed, there can be several reasons for this.
The possible reasons are described in the “Trouble-
shooting” section.
8
M2 WR
Sleep mode
If you take a break and the M2 is in the bracket,
the computer switches to sleep mode after five minutes.
If you set off again after a break, the VDO M2 has an
auto-start function.
The VDO M2 instantly switches back to the function mode
and the current speed are once again displayed.
9
M2 WR
Settings – language
The following display languages can be selected for the
VDO M2 WR:
– German
– English
– French
– Italian
– Spanish
– Dutch
– Polish
Do this as follows:
Press and hold the SET button until the settings menu
opens.
“Language” appears on the display.
Press SET to open the language setting.
English flashes.
You can now press the BIKE button to select a different
language.
Press the SET button to confirm your language setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WLRreturns to function mode.
10
M2 WR
1x
You can set the roll circumference of your wheel on the
VDO M2 WR.
The more accurate this setting, the more accurate your speed
indicator and the measurement of the distance you have
travelled.
You can find the values for your wheels in the wheel size table
and set these in the device.
If your wheel size is not listed in the table, you can accurately
measure the roll circumference.
This is done as follows:
STEP 1
Stand your bike up and position the front wheel so that the
valve is directly on the ground. Ensure that the tyres are fully
pumped up in accordance with the usage instructions. Mark
the position of the valve on the ground with a line or adhesive
strip.
STEP 2
Now push your bike forwards in a straight line until the valve
is back on the ground after one rotation.
Again mark the position of the valve on the ground with a line
or adhesive strip.
STEP 3
The distance between the two marks corresponds to your
wheel circumference or wheel size in millimetres.
Settings – wheel circumference
Wheel circumference in mm/inches
Tyre size ETRTO
KMH
Wheel
circumference
in mm
MPH
Wheel
circumference
in inches
16 x 1.75 47-305 1,272 50.1
20 x 1.75 47-406 1,590 62.6
24 x 1.75 47-507 1,907 75.1
26 x 1.5 40-559 2,026 79.8
26 x 1.75 47-559 2,070 81.5
26 x 1.9 2,089 82.2
26 x 2.00 50-559 2,114 83.2
26 x 2.10 54-559 2,125 83.6
26 x 2.25 57-559 2,145 84.4
26 x 2.35 60 -559 2,160 85.0
26 x 2.40 62-559 2,170 85.4
28 x 1.5 40-622 2,224 87.6
28 x 1.6 42-622 2,235 88.0
28 x 1.7 5 47-622 2,268 89.3
29 x 2.10 54-622 2,295 90.3
29 x 2.25 57-622 2,288 90.1
29 x 2.40 62-622 2,300 90.5
650 B 2,100 82.6
700 x 18C 18-622 2,102 82 .8
700 x 20C 20-622 2,114 83.2
700 x 23C 23-622 2,095 82.5
700 x 25C 25-622 2,146 84.5
700 x 30C 30-622 2,149 84.6
700 x 32C 32-622 2,174 85.6
700 x 38C 38-622 2,224 87.6
11
M2 WR
How to set your wheel circumference:
Press and hold the SET button until the settings menu
opens.
Settings – wheel circumference
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the wheel
circumference.
Press the SET button to open the setting for the wheel
circumference.
The first two digits flash.
Press the BIKE button to set these digits to the desired
value.
Press the SET button to confirm your setting.
The third digit now flashes and is ready to be set.
Press the BIKE button to set this digit.
12
M2 WR
Press the SET button to confirm your setting.
The final digit on the right now flashes.
Press the BIKE button to set this digit.
Settings – wheel circumference
Press the SET button to confirm your setting.
Your wheel circumference setting is now complete.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
13
M2 WR
Use the unit settings to specify whether the speed should be
displayed in kmh or mph.
Press and hold the SET button until the settings menu
opens.
Settings – unit
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the unit.
Press the SET button to open the unit setting.
“KMH” flashes in the top line of the display.
Press the BIKE button to change the unit to “MPH”.
Press the SET button to confirm the setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
14
M2 WR
In the VDO M2 WR, you can set the clock in 12-hour AM/PM
format or 24-hour format.
Press and hold the SET button until the settings menu
opens.
Settings – clock
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the clock.
Press the SET button to open the setting for the clock.
To switch to the 12-hour AM/PM format,
press the BIKE button.
15
M2 WR
Press the BIKE button to set the hours.
Settings – clock
Press the SET button to confirm the hour setting.
The minutes then flash.
Press the BIKE button to set the minutes.
Press the SET button to confirm the minute setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
Setting the time in 24-hour format
Press theSET button to confirm the selection “24”.
The hours now flash on the display.
16
M2 WR
Press the BIKE button to set the hours.
The display information changes from “pm” to “am”.
Settings – clock
Press the SET button to confirm the hour/AM-PM setting.
The minutes now flash on the display.
Press the BIKE button to set the minutes.
Press the SET button to confirm the minute setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
Setting the time in 12-hour AM/PM format
Press theSET button to confirm the selection “12”.
The hours now flash and “am“ or “pm” appears on the
display.
Loading...