Vantage Point CGUPMPA User Manual

12

15

Model CGUPMPA01 Universal Projector Mount
With Pipe Adaptor Assembly Instructions

NOTE! Hardware has not been supplied for installation from the Pipe Adaptor upward. Installer must provide desired
length of 1-1/2” NPT Pipe and hardware at ceiling attachment point. Preview all steps before beginning. Should any portion of

these instructions be unclear, contact us directly at 800-582-9595 for assistance. Do not attempt to assemble this Vantage Point
Universal Projector Mount, if you have any doubts as to its proper assembly and installation.

weight indicated. Use with heavier than the maximum weight indicated may result in instability causing possible injury. Use of this
product for any other purpose unless specifi ed by Vantage Point Products is not recommended. Think Safety First!

CAUTION - Do not exceed maximum

13

14

16

17

1-1/2” NPT PIPE NOT INCLUDED

A

E

P

Q

B

J

C

H

G

F

J

K

P

J

Q

I

M

O

N

PART

A 3/16” long arm hex key 1
B 5” steel dowel tool 1
C 1-1/2” NPT pipe adaptor 1
D 3/8”-16 x 3/4 socket head set screw 2
E custom button head bolt 1
F 1/2” serrated belleville washer 1
G bronze thrust bearing 1
H projector mount end link 1
I projector mount top rotator 1
J 3/8”-16 x 3/8” socket head set screw 3
K 3/8”-16 x 5/8” socket head set screw 1

D

P

Q

L

L 5/16-18 x 1-1/2” button head cap screw 1
M projector mount attachment arm 4
N projector mount lower cap 1
O projector mount retention bolt (installed at factory) 1
P 4mm x 40mm pan head phillips screw 4
Q projector mount adjustment screw 4

DESCRIPTION

QTY

D

P

Q

All Vantage Point Products Corp. products are manufactured to ensure
superior quality, performance and durability for a lifetime of use . Warranty
covers the product to be free of defects in materials and workmanship
under normal and reasonable use. Vantage Point Products will repair or
replace, at our option, any product which proves to be defective upon our
inspection. This warranty will not apply to products that have been lost or
damaged by misuse, abuse or accident, altered or repaired in any way or
by any person or fi rm other than specifi ed by us, used in violation of in-
structions or incorrect assembly nor used in a manner other than specifi ed
by us. This warranty is nontransferable to a new owner and may require
proof of purchase. All claims must be directly handled with Vantage Point

WARRANTY INFORMATION

Products Corp.

Maximum Projector Weight: 50 lbs

6i82-02/05

Vantage Point Products Corp • P.O. Box 2485 Santa Fe Springs, CA 90670 USA

USA Tel: [phone] • Canada Tel: [phone] • Europe Tel: [phone]

Web Site: www.vanptc.com • Email: [e-mail]

1

1-1/2” NPT PIPE NOT INCLUDED

4

7

9

&2/.4

2

5

&2/.4

3 HOLE

'

&2/.4

10

'

&2/.4

4 HOLE

'

&2/.4

&2/.4

3

6

8

11