IM-EN-FJB-A
User Guide
Fieldbus Junction Box
FJB
Table of contents
1 |
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
|
|
1.1 |
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
2 |
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
2 |
|
|
2.1 |
Wall mounting polycarbonate box (FJB-UN-PCE) . . . . . . . . . . . . . . . . . . . . . . |
2 |
|
2.2 |
Wall mounting steel junction box (FJB-UN-SS) . . . . . . . . . . . . . . . . . . . . . . . . |
2 |
|
2.3 |
Mounting PR-10941 Terminal connection rail . . . . . . . . . . . . . . . . . . . . . . . . |
2 |
3 |
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3 |
|
|
3.1 |
Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
7 |
4 |
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
9 |
|
5 |
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
|
5.1 |
Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
5.2 |
Model code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
5.3 |
Fieldbus junction box dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
11 |
|
5.4 |
Fieldbus junction box specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
14 |
1
1 Introduction
VaisalaK-PATENTS®FieldbusJunctionBoxFJBisdesignedtomakeeasierconnectionsofVaisala
K-PATENTS instrumentations to Fieldbus and Industrial Ethernet through a Fieldbus converter.
TheFieldbusJunctionBoxallowseasyandsafedeviceconnectionstotheModbus/TCP,Modbus
RTU, Ethernet/IP networks, Profinet and Profibus.
Thejunctionboxiseitherinapolycarbonateorastainlesssteelhousing. Thereisalsoapackage for DIN rail mounting (without field housing) for mounting in user’s own control cabinet.
The IP67/Nema 4 protective housings of the fieldbus junction boxes are designed for wall mounting. They also withstand harsh industrial environments and prevent dust, water and moisture reaching the electrical connections.
Note: The converter can only send data. E.g. it is not possible to change the parameters through the converter.
Important: This product shall not be used contrary to these user instructions provided by the manufacturer, or safe use of the product may be compromised.
1.1 Disposal
When wishing to dispose of an instrument or any parts thereof, please observe localandnationalregulationsandrequirementsforthedisposalofelectricaland electronic equipment.
2
2 Mounting
The fieldbus junction box can be mounted either indoors or outdoors. It is mounted on a wall, preferably with easy access. Vaisala recommends that the junction box is protected from rain and dripping water.
2.1 Wall mounting polycarbonate box (FJB-UN-PCE)
P4-036
Figure 2.1 Mounting the polycarbonate junction box (FJB-UN-PCE) on a wall
For the exact placement of the mounting feet, see Figure 5.2.
2.2 Wall mounting steel junction box (FJB-UN-SS)
P4-040
Figure 2.2 Mounting the steel junction box (FJB-UN-SS) on a wall
For the exact placement of the mounting screws, see Figure 5.3.
2.3 Mounting PR-10941 Terminal connection rail
PR-10941 fieldbus converter can be mounted on a DIN rail. For PR-10941 dimensions see
Figure 5.4.