Vaisala DSC111, DST111 Installation Manual
DSC111/DST111 Installation Manual
VAISALA
194 South Taylor Avenue
Louisville, Colorado 80027
Phone: (303)499-1701
Part Number: 00000050
Rev. 1.0
June 14,2010
CHANGE
Initial Release
UNLESS OTHERWISE SPECIFIED, DIMENSIONS
ARE IN INCHES, WITH THE FOLLOWING
TOLERANCES:
0
REV DATE
6/14/2010
REVISIONS
PART / ITEM
None
SCALE:
DS111_CP.dwg
FILE NAME:
TS
DRAWN BY
DWG. NO.
6/14/2010
ISSUE DATE
CP
CP
OF
SHEET
PI214719
NOTICE:
COVER PAGE
THIS DRAWING AND THE INFORMATION IT
DISCLOSES IS THE EXCLUSIVE PROPERTY OF
VAISALA. ANY REPRODUCTION OR USE OF THIS
DRAWING IN WHOLE OR IN PART, WITHOUT THE
EXPRESS CONSENT OF VAISALA IS PROHIBITED.
CHANGE
Initial Release
UNLESS OTHERWISE SPECIFIED, DIMENSIONS
ARE IN INCHES, WITH THE FOLLOWING
TOLERANCES:
0
REV DATE
6/14/2010
REVISIONS
PART / ITEM
None
SCALE:
DS111_CP.dwg
FILE NAME:
TS
DRAWN BY
DWG. NO.
6/14/2010
ISSUE DATE
TC
TC
OF
SHEET
PI214719
NOTICE:
COVER PAGE
TABLE OF CONTENTS
Drawing Title Sheet
DSC111/DST111 Lattice Tower Mounting Detail 1 of 7
RPU Enclosure Drill Guide and Cable Installation 2 of 7
DSC111/DST111 Pole Mounting Detail 3 of 7
DSC111/DST111 Pole Equipment Outline Installation 4 of 7
Remote Pole Equipment Outline Installation 5 of 7
Wiring Instructions for Pole Mount Installation 6 of 7
Targeting Guidlines 7 of 7
THIS DRAWING AND THE INFORMATION IT
DISCLOSES IS THE EXCLUSIVE PROPERTY OF
VAISALA. ANY REPRODUCTION OR USE OF THIS
DRAWING IN WHOLE OR IN PART, WITHOUT THE
EXPRESS CONSENT OF VAISALA IS PROHIBITED.
2"W x 4"L, 3/8-16 U-Bolt, SS
3/8" Lockwasher, SS
C
B
3/8" Nut, SS
A
8
8
4
CHANGE
Initial Release
UNLESS OTHERWISE SPECIFIED, DIMENSIONS
ARE IN INCHES, WITH THE FOLLOWING
TOLERANCES:
0
REV DATE
6/14/2010
REVISIONS
PART / ITEM
None
SCALE:
DS111_pg1.dwg
FILE NAME:
TS
DRAWN BY
DWG. NO.
6/14/2010
ISSUE DATE
1
7
OF
SHEET
PI214719
NOTICE:
DST or DSC111
A
Crossarm, 212564
1.2 Meters(3ft 3in)
B
C
A
B
C
D
D
D
2
Square Plate, 3 1/2" x 3 1/2" x 1/4"
XARMMOUNT KIT
MOUNTING PROCEDURE
1. Position the Crossarm at a height on the
tower to provide a clear and unobsturcted
view of the pavement.
2. Fasten the Crossarm to two legs of the
tower with the XARMMOUNT Hardware Kit.
3. Mount the DST and/or DSC to the
Crossarm. Reference Figures 1, 2, and 3.
Figure 1
Crossarm
Mounting Detail
Figure 2
DST111(ONLY)
Mounted on Tower
Figure 3
DST111 and DSC111
Mounted on Tower
DST111
DSC111
DST111
DSC/DST
Lattice Tower
Mouting Detail
THIS DRAWING AND THE INFORMATION IT
DISCLOSES IS THE EXCLUSIVE PROPERTY OF
VAISALA. ANY REPRODUCTION OR USE OF THIS
DRAWING IN WHOLE OR IN PART, WITHOUT THE
EXPRESS CONSENT OF VAISALA IS PROHIBITED.
Loading...