UVP 76-0053-01 User Manual

Installation Instructions

81-0210-01 Rev B

UVP, Inc. 2066 W. 11th Street
Upland, CA 91786
[phone] / [phone]
Fax: [phone] / E-Mail: [e-mail]

Internet: www.uvp.com

Rocker Tray 76-0053-01

Ultra-Violet Product Ltd., Trinity Hall Farm Estate

Unit 1, Nuffield Rd, Cambridge CB1 1TG UK

[phone] / Fax: [phone]

E-Mail: [e-mail]

Installing the Rocker Tray P/N 76-0053-01

To install the Rocker Tray in the HB-1000 or HL-2000,
remove the metal bottle carousel from the chamber.

1. Place the tray into the chamber with the coupling
arm positioned on the right side.

2. Lift the coupling arm and slide the three pins into the
pin hub located on the right side wall of the chamber.
Note that the pin lengths are different and can be
placed in any position in the pin hub.

3. Slide the tray towards the right so that the pin mount
slides against the hub.

1.

2.

Pin Hub

2.

Pin Mount and Pins

Coupling Arm

3.

Tray Placement Hub Location

Operating the Rocker Tray

After installing the Rocker Tray, to operate the tray
press the Motor Control ON button on the control panel.
Adjust the RPM speed from MIN to MAX as required for
your experiment.

Pin Mount Placement

Control Panel