Universal Enterprise INF200 User Manual

F

ASTER

, E

ASIER

W

AY

T

O

T

AKE

D

IAGNOSTIC

T

EMPERATURE

M

EASUREMENTS

INF200

Infrared T h e r m o m e t e r

Laser targeting

Nine measurement memory

Measures MIN/MAX/∆T/AVG
temperatures

Switchable ˚F or ˚C readings

Temperature 0˚ to +788˚F
(-20˚ to +420˚C)

Distance spot ratio of 8 to 1

Emissivity: adjustable 0.30 to 1.0

Backlight

The INF200 non-contact infrared thermometer
provides a faster, easier way to take diagnostic
temperature measurements. Monitor the
temperature of transformers, circuit breaker panels,
motors and bearings, supply and return registers,
ducts, inlet/outlet steam lines, furnace flues and
many other surfaces. use the INF200 when
diagnosing temperature problems to save time and
reduce the risk of burns and injuries.

The INF200
has the following features:

• Laser targeting

• Nine measurement memory

• Measures MIN/MAX/∆T/AVG temperatures

• Switchable ˚F or ˚C readings

• Temperature range: 0˚ to +788˚F (-20 to +420˚C)

• Distance spot ratio of 8 to 1

• Emissivity: adjustable 0.30 to 1.0

• Built-in barrel sight

• Backlight

• User programmable alarm

• Quick and simple operation

• Protective high-impact case included

• One year limited warranty

Copyright © 2007 UEi Specifications are subject to change without notice. L504 1/07

INF200 • Infrared Thermometer

Specifications

Distributed By:

1-800-547-5740 • Fax: [phone]
www.ueitest.com • Email: [e-mail]

IN CANADA

Vancouver: Phone: [phone] • [phone] • Fax: [phone]
Toronto: Phone: [phone] • Fax: [phone]

IN EUROPE

Phone: [phone] • Fax: [phone]

Te m p e rature ra n g e 0˚ to 788˚F (-20˚ to 420 ˚ C )
A c c u r a cy ±2% of rdg. or ±3˚F (±2˚C) whichever is greater @

73˚ ± 9˚F (23˚ ± 5˚C) ambient operating temperature and

a known blackbody emissivity
R e p e a t a b i l i ty ±1% of rdg or ±2˚F (1˚C) whichever is greater
Response time 500 m sec. (95% response)
S p e c t r al response 7 - 18 microns nominal thermopile detector
M e m o r y 9 measurements / 5 functions each
laser* (class 2 output) Ye s
E m i s s i v i ty . 3 0 - 1.00 digitally adjustable
Te m p e rature display ˚F or ˚C (selectable) 3 digit LC D
Display resolution 1˚F or 1˚C in all modes
Ambient operating ra g e 32˚ to 120˚F (0˚ to 50 ˚ C )
Relative humidity 10 - 95% RH noncondensing @ up to 85˚F (30 ˚ C )
S t o r age tempera t u r e - 13˚ to 158˚F (-25˚ to 70˚C) without battery
Pow e r 9V alkaline battery
B a t t e r y life (alkaline) 50 hours (backlight not used)

16 hours laser used 50%, backlight used 50 % * *
D i m e n s i o n s 5.4” x 1.6” x 7.7” (137 mm x 41 mm x 196 mm)
We i g h t 9.5 oz. (270 gm)
A c c e s s o r i e s Manual and water resistant hard ca s e
Distance spot ra t i o 8 to 1

*Laser is offset 0.5” (1-2 cm) below center of target spot
* * B a t t e ry l ife will vary based on backlight and laser use

PLEASE

RECYCLE