UNITED OFFICE ULG 350 B1 Operating Instructions Manual

IAN 277383
LAMINATOR ULG 350 B1
LAMINATOR
Operating instructions
LAMINIERGERÄT
GB / IE / NI Operating instructions Page 1 DE / AT / CH Bedienungsanleitung Seite 15
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
ULG 350 B1
GB│IE│NI
 1
Index
Introduction ...................................................2
Information for these operating instructions ..................................... 2
Copyright ............................................................... 2
Limited liability ........................................................... 2
Intended use ............................................................ 2
Warning symbols used .................................................... 3
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Basic Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting up and connecting to the power supply .....................5
Items supplied and transport inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Unpacking .............................................................. 5
Disposal of the packaging .................................................. 6
Requirements on the installation site .......................................... 6
Electrical connection ...................................................... 6
Appliance description ...........................................7
Handling and operation .........................................7
Suitable laminating pouches ................................................ 7
Switching levels .......................................................... 7
Preparing for hot lamination ................................................ 8
Preparing for cold lamination ............................................... 9
Lamination process ....................................................... 9
Anti-blocking function .....................................................10
Cleaning .....................................................10
Storage .....................................................11
Disposal .....................................................11
Appendix ....................................................12
Technical data ..........................................................12
Notes on the Declaration of Conformity ...................................... 12
Kompernass Handels GmbH warranty ............................13
Service ................................................................ 14
Importer ...............................................................14
ULG 350 B1
2 │ GB
│IE│
NI
Introduction
Information for these operating instructions
Congratulations on the purchase of your new appliance. You have clearly decided in favour of a quality product. These operating instructions are a component of the Laminator ULG 350 B1 (henceforth designated as the appliance) and they supply you with important information on the intended use, safety, installation and connection as well as operation of the appliance.
These operating instructions must be constantly kept available close to the appli­ance. They are to be read and applied by everyone occupied with operating the appliance and eliminating any malfunctions it may have.
Retain these operating instructions and pass them on, with the appliance, to any future owners.
Copyright
This documentation is copyright protected. All reproductions or duplications, also as extracts, as well as representations
of the illustrations, even in an altered state, are only permitted with the written approval of the manufacturer.
Limited liability
All technical information, data and instructions for installation, connection and operation contained in this operating manual correspond to the latest available at the time of printing and, to the best of our knowledge, take into account our previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these instructions.
The manufacturer assumes no responsibility for damage caused by failure to observe these instructions, improper use, incompetent repairs, making unauthorised modi­fications or for using unapproved replacement parts.
Intended use
This laminator is intended exclusively for use in domestic households, for the hot and cold lamination of documents made from paper or cardboard. This appliance is not intended for commercial or industrial use.
This appliance is not intended for any other use or for uses beyond those men­tioned. Claims of any kind for damage resulting from unintended use will not be accepted. The user alone bears liability.
ULG 350 B1
GB│IE│NI
 3
Warning symbols used
In these operating instructions the following warnings are used:
DANGER
A warning at this risk level indicates a threateningly dangerous situation.
If the dangerous situation is not avoided, it could result in death or serious injury.
Follow the instructions given in this warning to avoid the risk of death or
severe personal injury.
WARNING
A warning at this risk level indicates a possible dangerous situation.
If the dangerous situation is not avoided it could lead to injuries.
Follow the instructions given in this warning to avoid the risk of personal
injuries.
IMPORTANT
A warning at this risk level indicates possible property damage.
If the situation is not avoided it could lead to property damage.
Follow the instructions in this warning to avoid property damage.
NOTICE
A notice indicates additional information that may assist you in the handling
of the appliance.
ULG 350 B1
4 │ GB
│IE│
NI
Safety
In this chapter you receive important safety information regarding the handling of the appliance. This appliance complies with the statutory safety regulations. Incorrect usage can lead to personal injury and property damage.
Basic Safety Instructions
For safe handling of the appliance observe the following safety information:
Before use check the appliance for visible external damage.
Do not put into operation an appliance that is damaged. There will be a risk of a fatal electrical shock.
Repairs should only be carried out by authorised specialist
companies or by the Customer Services department. Incorrect repairs can result in significant risks for the user. In addition, warranty claims become void.
To avoid risks, arrange for a defective power cable to be re-
placed by qualified technicians or by our Customer Service Department.
NEVER use the appliance with a defective power cable.
There will be a risk of a fatal electrical shock.
Do not use extension cables or power socket strips that do
not meet the required safety standards.
The mains power socket must be easily accessible, so that
the power cable can be easily and quickly disconnected in the event of an emergency.
Do not use an external timing switch or a separate remote
control system to operate the appliance.
This appliance may be used by children aged 8 over and by
persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use of the appliance safely and are aware of the potential risks. Children must not play with the appliance. Cleaning and user maintenance tasks must not be carried out by children unless they are supervised.
ULG 350 B1
GB│IE│NI
 5
Never perform hot lamination on flammable, heat-sensitive
and/or meltable materials and do not laminate drawings on temperature-sensitive paper or material that will undergo changes in colour or quality when subjected to heat.
Never laminate valuable or unique documents. Although the
appliance complies with all current safety norms/standards, malfunctions can never be completely ruled out. Malfunctions with the laminator can result in damage to the document being laminated.
Setting up and connecting to the power supply
Items supplied and transport inspection
The appliance is delivered with the following components as standard:
Laminator ULG 350 B1 10 x Laminating pouches DIN A4 for hot laminating (80 micron) 10 x Laminating pouches DIN A5 for hot laminating (80 micron) 10 x Laminating pouches for hot lamination of business cards (80 micron) This operating manual
NOTICE
Check the contents to make sure everything is present and for signs of visible
damage.
If the contents are not complete or are damaged due to defective packaging
or through transportation, contact the Service Hotline (see chapter Service).
Unpacking
Extract the appliance, the laminating pouches and the operating instructions
from the carton.
Remove all packing material.
DANGER
Packaging material should not be used as a play thing by children. There is
a risk of suffocation!
ULG 350 B1
6 │ GB
│IE│
NI
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and reduces the amount of waste generated. Dispose of packaging material that is no longer needed as per the regionally established regulations.
NOTICE
If possible preserve the appliance's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the appli­ance ideally for its return
.
Requirements on the installation site
For safe and flawless operation of the appliance, the installation site must comply with the following requirements:
When setting it up, place the appliance on a firm, flat and horizontal surface.
Set up the appliance so that there is at least 30 cm of free space in front of
the laminator. Otherwise, the pouch will not be ejected completely from the laminator after lamination.
Do not operate the appliance in a hot, wet or very humid environment or
close to combustible material.
The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
Electrical connection
IMPORTANT
Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network. This data must match in order to avoid any damage to the appliance.
Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
Ensure that the power cable is not taut or kinked. Do not let the power cable hang over edges (trip wire effect).
Insert the plug into a mains power socket.
ULG 350 B1
GB│IE│NI
 7
Appliance description
Pouch slot for manual pouch insertion
2
Power indicator light (appliance switched on)
3
Ready indicator light (ready for use)
4
Anti-blocking switch and pouch thickness switch
5
On/Off switch (ON/OFF)
6
Selector switch for hot and cold lamination (HOT/COLD) Pouch ejector slot
Handling and operation
In this chapter you will receive important information about the handling and operation of the appliance.
Suitable laminating pouches
For hot lamination you can use pouches with a width of up to 230 mm and a maximum thickness of 125 micron. For cold lamination you can use pouches with a maximum thickness of 200 microns. Please note that each laminating pouch may only be used once.
NOTICE
For hot lamination, use only laminating pouches that are expressly
intended for hot lamination.
For cold lamination, use only laminating pouches that are expressly
intended for cold lamination.
Take note that the laminating pouches supplied with the laminator are
intended exclusively for hot lamination.
Switching levels
Selector switch position
6
Pouch thickness
switch position
4
Laminating pouch
thickness
Hot 80 > 60 - 80
Hot 125 85 - 125
Cold 125 to 200
NOTICE
For high-gloss photos, you should select the switch position “125” as well
as the appropriate pouch thickness.
Loading...
+ 22 hidden pages