3B
Thermal Binding Machine
KH 4419
Thermal Binding Machine
Operating instructions
KOMPERNASS GMBH
BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH4419-01/10-V2
Συσκευή θερμικής βιβλιοδεσίας
Οδηγίες χρήσης
Content Page
Intended Use 2
Items supplied 2
Technical Data 2
Safety instructions 2
Description of the appliance 3
Operation 3
Cleaning and care 4
Disposal 5
Warranty & Service 5
Importer 6
Read the operating instructions carefully before using the appliance for the first time and preserve this
booklet for later reference. Pass the manual on to whomsoever might acquire the appliance at a later date.
- 1 -
THERMAL BINDING
MACHINE KH 4419
Intended Use
This thermal binder is intended exclusively for use in
the thermal binding of brochures in domestic households.
It is NOT intended for use with any other materials.
It is also NOT intended for commercial or industrial
applications.
The warranty does not provide compensation for
damage caused by improper use of the appliance!
Items supplied
Thermal Binder KH 4419
4x Thermal binder covers, 2mm,
for 20 sheets of 80g/m
3x Thermal binder covers, 3mm,
for 30 sheets of 80g/m
3x Thermal binder covers, 6mm,
for 60 sheets of 80g/m
Operating instructions
Order card
Technical Data
2
2
2
Safety instructions
Injury hazard
• This appliance is not intended for use by individuals
(including children) with restricted physical, physiological or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• Children should be supervised to ensure that they
do not play with the appliance.
• Unplug the power cable after every use and before cleaning, so as to prevent the appliance from
switching itself on inadvertently.
• Check the appliance and all parts for visible damages. The safety concept can work only if the
appliance is in a faultless condition.
• Ensure that the appliance stands at a safe and
secure positioning.
• Do not operate the appliance if it has sustained a
fall or is damaged. Arrange for the appliance to be
checked and, if necessary, repaired by qualified
technicians.
Attention! Hot surfaces. The heating plate at
the bottom of the binding shaft 1 1 becomes
very hot. Touching these may cause serious
burns.
Mains voltage: 220 - 240 V~50 Hz
Nominal power: 250 W
Rated current : 1,2 A
Warm-up time: approx. 3 minutes
Protection class: II /
Binding capacity:
max. 300 sheets (80g/m
thermal binder cover
max. sheet size - DIN A4
2
) with a 30mm
• Do not use an extension cable. Place the appliance
where the power wall socket is easily accessible,
so that in the event of an emergency the plug can
be quickly withdrawn.
NEVER insert your hands into the binding
shaft. There is a risk of being burnt!
- 2 -
Risk of electric shocks.
• Connect the appliance to a mains power socket
supplying a voltage of 220 - 240 V ~/50 Hz.
• Do not operate the appliance if the power cable
or power plug is damaged.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
• NEVER immerse the appliance in water.
Just wipe it with a damp cloth.
• Do not expose the appliance to rain and never
use it in a humid or wet environment.
• Ensure that the power cable never becomes wet
during operation.
• Unplug the appliance immediately after use. The
appliance is free of electricity only when you
remove the power plug from the power socket.
• Do not open the casing or attempt to repair the
appliance yourself. Should you do so, appliance
safety can no longer be assured and the warranty
will become void.
Risk of fire!
• Do not use the appliance in the vicinity of hot surfaces.
• Do not place the appliance in locations exposed
to direct sunlight as this could lead to overheating
and cause irreparable damage.
• Do not leave the appliance unattended when in
use do not use an external timing switch or a separate remote control system to operate the appliance.
Caution - property damage!
• Never attempt to bind flammable, heat-sensitive
and/or meltable materials and do not bind drawings
made on temperature-sensitive paper or material
that could undergo changes in colour or quality
when subjected to heat.
• Fundamentally, never bind valuable or unique
documents. Although this thermal binder satisfies
all relevant safety norms and standards, functional
errors can never be completely discounted - as
with all electrical appliances. Functional errors
with the appliance could cause damage to the
documents being bound.
Description of the appliance
1 Binder shaft
2 Document holder
3 Power cable
4 ON / OFF switch
5 START button
6Control lamp
7 Control lamp
Operation
Note:
On this first use the development of a light odour
may occur, caused by production residues (a slight
smoke development is also possible). This is normal
and dissipates after a short time. Provide for sufficient
ventilation. Open a window, for example.
1. Ensure the appliance has a stable positioning.
2. Pull the document holder 2 out.
- 3 -