Interface software User Manual
System Prerequisites
Recommended configuration
Pentium® 4 or higher with support of all customary
Processor
operating systems
Operating system
Microsoft Windows® 2000 / XP / Vista / Win7
Memory
Monitor
Drive
Input device
Interface
512 MB RAM or higher
VGA (1024 x 768)
CD-ROM
Mouse or compatible
USB or COM for data transmission
Install Software
• Insert the provided CD disk into CD-ROM drive.
• Double-click “XXX_VX.XX.exe” (X can be 0 to 9 or blank, indicating the software version)
• The pop-up windows will guide you through the program setup process.
1/4
Interface software User Manual
Main Screen
Main display screen of measurement
Secondary display screen for measurement
Blinking indicates meter is connected to the software
Data Comparison
Measurement data in graph
Using Program
Click “USB Connection” or “COM Connection”
and is blinking indicates meter is successfully connected to the PC and meter will automatocally start taking
measurements. Primary display screen shows measurement,secondary display screen shows all measurement data.
Exit and close the program
2/4
Interface software User Manual
Print data
Save data (*.txt, *.xls, *.xml)
Open files (*.txt, *.xls, *.xml)
Deleting current data and create a new data.
Repeat: Tick to display every measurement with the interval you set. Un-tick “Repeat”, the secondary display screen will only show measurement result that is different from
the last measured temperature. The graph display will show complete measurement result in graphics despite “Repeat” is ticked or un-ticked.
Sampling Interval allows you to set the sampling intervals of measurement ( 1 to 9999 seconds).
Note: when measurement data reaching to 10000 sets (measurement No.), a warning message will pop up and stop measurements. Save or clear the measurement data before
continuing next measurements.
3/4
Interface software User Manual
Zoom graphic
Save graph in current page as *.bmp
Deleting current data and create a new data.
Last page
Next page
Current page
Previous page
First page
Set numbers of measurement data on graph display
Fill or curve
4/4
Loading...