Tunturi Ergometer T4, T6 Owner's Manual

:: 1

T-GENERATION

ERGOMETER T4 & T6

Owner's Manual :: 2-12

GB

Mode d'emploi :: 13-23

F

Manual del usario :: 24-34

E

Gebruikers gids :: 35-45

NL

583 1013 D

© TUNTURI 2002

2 ::

IMPORTANT SAFETY INSTRUCTIONS

Read this guide through carefully before assembling, using or
servicing your fitness equipment. Please keep the guide somewhere
safe; it will provide you now and in the future with the information
you need to use and maintain your equipment. Always follow these
instructions with care.

:: Before you start any training, consult a physician to check

your state of health.

:: If you experience nausea, dizziness or other abnormal

symptoms while exercising, stop your workout at once and
consult a physician.

:: The device is not to be used outdoors.
:: Place the equipment on a firm, level surface.
:: Place the equipment on a protective base.

:: The device can be used at home and for rehabilitation.
:: Make sure the equipment is unplugged before carrying out

any assembly or maintenance procedures.

:: Before you start using the equipment, make sure it functions

correctly in every way. Do not use faulty equipment.

:: Do not attempt any servicing or adjustments other than those

described in this guide. Everything else must be left to
someone familiar with the maintenance of electro­mechanical devices and authorised under the laws of the
country in question to carry out maintenance and repair
work.

:: This product must be grounded. If it should malfunction or

breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This
product is equipped with a cord having an equipment­grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and
ordinances.

DANGER: Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product ­if it will not fit the outlet, have a proper outlet installed by a qualified
electrician.

:: 3

DEAR TUNTURI OWNER

Welcome to the world of Tunturi exercising.

Your choice shows that you really want to invest in your well-being and
condition; it also shows you really value high quality and style. In
Tunturi Fitness Equipment, you’ve chosen a high-quality, safe and
motivational training partner. Whatever your training goal, we are
certain this is the equipment to get you there.

ASSEMBLY ::

The figures referred to in the text are in the back fold.

Start by unpacking the equipment and check that you have the following
parts (FIGURE 1):

:: Frame
:: Rear support
:: Handlebar support tube
:: Pedals (2)
:: Assembly hardware kit

If necessary, please contact your dealer with the model, equipment serial
no. and spare part no. of the missing part. You’ll find a spare part list at
the back of this guide.

The packaging includes a silicate bag for absorbing moisture during
storage and transportation. Please dispose of the bag once you have
unpacked the equipment.

The directions left, right, front and back are defined as seen from the
exercising position. Assemble your fitness equipment as follows:

REAR SUPPORT (FIGURES 2A AND 2B)

1. Place the support under the rear part of the frame.

2. Fasten it with two hex screws and washers.

3. Lean the device on one side and fasten the rear support from
beneath with two more hex screws and washers.

4. Place the decorative plugs over the two hex screws.

4 ::

HANDLEBAR SUPPORT TUBE :: T4 (FIGURES 3A AND 4)

NOTE! The fastening screws are ready-mounted, so please do not loosen
them.

1. Detach the wire taped to the frame tube and connect it to the wire
from the handlebar support tube.

2. Lead the connected wires carefully inside the frame cover.

3. Push the handlebar support tube into place inside the frame, so
that the holes for the fastening screws are at the front of the tube.
Be careful not to damage the meter wire!

4. Use the enclosed Allen key to tighten both fastening screws
through the holes in the tube.

NOTE! Tighten the fastening screws by turning them counter­clockwise. And not too tight!

HANDLEBAR SUPPORT TUBE :: T6 (FIGURES 3B AND 4)

NOTE! The fastening screws are ready-mounted, so please do not loosen
them.

1. Expose the wire coming from the frame tube by unwrapping the
orange tape that covers it, and then connect it to the wire from the
handlebar support tube.

2. Thread the wire carefully inside the frame tube.

3. Push the handlebar support tube into place inside the frame tube,
so that the fastening screws are on the right side of the tube. Be
careful not to damage the meter wire!

4. Use the enclosed Allen key to tighten both fastening screws
through the holes in the tube.

5. Finally, place the decorative plastic cover over the joint.

NOTE! Tighten the fastening screws by turning them counter-clockwise.
And not

too tight!

PEDALS (FIGURE 5)

The pedals are distinguished by the markings L (left) and R (right) on
their shaft. Fasten the left pedal to the left pedal-crank by turning it
counter-clockwise, and the right pedal to the right pedal-crank by
turning it clockwise.

:: 5

Fasten the pedal straps so that the Tunturi logo faces outward. Select
strap tightness, set the appropriate strap hole on the retainer from below
and pull forcibly upward. Especially when the equipment is new, the
strap fastening may seem relatively tight.

T.I.E. INTERFACE

Push the T.I.E. interface module carefully into place at the top of the
handlebar support tube. The loose screws hanging from the metal
fastening plate on the bottom of the T.I.E. module must enter the holes
at the top end of the handlebar. Make sure that the module is correctly
in place and tighten the fastening screws. (Please see the illustrations in
the T.I.E. manual.)

Read the T.I.E. manual carefully before you start to exercise.

POWER CORD (FIGURE 6)

Before connecting the device to a power source, make sure that local
voltage matches that indicated on the type plate: the T4/T6 operates at
either 230 V or 115 V (North American version). Plug the socket end of
the power cord into the connector, just above the rear support in the
centre of the frame, and the other end into the wall socket. Turn on the
power from the switch above the connector.

NOTE!

:: The device must be connected to a grounded wall socket. Do not

use extension wires when connecting the device to the power
source.

:: Make sure the power cord does not run underneath the device.
:: DANGER: Always switch off the power and uplug this appliance

from the electrical outlet immediately after using.

:: WARNING: To reduce the risk of burns, fire, electric shock, or

injury to persons:

1) An appliance should never be left unattended when plugged in.
Unplug from outlet when not in use, and before carrying out any
maintenance or repair procedures.

2) Do not operate under blanket or other combustive material.
Excessive heating can occur and cause fire, electric shock, or
injury to persons.