Troybilt TB20CS Owner’s Manual

v®

m

al

Trimmer

iMPORTANT: READ SAFETY RULES AND iNSTRUCTiONS CAREFULLY

PiN 769-01467 (10/04)

PRINTED IN USA

@

THANK YOU

Thank you for buying this quaHity product. This modern
outdoor power tooH wiHHprovide many hours of usefuH

service. You wiHHfind it to be a great Habor-saving device.
This operator's manuaH provides you with easy-to-

understand operating instructions. Read the whoHe
manuaH and foHHowaHHthe instructions to keep your new

outdoor power tooHin top operating condition.

PRODUCT REFERENCES, mLLUSTRATmONS
AND SPECmFmCATmONS

AHHinformation, iHHustrations, and specifications in this
manuaH are based on the Hatest product information

avaiHabHeat the time of printing. We reserve the right to
make changes at any time without notice.

Copyright#_ 2004 MTD SOUTHWEST INC, All Rights
Reserved.

TABLE OF CONTENTS

Service Information ......................... 2

Rules for Safe Operation ..................... 3

Know Your Unit ............................ 6

Assembly Instructions ....................... 7

Oil and Fuel Information ...................... 8

Starting/Stopping Instructions ................. 9

Operating Instructions ...................... 10

Maintenance and Repair Instructions ........... 12

Cleaning and Storage ....................... 16

Troubleshooting Chart ...................... 17

Specifications ............................. 18

SERVICE iNFORMATiON
Service on this unit both within and after the warranty

period should be performed only by an authorized and
approved service dealer.

For service call 1-800-520-5520 to obtain a list of
authorized service dealers near you. For more details

about your unit, visit our website at www.troybilt.com.
DO NOT RETURN THE UNIT TO THE RETAILER.

PROOF OF PURCHASE WILL BE REQUIRED FOR
WARRANTY SERVICE.

Before beginning, locate the unit's model plate. It lists
the model and serial numbers of your unit. Refer to the

sample plate below and copy the information for future
reference.

Serial Nnmber

"-_ \ ParentPartNumbec

Medel Number

_Or)EL : /

S/N : ITEM : ,_

Warranty Information ....................... 20

Parts List .................... inside Back Cover

SPARK ARRESTOR NOTE

NOTE: For users on U.S. Forest Land and in the
states of California, Maine, Oregon and Washington.

All U.S. Forest Land and the state of California (Public
Resources Codes 4442 and 4443), Oregon and

Washington require, by Haw that certain internal
combustion engines operated on forest brush and/or

grass-covered areas be equipped with a spark arrestor,
maintained in effective working order, or the engine be

constructed, equipped and maintained for the prevention
of fire. Check with your state or local authorities for

regulations pertaining to these requirements. Failure to
follow these requirements could subject you to liability or

a fine. This unit is factory equipped with a spark
arrestor, if it requires replacement, ask your LOCAL
SERVICE DEALER to install the Accessory Part

#753-04689 Spark Arrestor Kit.

Copy the model and parent

part number here:

Copy the serial number

here:

Make sure you carefully read and understand this manual
before starting or operating this equipment.

THIS PRODUCT IS COVERED BY ONE OR MORE U.S.
PATENTS. OTHER PATENTS PENDING.

CALiFORNiA PROPOSiTiON 65 WARNING

THE ENGmNE EXHAUST FROM THINS

PRODUCT CONTAmNS CHEMICALS

KNOWN TO THE STATE OF CAUFORNmA

TO CAUSE CANCER, BmRTH DEFECTS

OR OTHER REPRODUCTmVE HARM.

The purpose of safety symbols is to attract your
attention to possible dangers, The safety symbols,
and their explanations, deserve your careful attention
and understanding. The safety warnings do not by
themselves eliminate any danger, The instructions or
warnings they give are not substitutes for proper
accident prevention measures,

SYMBOL MEANING

SYMBOL MEANING

DANGER: Failure to obey a

result in serious injury to yourself or to
others. Always follow the safety precautions

to reduce the risk of fire, electric shock and

personal injury,

safety warning will

SAFETY ALERT: indicates

warning or caution. Attention is required in
order to avoid serious personal injury. May
be used in conjunction with other symbols

or pbtographs.

NOTE: Advises you of information or instructions vital to

the operation or maintenance of the equipment.

Read the Operator's Manual(s) and follow all

warnings and safety instructions.

Failure to do so can result in serious injury to the

operator and/or bystanders.

danger,

FOR QUESTIONS, CALL 1o800o520o5520

,, iMPORTANT SAFETY INSTRUCTIONS o

READ ALL iNSTRUCTiONS

BEFORE OPERATmNG

WARNING: When using the unit,

safety rules, Please read these instructions

the unit in order to ensure

operator and any bystanders,

Please keep these instructions for later use,

• Read the instructions carefully, Be familiar with the
controls and proper use of the unit.

Do not operate this unit when tired, ill, or under the
influence of alcohol, drugs, or medication,

• Children and teens under the age of 15 must not use
the unit, except for teens guided by an adult,

All guards and safety attachments must be installed
properly before operating the unit,

• Inspect the unit before use, Replace damaged parts,
Check for fuel leaks, Make sure all fasteners are in

place and secure, Replace parts that are cracked,
chipped, or damaged in any way. Do not operate the

unit with loose or damaged parts,

• Carefully inspect the area before starting the unit,
Remove all debris and hard or sharp objects such as

glass, wire, etc,

you must follow the

WARNmNG: Fa,ureto obey a

resultininjurytoyourselfand others,

Always followthesafetyprecautionsto

reduce the riskoffire,electricshock and

personal injury,

result in property damage or personal injury

to yourself or to others, Always follow the

safety precautions to reduce the risk of fire,
electric shock and personal injury,

Be aware of the risk of injury to the head, hands and

feet,
Clear the area of children, bystanders, and pets, At a

minimum, keep all children, bystanders, and pets
outside a 50 feet (15 m.) radius; there still may be a
risk to bystanders from thrown objects, Bystanders
should be encouraged to wear eye protection, If you
are approached, stop the unit immediately,

Use only 0.080 inch (2.03 mm) diameter original

equipment manufacturer replacement line, Never use
metal-reinforced line, wire or rope, These can break

off and become dangerous projectiles,
Squeeze the throttle control and check that it returns

automatically to the idle position, Make all adjustments
or repairs before using unit.

safetywarning can

, Failure to obey a

• safety warning may

SAFETY WARNINGS FOR GAS UNITS

WARNING: Gasoiineishighiy

vapors can explode if ignited, Take the
following precautions:

• Store fuel only in containers specifically designed and
approved for the storage of such materials.

• Avoid creating a source of ignition for spilled fuel. Do
not start the engine until fuel vapors dissipate.

flammable, and its

• Alwaysstoptheengineandallowittocoolbeforefilling
thefueltank.Neverremovethecapofthefueltank,or
addfuei,whentheengineishot.Neveroperatetheunit
withoutthefuelcapsecurelyinplace.Loosenthefuel
tankcapslowlytorelieveanypressureinthetank.

• Mixandaddfuelinaclean,well-ventilatedoutdoorarea
wheretherearenosparksorflames.Slowlyremovethe

fuelcaponlyafterstoppingengine.Donotsmokewhile
fuelingormixingfuel.Wipeupanyspilledfuelfromthe
unitimmediately.Alwayswipeunitdrybeforeusing.

Movetheunitatbast30feet(9.1m)fromthefueling
sourceandsitebeforestartingtheengine.Donot
smokeorallowsparksandopenflamesnearthearea
whileaddingfueloroperatingtheunit.

WHmLE OPERATmNG

Never start or run the unit inside a closed room or

building. Breathing exhaust fumes can kill. Operate
this unit only in a well ventilated outdoor area.

• Wear safety glasses or goggles that are marked as
meeting ANSi Z87,1-1989 standards. Also wear

ear/hearing protection when operating this unit. Wear
a face or dust mask if the operation is dusty. Long

sleeve shirts are recommended.

• Wear heavy, long pants, boots and gloves. Do not
wear loose clothing, jewelry, short pants, sandals or

go barefoot, Secure hair above shoulder level.

• The cutting attachment shield must always be in place
while operating the unit. Do not operate unit without

both trimming lines extended, and the proper line

installed. Do not extend the trimming line beyond the
length of the shield.

This unit has a clutch. The cutting attachment remains
stationary when the engine is idling. If it does not, have

the unit adjusted by an authorized service technician.
Adjust the D-handle to your size to provide the best

grip.

• Be sure the cutting attachment is not in contact with
anything before starting the unit.

• Use the unit only in daylight or good artificial light.
Avoid accidental starting. Be in the starting position

whenever pulling the starter rope. The operator and
unit must be in a stable position while starting. See

Starting/Stopping Instructions.

• Use the right tool. Only use this tool for the purpose
intended.

• Do not overreach. Always keep proper footing and

balance.

Keep hands, face, and feet at a distance from all
moving parts, Do not touch or try to stop the cutting

attachment when it is rotating.

Do not touch the engine or muffler, These parts get
extremely hot from operation. They remain hot for a

short time after you turn off the unit,
Do not operate the engine faster than the speed

needed to cut, trim or edge, Do not run the engine at
high speed when you are not cutting.

Always stop the engine when cutting is delayed or
when walking from one cutting location to another.

If you strike or become entangled with a foreign
object, stop the engine immediately and check for

damage. Do not operate before repairing damage. Do
not operate the unit with loose or damaged parts.

Stop and switch the engine to off for maintenance,
repair, or for changing the cutting attachment or other

attachments.
Use only original equipment manufacturer

replacement parts and accessories for this unit. These
are available from your authorized service dealer. Use

of any unauthorized parts or accessories could lead to
serious injury to the user, or damage to the unit, and

void your warranty.
Keep unit clean of vegetation and other materials.

They may become lodged between the cutting
attachment and shield.

• To reduce fire hazard, replace faulty muffler and spark
arrestor, keep the engine and muffler free from grass,

leaves, excessive grease or carbon build up.

OTHER SAFETY WARNmN(SS

Never store the unit, with fuel in the tank, inside a
building where fumes may reach an open flame or

spark,

• Allow the engine to cool before storing or transporting.
Be sure to secure the unit while transporting.

• Store the unit in a dry area, locked up or up high
to prevent unauthorized use or damage, out of the

reach of children.
Never douse or squirt the unit with water or any other

liquid, Keep handles dry, clean and free from debris,
Clean after each use. See the Cleaning and Storage

instructions.
Keep these instructions. Refer to them often and use

them to instruct other users, if you loan someone this
unit, also loan them these instructions.

Always hold the unit with both hands when operating.

Keep a firm grip on both the front and rear handle or

grips.

SAVE THESE

SAFETY AND _NTERNAT_ONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.

Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOL MEANING SYMBOL

Indicates danger, warning, or

, SAFETY ALERT SYMBOL •

caution. May be used in conjunction
with other symbols or pictographs.

', WARNING - READ OPERATOR'S

MANUAL
Read the Operator's Manual(s) and

follow all warnings and safety
instructions. Failure to do so can

result in serious injury to the
operator and/or bystanders.

WEAR EYE AND HEARING
PROTECTION

I

O

WARNING: Thrown

objects and loud noise can cause
severe eye injury and hearing loss.
Wear eye protection meeting ANSI

Z87.1-1989 standards and ear
protection when operating this unit.

Use a full face shield when needed.

MEANING
,, THROWN OBJECTS AND

ROTATING CUTTER CAN CAUSE

SEVERE INJURY

WARNmNG: Donot

operate without the cutting
attachment shield in place. Keep
away from the rotating cutting

attachment.

', ON/OFF STOP CONTROL

ON / START / RUN

,, ON/OFF STOP CONTROL

OFF or STOP

', HOT SURFACE WARNmNG

Do not touch a hot muffler or

cylinder. You may get burned. These

parts get extremely hot from

operation. When turned off they
remain hot for a short time.

', KEEP BYSTANDERS AWAY

WARNmNG: Keepa,

bystanders,especiallychildrenand
pets,atleast50 feet(I5 m.)fromthe
operatingarea.

UNLEADED FUEL

Alwaysuse clean,freshunleadedfuel.

', OIL

Refer to operator's manual for the
proper type of oil.

APPMCATmONS
As a trimmer:

• Cutting grass and Hight weeds,

• Decorative trimming around trees, fences, etc,

Other optional accessories may be used with the
TB20CS, Refer to Operadng the EZ-Link .System for

a Hist of add-ons,

Blue EZ-Start TM Lever

Starter Rope Gri f

AirFHter/Muffler

Cover

Engine \

Stand

BmueEZ=Start

Lever

/

Muffler

D=Hand_e

On/Off Stop

Control

Muffler

Spark Plug

Shaft Grip

Throttle
Controm

Shoulder Strap Clip

ShaR Housing

EZ-Link TM

Line Cutting Blade

Cutting Attachment

Shield

/

Cutting Attachment