Tripp Lite SU2200RMNAFTA User Manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SU2200RMNAFTA
Highlights
2200VA / 2.2kVA on-line, double-conversion, extended-run 2U rack / tower
UPS
Maintains sine-wave 100/110/120V +/-2% output during overvoltages to 138
and brownouts as low as 65V (50/60Hz auto-sensing)
Simultaneous communications via HID compliant USB port, serial port,
SNMP/Web card slot and EPO interface
Fault tolerant auto-bypass mode, current monitoring and switched PDU control
via 2 switchable output load banks
Input: NEMA 5-20P (120V) / Output: 6 NEMA 5-15/20R and 1 NEMA L5-20R
(120V)
2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA &
Canada only)
Description
2200VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 2U rackmount form factor with an
installed depth of only 19 in. Expandable battery runtime with optional BP48V60-3UNAFTA external battery packs. Full-time sine wave 100, 110 or
120V +/-2% output. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then
re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and
overvoltages to 138V. NEMA 5-20P input plug; NEMA 5-15/20R and NEMA L5-20R output receptacles. Network-grade AC surge and noise
suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via USB
port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto
shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power
conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface.
Integrated 2-bank PDU switching supports load shedding and remote-reboot of connected equipment. 3-stage metered current monitoring and
battery charge status LEDs. LED display panel easily rotates for better viewing in rackmount or tower configurations. Dataline surge suppression for
dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass mode.
4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories available.
Field-replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance
connected equipment insurance; extended warranty and service contracts available
Applications
Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.
Package Includes
SU2200RMNAFTA On-line Double-Conversion UPS System PowerAlert Software and cabling Mounting hardware for 4 post rack enclosures
Instruction manual with warranty information
Features
SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial network applications True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage conditions Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values Standard internal battery set offers 18 minutes runtime at half load (800W) and 6 minutes at full load (1600W) Optional BP48V60-3UNAFTA external battery pack increases runtime to 132 minutes at half load (800W) and 61 minutes at full load (1600W/multi-pack compatible) Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches Ships with all mounting accessories for 4 post rackmount installation Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation Optional 2-9USTAND accessory enables small-footprint upright tower placement Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter sutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage setpoints Built-in Emergency Power Off (EPO) interface with cable NEMA 5-20P input plug (user-installable NEMA 5-15P replacement plug included)/NEMA 5-15/20R & NEMA L5-20R output receptacles Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (bank 1 has two outlets/bank two has four outlets) Front panel LEDs offer current monitoring and battery charge level information UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required Single line TEL/DSL or network ethernet line surge suppression 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance
Specifications
SYSTEM OVERVIEW
Voltage compatibility
120V AC (100/110/120V)
Frequency compatibility
50/60 Hz compatible (auto-sensing)
OUTPUT
Output VA 2200
Output watts 1600
Output nominal voltage
120V AC (100/110/120V)
Output voltage regulation
Maintains full-time sine wave output within 2% of selected nominal, less than 3% total harmonic distortion (linear load) / 5% total harmonic distortion (computer load) (Less than 5% THD on-line and on-battery)
Output frequency regulation
Regulates line frequency to 50/60Hz +/- 0.05Hz
Outlet quantity / type
6 NEMA 5-15/20R, 1 NEMA L5-20R
Customized load management receptacles
2 controllable load banks support load shedding and remote reboot on demand of locked network devices (bank 1 has 2 outlets / bank 2 has 4 outlets)
Loading...
+ 3 hidden pages