Tripp-Lite SMART750RMXL2U Specifications

SmartPro 120V 750VA 600W Line-Interactive Sine

Highlights

.75kVA / 750VA / 600W line

interactive 2U rack/tower UPS,

Sine wave output

120V output, Corrects brownouts

and overvoltages from 83V to

147V

0.8 Power Factor, Interactive

LCD interface

Extended runtime options up to

450W

4 post compatible mounting

accessories

95% line-mode efficiency, 2

switched load banks

USB, RS232, EPO and slot for

Network Management Card

options

120V NEMA 5-15P input, 6

NEMA 5-15R outlets

Package Includes

SMART750RMXL2U UPS

System

PowerAlert software with USB,

Serial & EPO cabling

4 post installation kit

Owner's manual

Wave UPS, 2U, Extended Run, Network Card
Options, LCD, USB, DB9

MODEL NUMBER: SMART750RMXL2U

Description

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for

critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply(UPS)

with built-in Auto-Voltage Regulation(AVR) actively corrects brownouts and overvoltages back to usable levels

while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating

mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options.

Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected

equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating

costs. Network management interfaces support communications via USB, RS-232 and slot for optional Network

Management Card options, such as Tripp Lite's SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power

management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels,

self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and

real-time remote reboot and load shedding of select outlets. Emergency Power Off(EPO) interface. LCD display panel easily rotates for viewing in rackmount

or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test.

Field-replaceable, hot-swappable battery modules.

Features

Tripp Lite SMART750RMXL2U line interactive 2U rack/tower UPS with 750VA /.75kVA / 600W capacity and extended runtime options

Line interactive UPS with Automatic Voltage Regulation(AVR) corrects brownouts and overvoltages from 83 to 147V

NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switched output load banks

Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages

High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions

Internal batteries offer 20.7 minutes at 50% load(300W) and 8.5 minutes at 100% load(600W)

Extended runtime is available with optional BP24V15RT2U(limit 1), BP24V28-2U(limit 1), BP24V70-3U(multi-pack compatible) and

BP24V36-2US(multi-pack compatible); Output is reduced to 450 watts maximum with external battery packs

External battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)

Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment

Intelligent battery management system extends battery life

Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens

of detailed UPS and site power information

LCD interface also supports a number of advanced user setup and operating preferences

Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND

enables tower placement

Built-in USB, RS-232 and slot for optional Network Management Card options, such as Tripp Lite's SNMPWEBCARD network interface

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software; Built-in Emergency Power Off(EPO) interface with cable

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 750

Output Watt Capacity (Watts) 600

Output Capacity Details Output is reduced to 450 watts when used with external battery packs

Power Factor 0.8

Nominal Output Voltage(s)
Supported

Nominal Voltage Details 120v nominal output in battery mode

Frequency Compatibility 60 Hz

Output Voltage Regulation (Line
Mode)

Output Voltage Regulation (Battery
Mode)

Output Receptacles (6) 5-15R

Load Management Receptacles Two switchable two-outlet 5-15R load banks

Output AC Waveform (AC Mode) Sine wave

Output AC Waveform (Battery Mode) Pure Sine wave

INPUT

Rated input current (Maximum Load) 7.5A

Nominal Input Voltage(s) Supported 120V AC

UPS Input Connection Type 5-15P

Input Circuit Breakers 10A

UPS Input Cord Length (ft.) 10

110V; 115V; 120V

-21%, +8%

+/- 5%

UPS Input Cord Length (m) 3.05