Tripp-Lite SMART500RT1U Specifications

SmartPro 120V 500VA 300W Line-Interactive UPS,

Highlights

500VA line-interactive 1U

rack/tower UPS

120V nominal output during

brownouts as low as 90V

USB, RS232, EPO and slot for

Network Management Card

options

Front panel status LEDs; 1

switched output load bank

NEMA 5-15P input; 7 NEMA

5-15R outlets

Package Includes

SMART500RT1U UPS System

Mounting hardware

Cabling for USB & DB9

monitoring and EPO switching

PowerAlert unattended shutdown

and UPS/Power monitoring

software

Instruction manual

1U Rack/Tower, Network Card Options, USB, DB9
Serial

MODEL NUMBER: SMART500RT1U

Description

Tripp Lite's SMART500RT1U intelligent, line-interactive rack/tower uninterruptible power supply prevents data

loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges.

Requires only one rack space(1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 14.6 minutes half

load runtime and 3.2 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA/300

watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a

single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend

battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup.

Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring

and unattended shutdown software with complete cabling. Built-in accessory slot supports Network Management Card options, such as Tripp Lite's

SNMPWEBCARD network interface. Emergency Power Off(EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the

case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status.

Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive

all-black color scheme.

Features

Tripp Lite SMART500RT1U.5 kVA / 500VA / 300 watt line interactive UPS

1U rack / tower compatible form factor

NEMA 5-15P input connection; 7 NEMA 5-15R output receptacles

Installed depth of only 11.8 in / 29.8 cm

Large internal batteries offer runtimes of 14.6 minutes at half load(250VA/150 watts) and 3.2 minutes at full load(500VA/300 watts)

Intelligent battery management system extends battery life

Maintains regulated 120V nominal output during brownouts as low as 90V

Includes 6 UPS-supported outlets and 1 surge-only outlet

One of the UPS supported outlets is switched for remote load shedding or rebooting of an individual device

PowerAlert UPS monitoring software enables detailed site power and UPS status updates with support for unattended shutdown of connected systems

as UPS batteries become depleted

Supports detailed monitoring of equipment load levels,self-test data, and utility power condition via built-in RS-232 and USB interfaces

Optional Network Management Card options, such as Tripp Lite's SNMPWEBCARD network interface

Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard power off/on

reboot of connected equipment - ideal for unattended kiosk applications(requires optional WATCHDOGSW)

Emergency Power Off(EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Field-replaceable, hot-swappable internal UPS batteries

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 500

Output Watt Capacity (Watts) 300

Nominal Output Voltage(s)
Supported

Nominal Voltage Details 120v nominal output in battery mode

Frequency Compatibility 60 Hz

Output Voltage Regulation (Line
Mode)

Output Voltage Regulation (Battery
Mode)

Output Receptacles (6) 5-15R

UPS Output Receptacles (Surge
Suppression Only)

Load Management Receptacles One switchable single-outlet 5-15R load bank

Output AC Waveform (AC Mode) Sine wave

Output AC Waveform (Battery Mode) PWM sine wave

INPUT

Rated input current (Maximum Load) 5.6A

Nominal Input Voltage(s) Supported 120V AC

UPS Input Connection Type 5-15P

110V; 115V; 120V

-15%, +13%

+/- 5%

6 UPS outlets, 1 surge-only outlet

Input Circuit Breakers 15A

UPS Input Cord Length (ft.) 10

UPS Input Cord Length (m) 4.5