TRENDNET TVIP562-762 Users Manual

TRENDnet User’s Guide

TV-IP562WI 720P 無線夜視網路攝影機

Megapixel Wireless Day/Night Network Camera

Cover Page

TRENDnet User’s Guide

Contents

Product Overview .................................................................................... 1

Package Contents ................................................................................................................ 1

Features ................................................................................................................................ 1

Product Hardware Features ................................................................................................ 2

Installation ............................................................................................... 3

Wired Connection ................................................................................................................ 3

WPS Connection .................................................................................................................. 4

Wall mount installation ....................................................................................................... 5

Using the AutoRun Wizard ....................................................................... 6

Wireless Connection .......................................................................................................... 13

Using WPS...................................................................................................................... 13

Connecting Wireless Network Manually ..................................................................... 17

Mobile Apps ........................................................................................... 22

Configuration ......................................................................................... 23

Main Web User Interface .................................................................................................. 26

Setup ................................................................................................................................... 28

Wizard ................................................................................................................................. 28

Step 1: LAN Settings ...................................................................................................... 29

Step 2: Internet Settings ............................................................................................... 29

Step 3: DDNS Settings ........................................................................................................ 30

Step 4: Camera Name Settings .................................................................................... 30

Step 5: Time Settings .................................................................................................... 30

Step 6: Setup Complete ................................................................................................ 33

System ................................................................................................................................ 33

Admin............................................................................................................................. 34

Time and Date ............................................................................................................... 35

Table of Contents

Network .............................................................................................................................. 36

Network ......................................................................................................................... 37

Wireless Setup .............................................................................................................. 38

Dynamic DNS ................................................................................................................. 39

Audio/Video ....................................................................................................................... 39

Audio and Video ............................................................................................................ 40

Image Setup................................................................................................................... 42

Action .................................................................................................................................. 42

Recording ....................................................................................................................... 43

Video Clip ....................................................................................................................... 45

Snapshot ........................................................................................................................ 47

SD Management ........................................................................................................... 50

Motion Detection............................................................................................................... 50

Sound Detection ................................................................................................................ 51

Tools.................................................................................................................................... 51

System ........................................................................................................................... 52

Firmware Update .......................................................................................................... 52

Advanced ............................................................................................................................ 53

Device Info ..................................................................................................................... 53

Log .................................................................................................................................. 54

Knowledge Base ..................................................................................... 55

Install TRENDnetVIEW Pro Software ................................................................................ 55

How to setup/access the camera remotely ..................................................................... 56

Technical Specifications ......................................................................... 60

Troubleshooting ..................................................................................... 62

TRENDnet User’s Guide

Product Overview

TV-IP562WI

Package Contents

In addition to your camera, the package includes:

 Multi-Language Quick Installation Guide  CD-ROM (Utility & User’s Guide)  Network cable (1.8m/6ft)  Power adapter (12V DC, 1A)  Camera mounting kit

If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor that the item was purchased.

TV-IP562WI

Features

The IP camera records at 1280x720 pixels (HD), 30 FPS (frames per second). You can manage up to 32 TRENDnet cameras with the included complimentary camera management software. The IP camera also includes adjustable motion detection recording areas, email alerts, and scheduled recording sessions. Some other features of the IP camera are date-and-time overlays, two-way audio, a fixed lens, and four times digital zoom. A wall/ceiling mounting kit is included and the camera’s white housing blends into most environments.

Easy Installation The IP camera includes a CD-ROM with a setup wizard that guides you through the installation process. Wide Platform Support The IP camera supports TCP/IP networking, HTTP, and other Internet related protocols and can be integrated easily into other Internet/Intranet applications because of its standards-based features. 10/100 Ethernet Support The IP camera supports 10/100Mbps Ethernet. Web Configuration Once the setup is complete, administrators can use a standard Web browser to; access images and video, configure the camera over an intranet or over the Internet. Administration by a Web browser over the Internet means the IP camera can be accessed and administered from anywhere in the world. Broad Range of Applications

With today’s high-speed Internet connections, many scenarios for the application of your network camera exist, including industrial and public monitoring of properties such as homes, offices, banks, hospitals, child-care centers and amusement parks.

Recording Quality The IP camera can record 1280x720 (720p) video resolution.

TRENDnet User’s Guide

Product Hardware Features

Front Panel View

TV-IP562WI

Rear Panel View

1. Light Sensor – Detects the light source to turn IR on or off.

2. IR LED – Built-in IR LED for night vision use.

3. Camera Lens – Fixed lens. The camera adjusts automatically.

4. Microphone – Built-in microphone for audio can be turned on or off.

5. WPS Indicator – This LED indicator is solid blue when your camera is powered on. If this LED indicator is off, there is no power to your camera. This LED indicator is blinking green when there is connection/data to your camera.

6. WPS Button – Use this button to enable WPS.

7. Link – This LED indicator is solid blue when your camera is powered on. If this LED indicator is off, there is no power to your camera. This LED indicator is blinking green when there is connection/data to your camera.

8. Stand – Portable adjustable stand.

1. Power Port – Connect the included power adapter from your camera to an available power outlet. Note: Use only the adapter that came with your camera.

2. Line Out – Insert an external active speaker.

3. LAN Port – Connect Ethernet cables to your wired network devices.

4. Micro SD Slot – Insert a micro SD card into this slot to store video/image data.

5. Reset Inset Button – Use an item such as a paperclip to push and hold this button for 6 seconds and release to reset your camera to its factory defaults.

Note: Use only the adapter that came with your camera.

TRENDnet User’s Guide

Installation

Wired Connection

1. Connect the Ethernet Cable. If you intend to use the network camera as a wired device, connect one end of the included Ethernet cable into the Ethernet port on the rear panel of the camera and connect the other end to an available port on your network. If you prefer to use the camera on a wireless network, see below for instructions on connecting the power adapter.

TV-IP562WI

2. Attach the Power Supply. Attach the included power supply to the DC 12V 1.0A receptor on the rear panel of the camera and then connect it to a wall outlet or power strip. A blue LED will light up under the lens indicating that the camera has power.

TRENDnet User’s Guide

3. Attach the Power Supply. Attach the included power supply to the DC 12V 1.0A receptor on the rear panel of the camera and then connect it to a wall outlet or power strip. A blue LED will light up under the lens indicating that the camera has power.

TV-IP562WI

WPS Connection

An alternative method of connecting your camera to your network is by using WPS. WPS is a quick, simple and secure method of adding devices to a network. If you have a router which supports WPS follow the steps below, otherwise, please use the wired mode of setting up the camera.

4. Attach the Power Supply

5. Press the WPS button on your wireless device then press the WPS button on the camera.

TRENDnet User’s Guide

TV-IP562WI

Wall mount installation

To attach the metal plates carry out the following:

 Remove the two rubber pads under the base of the Camera.  Slide the metal plate onto the base of the camera, making sure that the two

holes on the base of the camera align with the two screw holes on the base of the camera.

 Secure the metal plate to the base of the Camera with the two screws provided.  The camera can now be mounted to the ceiling or a wall. See the diagram

below for more information.

TRENDnet User’s Guide

Using the AutoRun Wizard

Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will run automatically.

Note: If the Install Wizard does not run, you may have auto-run disabled on your machine. In this case, browse to the CD drive and run InstallWizard.exe to begin the installation wizard.

Begin by selecting a language from the drop-down list. There is a choice of five languages – English, French, German, Spanish, and Russian.

TV-IP562WI

French

English

TRENDnet User’s Guide

TV-IP562WI

German

Spanish

TRENDnet User’s Guide

TV-IP562WI

Russian

1. Click Install Camera and follow the on-screen steps to continue the installation.

2. This step references information on the camera itself. Go to your camera and check the details at the bottom of the device. Click Next to continue, Back to go to the previous screen or Home to return to the main menu. Also enclosed, is a sticker with the same details attached.

TRENDnet User’s Guide

TV-IP562WI

3. The most important part of the setup process is the network connection type. There are three options:

a. Connect camera to your network using a network cable b. Connect camera to your wireless network using Wi-Fi Protected Setup

(WPS) button (Verify your router has a WPS button. If not, select the next option).

c. Connect camera to your wireless network manually. The basic connection type is the first option, using a network cable. Let’s begin the installation process using the network cable connection first. Click this

radio button and click Next to continue, Back to go to the previous screen or Home to return to the main menu.

4. Follow the instructions in the next screen to Power up the Camera. Connect one end of the power adapter to the camera and watch the LED flicker. Click

Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

TRENDnet User’s Guide

TV-IP562WI

5. Connect one end of the network cable to your camera and the other end to your router. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

6. The wizard searches the network for your camera.

TRENDnet User’s Guide

TV-IP562WI

7. If you only have one camera on your network, the wizard will automatically select it. Otherwise, if you have more than one camera, it provides several options from the list. The wizard provides the Model Name and MAC Address of the camera. If you do not see any of your camera(s) in the wizard, click Retry to scan for the camera again. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

8. Password Settings. Follow the instructions on the screen. The default username and password is admin. Tick the Change Password checkbox to enter the new password details. The password should be between 1 and 30 characters. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

TRENDnet User’s Guide

TV-IP562WI

If you have entered the incorrect admin details, you are prompted to change the configuration, as shown below.

9. The initial setup is complete. Click the link to navigate to the camera’s Web User Interface for further configuration or click Next to continue to the next step.

TRENDnet User’s Guide

TV-IP562WI

Wireless Connection

Using WPS

The Mobile App section allows the user to download the TRENDnet Mobile App either for Apple iOS or Android™1 devices. To use this feature, the user must have a QR Code Scanner App on their mobile device. This is also available from the Apple App Store or Google Play™2.

You are now ready to use your camera. Click Finish to exit.

Android is a trademark of Google Inc.

Google Play is a trademark of Google Inc.

The WPS connection type is the second option, using a wireless router. Click this radio button and click Next to continue, Back to go to the previous screen or Home to return to the main menu.

TRENDnet User’s Guide

TV-IP562WI

10. Follow the instructions on the screen to Power up the Camera. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

11. Follow the instructions and click Next to continue. If you wish to go to the previous screen, click Back or Home to return to the main menu.

TRENDnet User’s Guide

TV-IP562WI

12. If you only have one camera on your network, the wizard will automatically select it (as shown below). Otherwise, if you have more than one camera, it provides several options from the list. The wizard provides the Model Name and MAC Address of the camera. If you do not see any of your camera(s) in the wizard, click Retry to scan for the camera again. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

13. Password Settings. Follow the instructions on the screen. The default username and password is admin. Tick the Change Password checkbox to enter the new password details. The password should be between 8 and 16 characters. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

TRENDnet User’s Guide

TV-IP562WI

14. The initial setup is complete. Click the link to navigate to the camera’s Web User Interface for further configuration or click Next to continue to the next step.

15. The Mobile App option allows the user to download the TRENDnet Mobile App either for Apple iOS or Android™ format. To use this feature, the user must have a QR Code Scanner App on their mobile device. This is also available from the Apple App Store or Google Play™. You are now ready to use your camera. Click Finish to exit.

TRENDnet User’s Guide

Connecting Wireless Network Manually

TV-IP562WI

The manual wireless connection type is the third option, using a wireless router. Click this radio button and click Next to continue, Back to go to the previous screen or Home to return to the main menu.

16. Follow the instructions in the next screen to Power up the Camera. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

TRENDnet User’s Guide

TV-IP562WI

17. Connect one end of the network cable to your camera and the other end to your router. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

18. If you only have one camera on your network, the wizard will automatically select it (as shown below). Otherwise, if you have more than one camera, it provides several options from the list. The wizard provides the Model Name and MAC Address of the camera. If you do not see any of your camera(s) in the wizard, click Retry to scan for the camera again. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

TRENDnet User’s Guide

TV-IP562WI

19. Password Settings. Follow the instructions on the screen. The default username and password is admin. Tick the Change Password checkbox to enter the new password details. The password should be between 8 and 16 characters. Click Next to continue, Back to go to the previous screen or Home to return to the Main Menu.

20. Once your wireless network is discovered, the wizard provides you with an option to select the Available Wireless Network and also to provide a Wireless

Network Password. If you do not see your wireless network details, click the Rescan link to scan the network again.

+ 48 hidden pages