TRENDnet TK-CAT508 Quick Reference Guide

Command

Hot Keys Description

OSD

TK-CAT508 General Quick Reference Sheet

Show OSD Menu

Select Computer

Previous / Next Computer Port

Stop Autoscan

Autoscan

Auto Logout Timeout Enable / Disable (0-60 minutes)

Select the active computer

Select the previous, next or previously active computer

Autoscan through your computers (based on the selected advanced autoscan mode)

End autoscan activity

Specify the time out for auto logout. KVM switch will prompt you to enter user name and password. [Default disable = 0 minute ]

Use arrow keys to select and then hit Enter key to confirm

—

F1 Auto Logout. Use left and right arrows to select

Scroll Lock

Backspace

Space Bar

(x)

(Y)

(X) = 1-9

1 = 10 seconds 2 = 20 seconds 3 = 30 seconds

4 = 40 seconds 5 = 50 seconds 6 = 60 seconds

(Y) = Scroll Lock, Caps Lock, F12 or Num Lock

Autoscan with Programmable Delay Time

Specify a delay within a range of 10–90 seconds [Default: 10 seconds].

Press any key on keyboard

—

Enable / Disable Beep

Change Computer Name

Toggle On/Off beep during autoscan mode

Change the computer name

—

F1  Hotkey Use left and right arrows to select (Scroll Lock, Caps Lock, F12 or Num Lock)

Use the up/down arrow keys to select, then hit Insert key to edit

Use arrow keys to select then hit Enter key to confirm

Select the hot key preceding sequence among 4 alternative keys

—

Scroll Lock Scroll Lock

++ +

(YZ)= 01-08 for computer port

7 = 70 seconds 8 = 80 seconds 9 = 90 seconds

—

Define Hot Key Sequence (Default = Scroll Lock + Scroll Lock)

Activates OSD menu

TK-CAT508

TK-CAT508(V1) /11.11.2013

Command

Hot Keys Description

OSD

TK-CAT508 Quick Reference Sheet

Enable / Disable Password

System Information

Change Username and Password

Title Bar Position (Left/Right/Disable)

Title Duration (0 - 60 seconds)

OSD Menu Timeout (0 - 60 seconds)

Enable / disable password protection [Default: disable]

Shows model and firmware version of the TK-CAT508

Change the username and password. Max. 8 characters for username and password. [Default username: ADMIN; Default password: ADMIN]

Specify the timeout for OSD menu [Default: 30 seconds; 0 = disable]

Select the OSD title bar position on your screen [Default: right]

Specify the timeout for OSD title bar [Default: 30 seconds; 0 = disable]

—

F1  User configuration  Title Bar. Use left and right arrows to select

F1  Password

—

F1  User Configuration  F1

—

F1  User configuration

F1  User configuration  OSD timeout

—

F1  User configuration  Title duration

OSD Appearance

Load default

Upgrade firmware

F1  User configuration  OSD Appearance

If enabled, OSD will stay on the screen when you switch to a different port. [Default: disabled]

Restore KVM to factory default settings.

Upgrade firmware on the KVM switch. When selected, the KVM switch enters firmware mode. Please see upgrade firmware file for instructions.

Logout of the OSD

Increases the brightness of the screen if necessary

Exit OSD

Logout

Brightness

Exit

F1  Load default

F1  Upgrade Firmware

F10

ESC

—

TK-CAT508

Note: 1: The hotkey sequence ( ) denotes that you hit the individual key consecutively, one

Scroll Lock

at a time, not simultaneously.

2. After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key again. You then have another 2 seconds to press a command key. A beep confirms that the KVM switch is in "hot key" mode. If you do not press a key within 2 seconds, the switch will exit hot key mode.

3. OSD menu control is only available when the OSD menu is activated. To activate the OSD menu, use the hot key sequence . When the OSD menu is active, the mouse will be locked until you exit the OSD menu.

4. To reset the KVM switch OSD password, enter 00000000 in the username and password field and press the reset button in the back of the device. The password and password protection will reset to default settings. If you do not see the username and password field, press to activate the OSD. Press F10 to logout.

TK-CAT508(V1) /11.11.2013

Scroll Lock

Space Bar

(Key)

Scroll Lock

Space Bar