TRENDnet TEG-30262 Specsheet

TEG-30262

24-Port Gigabit Switch with 2 x 10G SFP+ Slots

TEG-30262 (v1.0R)

• 24 x Gigabit ports

• 2 x 10G SFP+ slots

• 88Gbps switching capacity

• 1U rack mountable (brackets included)

• Fanless Design

• Lifetime Warranty*

TRENDnet’s 24-Port Gigabit Switch with 2 x 10G SFP+ Slots, model TEG-30262, provides high bandwidth performance, ease of use, and reliability,
all while reducing power consumption by up to 70%*. This 10G SFP switch offers two dedicated 10G SFP+ slots for high-speed network connections,
providing a cost-effective solution in adding 10G link capability to an SMB network. With a sturdy metal housing and included rackmount brackets, the
10G SFP switch is well-suited for 19” 1U rack installations.

TEG-30262

10G SFP+ Switch

Offers two dedicated 10G SFP+ slots for
high-speed network connections, providing
a cost-effective solution in adding 10G link
capability to an SMB network.

Networking Solution

Fanless

Fanless design lowers energy consumption
and eliminates operating noise.

Rackmount Design

With a sturdy metal housing and included
rackmount brackets, this 10G SFP switch
is well-suited for 19” 1U rack installations.

Ports

24 x Gigabit ports and 2 x 10G SFP+
slots for high speed connections

Switching Capacity

88Gbps switching capacity

Jumbo Frame

Sends larger packets, or Jumbo Frames
(up to 10KB) for increased performance

Housing Design

10G SPF switch with sturdy rack mountable
metal housing with included mounting kit

Fanless

Fanless design lowers energy consumption
and eliminates operating noise

Energy Savings

Embedded GREENnet technology
reduces power consumption by up
to 70%*

LED Indicators

LEDs convey port status

Specifications

TEG-30262

Standards • IEEE 802.3

Device Interface • 24 x Gigabit ports

Data Transfer Rate

Performance

Power

Fan/Acoustics

• IEEE 802.3u

• IEEE 802.3ab

• IEEE 802.3x

• IEEE 802.1p

• IEEE 802.3ae

• IEEE 802.3az

• 2 x 10G SFP+ slots

• LED indicators

• Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)

• Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)

• Gigabit Ethernet: 2000Mbps (full duplex)

• 10 Gigabit Ethernet: 20Gbps (full duplex)

• Switching Capacity: 88Gbps

• RAM Buffer: 1.5MB

• MAC Address Table: 16K entries

• Forwarding Rate: 65.5Mpps (64-byte packet size)

• Jumbo Frames: 10KB

• Input: 100 – 240V AC, 50/60Hz, internal power supply

• Max. Consumption: 18.9W

• Fanless design

Operating
Temperature

Operating
Humidity

Dimensions

Weight

Certifications • CE

Warranty • Lifetime

• 0° – 40° C (32° – 104° F)

• Max. 90% non-condensing

• 440 x 130 x 44mm (1.57 x 5.1 x 1.73 in.)

• 1.935kg (4.27 lbs.)

• FCC

• ETL

PACKAGE CONTENTS

• TEG-30262

• Quick Installation Guide

• Rackmount kit

• Power cord (1.8m/6 ft.)

TRENDnet offers a lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry
a one-year warranty.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com

TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subjectto change
at any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.

Updated: 12/20/2018