Trendnet TEG-224WSPLUS User Manual [de]

Quick Installation Guide

TEG-224WSplus

Table of Contents

Table of Contents

Deutsch .....................................................................................................

1. Bevor Sie anfangen ...........................................................................

Installation der Hardware

2. ..................................................................

Webmanagement-Programm ............

3. ................................................

Troubleshooting ........................................................................................

1

1
2
3

6

Version 04.28.2006

1. Bevor Sie anfangen

Systemanforderungen

Webbrowser: Internet Explorer (5.0 oder höher), Netscape Navigator
(6.0 oder höher)

Computer mit installiertem Netzwerkadapter

Anwendung

26-Port 10/100/1000Mbps

Gigabit Web Smart Switch

(TEG-224WSplus)

Packungsinhalt

TEG-224WSplus
Anleitung zur Schnellinstallation
Dienstprogramm-CD
2 Montageklammern mit Schrauben
Stromkabel

5-Port 10/100/1000Mbps

5-Port 10/100/1000Mbps

Copper Gigabit Switch

(TEG-S50TXE)

Copper Gigabit Switch

with Mini-GBIC

(TEG-S41SX)

Workstations with

10/100Mbps Ethernet Card

(TE100-PCIWN)

1000Mbps

Workstation with 32-bit 10/100/1000Mbps

Copper Gigabit PCI Adapter

(TEG-PCITXR)

1

Deutsch

Workstations with 10/100/1000Mbps

Copper Gigabit PCI Adapter

(TEG-PCITXR)

2. Installation der Hardware

1. Schließen Sie das Stromkabel an
der Rückseite des
TEG-224WSplus an und stecken
Sie es in eine Steckdose.

2. Verbinden Sie den Computer über
ein Kat.5-Netzwerkkabel mit
einem freien Ethernet-Port des
TEG-224WSplus.

2

Deutsch

3. Webmanagement-Programm

Hinweis: Installieren und verwenden Sie das Webmanagement-Programm,
wenn Sie alle webbasierten Switches Ihres Netzwerks problemlos auffinden,
IP-Adressen zuweisen, Kennwörter ändern und die Firmware aktualisieren
wollen.

Für Benutzer von Windows

1. Legen Sie die Dienstprogramm-

CD in das CD-ROM-Laufwerk

Ihres Computers ein und klicken
Sie auf Install Utility (Programm
installieren).

2. Folgen Sie den Anweisungen des

Installationsassistenten. Klicken
Sie auf OK.

3. Klicken Sie auf Start >
Programs (Programme) >
web_management_utility und

dort erneut auf

web_management_utility

3

Deutsch

4. Klicken Sie auf Discovery
(Suche). Doppelklicken Sie in der

Discovery List (Suchliste) auf den
Switch.

5. Klicken Sie in der Monitor List

(Überwachungsliste) auf den

Switch und dann auf
Configuration setting

(Konfigurationseinstellung).

6. Konfigurieren Sie IP-Adresse,

Subnet Mask, Default Gateway

und Password (Kennwort). Klicken
Sie auf Set

Deutsch

4

7. Klicken Sie auf OK.

8. Klicken Sie auf Web access

(Webzugriff).

9. Geben Sie Ihr Password

(Kennwort) ein und klicken Sie
dann auf Login (Anmelden).

Weitere Informationen zu den Konfigurations- und erweiterten Einstellungen
des TEG-224WSplus finden Sie im Abschnitt „Problembehandlung“ der
Bedienungsanleitung auf der beiliegenden CD-ROM oder auf der Website von
Trendnet unter http://www.trendnet.com.

5

Deutsch

Troubleshooting

After connecting the TEG-224WSplus to a power outlet, the LEDs do not turn on.

Q1:

Check the connection of the power cord to the TEG-224WSplus and the power outlet. Also

A1:

check that the power outlet is receiving power.

After installing the Web-Management Utility, I clicked Discovery and the Utility is unable to

Q2:

discover the TEG-224WSplus. What should I do?

Make sure that the TEG-224WSplus is powered on and that all connections are secure.

A2:

Also check that your computer's IP Address is on the same network segment as the TEG­224WSplus. The default IP Address of the Switch is 192.168.0.1 and the default password is
admin. Alternatively, you can use the web browser to configure the Switch. Type

http://192.168.0.1

When I access the TEG-224WSplus using a web browser, I get a screen that tells me “only

Q3:

one user can login”. What should I do?

Another computer is configuring the TEG-224WSplus. Please wait until the user logs off. If

A3:

the other user has already logged off and you still get the same screen, then disconnect the
power cord from the TEG-224WSplus, wait for 5 seconds, reconnect the power cord to the
TEG-224WSplus, allow 5 seconds for the Switch to power on, and then attempt to access the
web configuration page to login.

I forgot the administration password. How do I reset my TEG-224WSplus?

Q4:

Press on the reset button using a pen or paperclip for 10 seconds. The default password is

A4:

admin.

When I connect a computer to the Switch's gigabit port, the LINK/ACT LED turns on, but

Q5:

the 100Mbps LED remains off.

When the 1000Mbps LED remains off, the computer's connection speed is 10Mbps or

A5:

100Mbps (if the 100Mbps LED is on). Make sure that you have a Gigabit Ethernet adapter
installed. Also make sure to use a CAT-5e or CAT- 6 Ethernet cable.

If you still encounter problems or have any questions regarding the TEG-224WSplus, please refer to
the User's Guide included on the Utility CD-ROM or contact TRENDnet's Technical Support
Department.

Certifications

This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause
undesired operation.

into the address bar of your browser.

Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

6

TRENDnet Technical Support

.

US Canada

Toll Free Telephone: [phone]

24/7 Tech Support

Europe (Germany France Italy Spain Switzerland UK)

Toll Free Telephone: [phone]

English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET

. . . . .

Worldwide

Telephone: +(31) (0) 20 504 05 35

English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET

Product Warranty Registration

Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com

3135 Kashiwa Street
Torrance, CA 90505
USA

Copyright ©2006. All Rights Reserved. TRENDnet.