
TEG-10GECTX
10 Gigabit PCIe Network Adapter
TEG-10GECTX (v1.0R)
• Converts a PCIe slot into a 10 G Ethernet Port
• Supports 802.1Q VLAN Tagging
• Includes standard and low-profile brackets
• Windows®and Linux®support
TRENDnet’s 10 Gigabit PCIe Network Adapter, model TEG-10GECTX, converts a free PCI Express slot into a 10 Gigabit Ethernet port.

TEG-10GECTX
10 G Port
Supports five selectable speeds: 10 Gbps, 5
Gbps, 2.5 Gbps, 1 Gbps, and 100 Mbps
Networking Solution
Jumbo Frame
Sends larger packets, or jumbo frames (up to
16 KB), for increased performance
Operating Systems
Compatible with Windows®, Windows Server®,
and Linux®operating systems

TEG-10GECTX
10 G Port
Supports five selectable speeds: 10 Gbps, 5 Gbps,
2.5 Gbps, 1 Gbps, and 100 Mbps
PCI Express
Converts a PCIe 2.0 x4 slot into a 10 G Ethernet Port
NBASE-T™Ethernet Technology
NBASE-T draft specification supports 2.5 and 5 Gbps
speeds over standard Cat 5e cables at distances up to
100 m
Jumbo Frame
Sends larger packets, or jumbo frames (up to 16 KB),
for increased performance
VLAN Support
IEEE 802.1Q tagged-based VLAN support
Brackets
Supports most installations with included standard and
low-profile brackets
Operating Systems
Compatible with Windows®, Windows Server®, and
Linux®operating systems.
LED Indicators
LED indicators convey port status, link speed and
activity

Specifications
Standards
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3an
• IEEE 802.3ad
• IEEE 802.1Q
Hardware Interface
• PCIe 2.0 x4 interface
• 1 x 10 Gbps RJ-45 Ethernet port (Supported Speeds: 10 Gbps / 5 Gbps / 2.5 Gbps /
1 Gbps / 100 Mbps)
• LED indicator
• Standard and low profile brackets
Minimum Cable Requirements
• 10GBASE-T (10 Gbps): Cat 6 twisted pair @ 55 m / 180 ft. (max.) / Cat 6a or Cat 7
twisted pair @ 100 m / 328 ft. (max.)
• NBASE-T™(5 Gbps): Cat 6 twisted pair @ 100 m / 328 ft. (max.)
• NBASE-T™(2.5 Gbps): Cat 5e twisted pair @ 100 m / 328 ft. (max.)
• 1000BASE-T (1 Gbps): Cat 5e twisted pair @ 100 m / 328 ft. (max.)
• 100BASE-TX (100 Mbps): Cat 5 twisted pair @ 100 m / 328 ft. (max.)
Compatibility
• Windows®10, 8.1, 8, 7
• Windows®Server 2012, 2012 R2, 2008, 2008 R2
• Linux®2.6.x, 3.x.x, 4.6.x or later
• VMware®ESXi™5.x/6.x & Microsoft®Hyper-V
Jumbo Frames
• Up to 16 KB
Special Features
• 10GBASE-T (10 Gbps) & NBASE-T (5 Gbps / 2.5 Gbps) support for high speed
network connectivity
• Windows Server support
TEG-10GECTX
• VMware®ESXi™5.x/6.x & Microsoft®Hyper-V hypervisor support for virtualization
Additional Support
• 802.3ad LACP NIC teaming
• 802.1Q VLAN Tagging
• Microsoft Scalable Networking
• Receive-side scaling (RSS)
• Message Signaled Interrupts (MSI)
• IP, TCP, and UDP checksum offloading
• Minimize overhead with reduced host bus traffic and CPU utilization
Power
• Consumption: 4.12 W max.
Operating Temperature
• 0 - 50 °C (32 – 122 °F)
Operating Humidity
• Max. 95 % non-condensing
Certifications
• CE
• FCC
Dimensions
• 84 x 63 x 18 mm (3.3 x 2.5 x 0.7 in.)
Weight
• 62 g (2.2 oz.)
Warranty
• 3-year warranty
Package Contents
• TEG-10GECTX
• Quick Installation Guide
• CD-ROM (Driver & User’s Guide)
• Standard & low profile brackets
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 11/29/2016