Page 1
Bearings & Bushings
4607
Ball bearings (5x11x4mm) (8)
4612
Ball bearings (10x15x4mm) (2)
2728
Ball bearings (5x8x2.5mm) (2)
5119A
Ball bearings, black rubber sealed (10x15x4mm) (2)
5119
Ball bearings, blue rubber sealed (10x15x4mm) (2)
5120
Ball bearings, blue rubber sealed (12x18x4mm) (2)
5116
Ball bearings, blue rubber sealed (5x11x4mm) (2)
5114
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
5117
Ball bearings, blue rubber sealed (6x12x4mm) (2)
5118
Ball bearings, blue rubber sealed (8x16x5mm) (2)
1985
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Body & Accessories
1926
Antenna caps, vinyl (2)/ antenna spool
1726
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
3935
Body clip (mounting clip), angled, 90-degrees (10)
3935A
Body clip (mounting clip), angled, 90-degrees (black) (10)
3934
Body clips, heavy duty (12)
6715
Body mount (1)/ body mount post (2) (front)
6815R
Body mount (1)/ body mount post (2)/ body post extensions (2) (front
or rear)
1815
Body washers (8)
6716
Body washers, foam , 2mm (4)/ 3mm (4)/ 4mm (4)
3617
Body, Stampede® (clear, requires painting) (requires #3614 to
mount)
6711X
Body, Stampede® 4X4 VXL, ProGraphix® (Graphics are printed,
requires paint & final color application)/ decal sheet
2514
Decal sheet, racing sponsors
6713
Decal Sheet, Stampede® 4X4 VXL
9950
Official Team Traxxas® racing decal set (flag logo/ 6-color)
5185
Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
4974
Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
6777
Wheelie bar mounts/ rear skidplate (black)
4976
Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
5186A
Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
5186
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
Center Driveline
5119A
Ball bearings, black rubber sealed (10x15x4mm) (2)
5119
Ball bearings, blue rubber sealed (10x15x4mm) (2)
5120
Ball bearings, blue rubber sealed (12x18x4mm) (2)
5116
Ball bearings, blue rubber sealed (5x11x4mm) (2)
5117
Ball bearings, blue rubber sealed (6x12x4mm) (2)
6893G
Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/
shaft)
6893X
Bearing adapter, 6160-T6 aluminum (blue-anodized)
shaft)
6741
Cover, center driveshaft (clear)
6877A
Cover, gear (clear)
6877
Cover, gear/ motor wire hold-down clip
6814
Differential kit, center (complete)
6888
Drive hub, center, rear (1)/ 4x3 GS (1)
6888X
Drive hub, front, hardened steel (1)/ screw pin (1)
6755
Driveshaft, center, 6061-T6 aluminum (blue-anodized)
6755G
Driveshaft, center, 6061-T6 aluminum (green-anodized)
6755R
Driveshaft, center, 6061-T6 aluminum (red-anodized)
6883
Gear set, center differential (output gears (2)/ spider gears (2)/
spider gear shaft)
5148
Grease, white lithium
6884
Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/
bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8 (4)
6893
Input shaft (slipper shaft)/ bearing adapter (1)/pin (1)
6890
Plate, motor
6890X
Plate, motor, 6061-T6 aluminum (blue-anodized)
5352R
Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum
(1)/ 4.0mm NL (1))
5352X
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/
2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
5552X
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/
4.0mm NL (1)/ 5.0mm NL (1))
2575
Screws, 3x6mm button-head machine (hex drive) (6)
2554
Screws, 3x6mm cap-head machine (hex drive) (6)
3932
Screws, 3x6mm flat-head machine (hex drive) (6)
1647
Silicone grease
6878
Slipper clutch, complete
5556
Slipper pressure plate & hub (aluminum alloy)
5351
Slipper pressure plate and hub (alloy)
Chassis & Attachments
6715
Body mount (1)/ body mount post (2) (front)
6815R
Body mount (1)/ body mount post (2)/ body post extensions (2) (front
or rear)
3628
Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)
6735
Bumper, front/ skidplate, front (black)
6722
Chassis
6727
Hold down, battery (2)/ hold down retainer/ battery post/ angled body
clip
6727X
Hold down, battery/ hold down retainer/ battery post/ angled
body clip (allows for installation of taller, multi-cell batteries)
3629
Seal kit, receiver box (includes o-ring, seals, and silicone grease)
5185
Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
4974
Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
6777
Wheelie bar mounts/ rear skidplate (black)
4976
Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
5186A
Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
5186
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
Differential Components
5119
Ball bearings, blue rubber sealed (10x15x4mm) (2)
5117
Ball bearings, blue rubber sealed (6x12x4mm) (2)
5118
Ball bearings, blue rubber sealed (8x16x5mm) (2)
5381
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW
6780
Differential kit, center (complete)
6814
Differential kit, center (complete)
5136X
Differential oil kit (1 each: 10K, 30K, 50K weights)
6788
Differential, front (complete with pinion gear and differential
plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally)
6789
Differential, rear (complete with pinion gear and differential
plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally)
6783
Gear set, center differential (output gears (2)/ spider gears (4)/
spider gear shaft (2))
6882X
Gear set, differential (output gears (2)/ spider gears (2)/ spider gear
shaft, carrier support)
6781
Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring
gear gasket/ bushings (2)/ 5x10x0.5mm PTFE
(2)/ 2.5x8 CCS (4)
6881
Housings, differential, front
6880
Housings, differential, rear
6782
Output gears, center differential, hardened steel (2)
5379X
Ring gear, differential/ pinion gear, differential
5379R
Ring gear, differential/ pinion gear, differential (machined, spiral
cut) (front)
6879R
Ring gear, differential/ pinion gear, differential (machined, spiral
cut) (rear)
6879
Ring gear, differential/ pinion gear, differential (rear)
3965
Screws, 2.5x8mm cap-head machine (6)
1647
Silicone grease
Driveline Components
5119A
Ball bearings, black rubber sealed (10x15x4mm) (2)
5119
Ball bearings, blue rubber sealed (10x15x4mm) (2)
5116
Ball bearings, blue rubber sealed (5x11x4mm) (2)
9059X
Cross pin (2)/ drive pin (2) (repairs 1 axle shaft)
9057X
Differential output shafts, steel-splined constant-velocity (2)
6828A
Differential output yoke assembly, extreme heavy duty (2) (left or
right, front or rear) (assembled with external-splined half shaft)
6828X
Differential output yokes, heavy duty (2)/ screw pin (2)
6851X
Driveshaft assembly, front, heavy duty (1) (left or right) (fully
assembled, ready to install)/ screw pin (1)
6852A
Driveshaft assembly, rear, extreme heavy duty (1) (left or right)
(fully assembled, ready to install)/ screw pin (1)
6852X
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully
assembled, ready to install)/ screw pin (1)
6851R
Driveshafts, front, steel-spline constant-velocity (complete
assembly) (2)
9051X
Driveshafts, front, steel-spline constant-velocity (complete
assembly) (2)
Stampede® 4X4 VXL (Model 67086-4) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.
10x15x4mm ball bearing (black rubber sealed) (1) (for slipper
(1)/10x15x4mm ball bearing (blue rubber sealed) (1) (for slipper
friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL
-coated washers
For assistance, call 1-888-TRAXXAS, or e-mail Traxxas anytime at support@Traxxas.com REV. 210120 1419
Page 2
Page 2 Stampede® 4X4 VXL: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model 67086-4) Parts List
6852R
Driveshafts, rear, steel-spline constant-velocity (complete
assembly) (2)
9052X
Driveshafts, rear, steel-spline constant-velocity (complete
assembly) (2)
9055X
Half shaft, external splined (steel-spline constant velocity) (1)
6750
Half shaft, external splined (steel-spline constant-velocity) (1)
9056X
Half shaft, internal splined (steel-spline constant velocity) (1)
6751
Half shaft, internal splined (steel-spline constant-velocity) (1)
6850X
Half shafts, heavy duty (external splined (2)/ internal splined (2))/
metal u-joints (4)
9058X
Rebuild kit, steel-splined constant-velocity driveshafts (includes
pins and hardware for one axle shaft)
6757
Rebuild kit, steel-splined constant-velocity driveshafts (includes
pins, dustboots, lube, and hardware)
6854A
Stub axle assembly, front, outer, extreme heavy duty (1) (left or
right) (assembled with internal-splined half shaft)
6853A
Stub axle assembly, rear, outer, extreme heavy duty (1) (left or
right) (assembled with internal-splined half shaft)
6754
Stub axle, front, 5mm (steel-splined constant-velocit y
driveshaft) (1)
9054X
Stub axle, front, steel-splined constant velocit y (1)
6753
Stub axle, rear, 5mm (steel-splined constant-velocity driveshaft)
(1)
9053X
Stub axle, rear, steel-splined constant velocity (1)
6854X
Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)
6853X
Stub axles, rear, heavy duty (2)/pins (2)
Front Suspension & Steering
5114
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
6823
Bulkhead tie bars, front & rear, aluminum (blue-anodized)
6823G
Bulkhead tie bars, front & rear, aluminum (green-anodized)
6823R
Bulkhead tie bars, front & rear, aluminum (red-anodized)
6830X
Bulkhead, front
3643X
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643G
Camber links, front (TUBES green-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643R
Camber links, front (TUBES red-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
6832X
Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), left &
right
6832G
Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left
& right
6832A
Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized),
left & right
6832R
Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left &
right
6832
Caster blocks (c-hubs), left & right
6845A
Drag link, machined 6061-T6 aluminum (blue-anodized)
6845G
Drag link, machined 6061-T6 aluminum (green-anodized)
6845T
Drag link, machined 6061-T6 aluminum (orange-anodized)
6845R
Drag link, machined 6061-T6 aluminum (red-anodized)
6895
Linkage, front sway bar (2) (assembled with rod ends, hollow
balls and ball studs)
6897
Linkage, rear sway bar (2) (assembled with rod ends, hollow
balls and ball studs)
6846
Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls
(2)
3646
Screws, 3x15mm flat-head machine (hex drive) (6)
6839
Shock tower, front
6839X
Shock tower, front, 7075-T6 aluminum (blue-anodized)
6845X
Steering bellcranks/ servo saver/ servo saver spring/ servo spring
retainer/servo horn, steering
6837X
Steering blocks, 6061-T6 aluminum (blue-anodized), left & right
6837G
Steering blocks, 6061-T6 aluminum (green-anodized), left & right
6837A
Steering blocks, 6061-T6 aluminum (orange-anodized), left &
right
6837R
Steering blocks, 6061-T6 aluminum (red-anodized), left & right
6837
Steering blocks, left & right
6854A
Stub axle assembly, front, outer, extreme heavy duty (1) (left or
right) (assembled with internal-splined half shaft)
6854X
Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)
6732
Suspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/
3X16mm BCS (8)
3655P
Suspension arms, blue, front/rear (left & right), heavy duty (2)
3655R
Suspension arms, front/rear (left & right), heavy duty (2)
3655G
Suspension arms, green, front/rear (left & right), heavy duty (2)
3655X
Suspension arms, l eft & right
3655T
Suspension arms, orange, front/rear (left & right), heavy duty (2)
3655L
Suspension arms, red, fr ont/rear (left & right), heavy duty (2)
3655A
Suspension arms, white, front/rear (left & right), heavy duty (2)
6834
Suspension pin set, complete (front and rear)
6898
Sway bar kit (front and rear) (includes front and rear sway bars
and adjustable linkage)
6742X
Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
6742G
Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
6742R
Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
3643
Turnbuckles, camber link, 49mm (82mm center to center) (assembled
with rod ends and hollow balls) (1 left, 1 right)
5539
Turnbuckles, camber links, 58mm (assembled with rod ends and
hollow balls) (2)
6896
Wires, sway bar (front & rear, hard & soft) / 3x6 FCS (4)
Hardware
1926
Antenna caps, vinyl (2)/ antenna spool
1726
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
3642
Attachment screws, shock (3x12mm shoulder screws) (6)
1552
Screws, 3x8mm cap-head machine (hex drive) (6)/washers (6)/
wrench
3935
Body clip (mounting clip), angled, 90-degrees (10)
3935A
Body clip (mounting clip), angled, 90-degrees (black) (10)
3934
Body clips, heavy duty (12)
1589
Double-sided adhesive tape (25mm x 25mm) (2)
2586
Screws, 3x15mm cap-head machine (hex drive) (6)
2745
Nuts, 3mm nylon locking (12)
3647
Nuts, 4mm flanged nylon locking (steel, serrated) (8)
1747
Nuts, 4mm nylon locking (10)
1747R
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747G
Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1747P
Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4)
1747A
Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)
1985
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
5525
Rod ends (12)/ hollow balls (12)
2742X
Rod ends, short (6)/ hollow balls (6)
3347
Screws, 2.5x5mm button-head machine (hex drive) (6)
3215
Screws, 2.5x6mm cap-head machine (hex drive) (6)
3965
Screws, 2.5x8mm cap-head machine (6)
2577
Screws, 3x10mm button-head machine (hex drive) (6)
2578
Screws, 3x12mm button-head machine (hex drive) (6)
2552
Screws, 3x12mm countersunk machine (6) (hex drive)
2579
Screws, 3x15mm button-head machine (hex drive) (6)
3646
Screws, 3x15mm flat-head machine (hex drive) (6)
2583
Screws, 3x18mm button-head machine (hex drive) (6)
2580
Screws, 3x20mm button-head machine (hex drive) (6)
2591
Screws, 3x23mm button-head machine (hex drive) (6)
2582
Screws, 3x30mm button-head machine (hex drive) (6)
2592
Screws, 3x40mm button-head machine (hex drive) (6)
2575
Screws, 3x6mm button-head machine (hex drive) (6)
2554
Screws, 3x6mm cap-head machine (hex drive) (6)
2534
Screws, 3x6mm countersunk machine (6) (hex drive)
3932
Screws, 3x6mm flat-head machine (hex drive) (6)
2576
Screws, 3x8mm button-head machine (hex drive) (6)
3931
Screws, 3x8mm flat-head machine (hex drive) (6)
3937
Screws, 4x12mm button-head machine (hex drive) (6)
2542
Screws, 4x12mm countersunk machine (hex drive) (6)
2546
Screws, 4x15mm countersunk machine (hex drive) (6)
2743
Set (grub) screws, 3mm hardened (12)
3642X
Shoulder screws, Ultra Shocks (3x12 hex drive) (6)
2754
Stub axle pins (4)
2746
Washers, 3x6mm metal (12)
LED Lights
6784
LED light bar (chrome, 4 clear lights)
Manuals
6799
Owner's Manual, Stampede® 4X4 VXL
Motors & Electronics
1726
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
2260
BEC assembly (complete)
3340
Cooling fan, V elineon® VXL-3s ESC
2072A
Gear set (for 2070, 2075 servos)
2252
Gear set, metal (for 2250, 2255 servos)
3354R
Motor cover, endbell (Velineon® 3500)
6860A
Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm
NL (1)
6860R
Motor mount, 6061-T6 aluminum (blue-anodized)
3351R
Motor, Velineon® 3500, brushless (assembled with 12-gauge wire
and gold-plated bullet connectors)
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ r od ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
REV. 210120 1419
Page 3
Page 3 Stampede® 4X4 VXL: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model 67086-4) Parts List
3352R
Rebuild kit, Velineon® 3500 (includes plastic endbell, 5x11x4mm ball
bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing)
3347
Screws, 2.5x5mm button-head machine (hex drive) (6)
3932
Screws, 3x6mm flat-head machine (hex drive) (6)
2254
Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
2253
Servo case, aluminum (red-anodized) (middle) (for 2255 servo)
2251
Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for
2250, 2255 servos)
2074
Servo case/gaskets (for 2056 and 2075 waterproof servos)
2075R
Servo, digital high-speed, metal gear (ball bearing), waterproof
2075
Servo, digital high-torque (ball bearing), waterproof
2250
Servo, digital high-torque 330 coreless, metal gear (ball bearing),
waterproof
2255
Servo, digital high-torque 400 brushless, metal gear (ball
bearing), waterproof
2075X
Servo, digital high-torque, metal gear (ball bearing), waterproof
3350R
Velineon® VXL-3s Brushless Power System, waterproof (includes
mounting plate (part #3725R))
3355R
Velineon® VXL-3s Electronic Speed Control, waterproof (brushless)
(fwd/rev/brake)
Radio System, Batteries & Chargers
2849X
4000mAh 11.1v 3-Cell 25C LiPo Battery
2842X
5000mAh 7.4v 2-Cell 25C LiPo Battery
2843X
5800mAh 7.4v 2-Cell 25C LiPo Battery
2857X
6400mAh 11.1v 3-Cell 25C LiPo Battery
2976
AC to DC converter, 40W
2938X
Adapter, Traxxas® iD® LiPo battery (adapts Traxxas iD batteries
to separate balance ports)
2943
Battery charge indicators (green (4), blue (4), grey (4))
6548
Battery door, transmitter (replacement for #6516, 6517, 6528, 6529,
6530 transmitters)
2914
Battery, Power Cell AA Alkaline (4)
2926X
Battery, Power Cell, 3000mAh (NiMH, 7-C hump, 8.4V)
2941X
Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C hump, 8.4V)
2951X
Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C hump, 8.4V)
2961X
Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C hump, 8.4V)
2984
Battery/charger completer pack (includes #2969 2-amp NiMH
cell NiMH
battery (1))
2992
Battery/charger completer pack (includes #2970 iD® charger (1),
#2843X 5800mAh 7.4V 2-cell 25C LiPo battery (1))
2994
Battery/charger completer pack (includes #2970 iD® charger (1),
#2849X 4000mAh 11.1v 3-Cell 25C LiPo Battery (1))
2260
BEC assembly (complete)
2975
Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH)
2972
Charger, EZ-Peak® Dual, 100W, NiMH/LiPo with iD® Auto Battery
Identification
2973
Charger, EZ-Peak® Live Dual, 200W, NiMH/LiPo with iD® Auto
Battery Identification
2971
Charger, EZ-Peak® Live, 100W, NiMH/LiPo with iD® Auto Battery
Identification
2970
Charger, EZ-Peak® Plus, 4 amp, NiM H/LiPo with iD® Auto
Battery Identification
6525
Communication link, telemetry expander
6512
Cover plate, Traxxas Link™ Wireless Module
2978
Fuse, charger, 5A (2) (for #2974, 2975, 2977)
2072A
Gear set (for 2070, 2075 servos)
2252
Gear set, metal (for 2250, 2255 servos)
2968X
LiPo cell voltage checker/balancer (includes #2938X adapter for
Traxxas® iD® batteries)
2968
LiPo cell voltage checker/balancer (requires #2938X adapter for
Traxxas® iD® batteries)
6555
Mount, telemetry expander (fits Slash 4X4, Stampede® 4X4,
Rally, Jato®)
6535
Mount, temperature sensor (electric motors)/ wire tie/ thermal
pad
6533
Receiver, micro, TQi 2.4GHz with telemetry & TS M (5-channel)
3932
Screws, 3x6mm flat-head machine (hex drive) (6)
6552
Seal kit, expander box (includes o-ring, seals, and silicone
grease)
6526
Sensor, auto-detectable, temperature
6527
Sensor, auto-detectable, voltage
6520
Sensor, RPM (long)/ 3x4mm BCS (2)/ 3x4 GS (1)
6521
Sensor, temperature and voltage (long)
2254
Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
2253
Servo case, aluminum (red-anodized) (middle) (for 2255 servo)
2251
Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for
2250, 2255 servos)
2074
Servo case/gaskets (for 2056 and 2075 waterproof servos)
2075R
Servo, digital high-speed, metal gear (ball bearing), waterproof
2075
Servo, digital high-torque (ball bearing), waterproof
2250
Servo, digital high-torque 330 coreless, metal gear (ball bearing),
waterproof
2255
Servo, digital high-torque 400 brushless, metal gear (ball
bearing), waterproof
2075X
Servo, digital high-torque, metal gear (ball bearing), waterproof
6553X
Telemetry expander 2.0 and GPS m odule 2.0, TQi radio system
6550X
Telemetry expander 2.0, TQi radio system (for use only with
#6551X GPS module)
6551X
Telemetry GPS module 2.0, TQi radio system (for use only with
#6550X telemetry expander)
6539
Telemetry trigger magnet holder, center differential/ magnet,
5x2mm (1)/ 3x8mm BCS (3) (for use with #6814 center
differential)
6538
Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/
3x8mm CCS (3)/ 3x10mm CCS (3)
6540
Telemetry trigger magnet, 5X2mm (1)
6509R
TQi 2.4 GHz High Output radio system, 2-channel, Traxxas Link™
enabled, TSM (2-ch transmitter, 5-ch micro receiver)
6507R
TQi 2.4 GHz High Output radio system, 4-channel with Traxxas
Link™ Wireless Module, TSM (4
receiver)
6528
Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 2channel (transmitter only)
6529
Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 3channel (transmitter only)
6530
Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 4channel (transmitter only)
6511
Traxxas Link™ Wireless Module
Ready-To-Race Model
67086-4
Stampede® 4X4 VXL: 1/10 Scale Monster Truck with TQi Traxxas
Link™ Enabled 2.4GHz Radio System & Tr
Management (TS M)®
Rear Suspension
6823
Bulkhead tie bars, front & rear, aluminum (blue-anodized)
6823G
Bulkhead tie bars, front & rear, aluminum (green-anodized)
6823R
Bulkhead tie bars, front & rear, aluminum (red-anodized)
6829
Bulkhead, rear
3644X
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum,
stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
3644G
Camber links, rear (TUBES green-anodized 7075-T6 aluminum,
stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
3644R
Camber links, rear (TUBES red-anodized, 7075-T6 aluminum,
stronger than
wrench (1) (#2579 3x15 BCS (4) required for installation)
1952X
Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (2)
1952G
Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (2)
1952T
Carriers, stub axle (orange-anodized 6061-T6 aluminum ) (rear)
(2)
1952
Carriers, stub axle (rear) (2)
1952A
Carriers, stub axle (red-anodized 6061-T6 aluminum) (rear) (2)
6895
Linkage, front sway bar (2) (assembled with rod ends, hollow
balls and ball studs)
6897
Linkage, rear sway bar (2) (assembled with rod ends, hollow
balls and ball studs)
6838
Shock tower, rear
6838X
Shock tower, rear, 7075-T6 aluminum (blue-anodized)
6853A
Stub axle assembly, rear, outer, extreme heavy duty (1) (left or
right) (assembled with internal-splined half shaft)
6853X
Stub axles, rear, heavy duty (2)/pins (2)
6733
Suspension arm guards, rear (2)/ guard spacers (2)/ hollow balls (2)/
3X16mm BCS (8)
3655P
Suspension arms, blue, front/rear (left & right), heavy duty (2)
3655R
Suspension arms, front/rear (left & right), heavy duty (2)
3655G
Suspension arms, green, front/rear (left & right), heavy duty (2)
3655X
Suspension arms, l eft & right
3655T
Suspension arms, orange, front/rear (left & right), heavy duty (2)
3655L
Suspension arms, red, fr ont/rear (left & right), heavy duty (2)
3655A
Suspension arms, white, front/rear (left & right), heavy duty (2)
6834
Suspension pin set, complete (front and rear)
6898
Sway bar kit (front and rear) (includes front and rear sway bars
and adjustable linkage)
3644
Turnbuckles, camber link, 39mm (69mm center to center) (assembled
with rod ends and hollow balls) (1 left, 1 right) (fi ts front & rear on
Slash, rear on Slash 4X4)
6896
Wires, sway bar (front & rear, hard & soft) / 3x6 FCS (4)
Shock Oil
5031
Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
5032
Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
5033
Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
VXL-3s waterproof ESC, Velineon 3500 motor, and speed control
-ch transmitter, 5-ch micro
axxas Stability
peak detecting AC charger (1), #2926X 3000mAh 8.4V 7-
titanium) (73mm) (2)/ rod ends (4)/ aluminum
REV. 210120 1419
Page 4
Page 4 Stampede® 4X4 VXL: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model 67086-4) Parts List
5034
Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
5035
Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
5036
Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
5037
Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
5029
Shock oil bottle (60cc) (for mixing shock oil)
5038X
Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, &
80 wt premium shock oils with spinning carousel rack)
1667
Silicone shock oil (30 wt), 60cc
5038
Spinning carousel rack
Shocks (GTR)
7466X
Body, GTR long (hard-anodized, PTFE-coated aluminum) (1)
7466
Body, GTR long shock, aluminum (blue-anodized) (PTFE-coated
bodies) (1)
7466G
Body, GTR long shock, aluminum (green-anodized) (PTFEcoated bodies) (1)
7466A
Body, GTR long shock, aluminum (orange-anodized) (PTFEcoated bodies) (1)
7467X
Body, GTR xx-long (hard-anodized, PTFE -coated aluminum) (1)
7467
Body, GTR xx-long shock, aluminum (blue-anodized) (PTFEcoated bodies) (1)
7467G
Body, GTR xx-long shock, aluminum (green-anodized) (PTFEcoated bodies) (1)
7467A
Body, GTR xx-long shock, aluminum (orange-anodized) (PTFEcoated bodies) (1)
7468X
Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls
(4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
7468
Caps and spring retainers, GTR long/xx-long shock (upper cap
retainer (2))
5475
Multi-tool (plastic)
5158
Nuts, 2.5mm nylon locking (12)
7463
Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons,
piston nuts, shock rod ends, hollow balls) (renews 2 shocks)
5469
Rod ends (GTR shocks) (6)
7464T
Shaft, GTR long, TiN-coated (2)
7461
Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN
shafts (fully assembled, without springs) (2)
7461G
Shocks, GTR long green-anodized, PTFE-coated bodies with TiN
shafts (fully assembled, without springs) (2)
7461X
Shocks, GTR long hard-anodized, PTFE-coated bodies with TiN
shafts (assembled) (2) (without springs)
7462
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with
TiN shafts (fully assembled, without springs) (2)
7462G
Shocks, GTR xx-long green-anodized, PTFE -coated bodies with
TiN shafts (fully assembled, without springs) (2)
7462X
Shocks, GTR xx-long hard-anodized, PTFE-coated bodies with
TiN shafts (assembled) (2) (without springs)
8459
Spring retainers, lower (captured) (4)/ 2.5x10 CS (4)
7440
Spring, shock, white (GTR long) (0.623 rate orange) (1 pair)
7441
Spring, shock, white (GTR long) (0.653 rate green) (1 pair)
7444
Spring, shock, white (GTR long) (0.767 rate black) (1 pair)
7445
Spring, shock, white (GTR long) (0.810 rate pink) (1 pair)
7448
Spring, shock, white (GTR long) (0.892 rate blue) (1 pair)
7442
Spring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair)
7443
Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair)
7446
Spring, shock, white (GTR xx-long) (0.874 rate black) (1 pair)
7447
Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair)
7449
Spring, shock, white (GTR xx-long) (1.004 rate blue) (1 pair)
Shocks (Pro-level Aluminum)
2664
Big Bore shock cylinder (long) (1)
2666
Big Bore shock cylinder (XX-long) (1)
5862
Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum)
(assembled with TiN shafts and springs) (front & rear) (4)
2660
Big Bore shocks (long) (hard-anodized & PTFE-coated T6
aluminum) (assembled with TiN shafts) w/o springs (front) (2)
2662
Big Bore shocks (XX-long) (hard-anodized & PTFE-coated T6
aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
2669
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings
& washers (2) (Big Bore Shocks)
2362
Rebuild kit, Ultra shocks (for 2 shocks)
1942
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws
(2)
2742X
Rod ends, short (6)/ hollow balls (6)
2667
Shock caps, aluminum (Big Bore Shocks) (2)
1664T
Shock shafts, hardened steel, titanium nitride coated (long) (2)
2656T
Shock shafts, hardened steel, titanium nitride coated (xx-long)
(2)
1664
Shock shafts, steel, chrome finish (long) (2)
2656
Shock shafts, steel, chrome finish (xx-long) (2)
1765
Silicone diaphragms (4)
2668
Spring retainers, upper & lower (2)/ spring pre-load spacers:
1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore
Shocks)
6863
Springs, front (progressive, +10% rate, pink) (2)
6864
Springs, front (progressive, +20% rate, blue) (2)
6862
Springs, front (progressive, -10% rate, green) (2)
6861
Springs, front (progressive, -20% rate, orange) (2)
6857
Springs, front (white) (progressive rate) (2)
5860
Springs, front (white) (progressive rate) (2) (fits #5862 aluminum
Big Bore shocks)
6867
Springs, rear (progressive, +10% rate, pink) (2)
6868
Springs, rear (progressive, +20% rate, blue) (2)
6866
Springs, rear (progressive, -10% rate, green) (2)
6865
Springs, rear (progressive, -20% rate, orange) (2)
6858
Springs, rear (white) (progressive rate) (2)
5859
Springs, rear (white) (progressive rate) (2) (fits #5862 aluminum
Big Bore shocks)
Shocks (Ultra Shocks)
3642
Attachment screws, shock (3x12mm shoulder screws) (6)
3765A
Body, Ultra Shock(s) (long) (grey) (2)
3766A
Body, Ultra Shock(s) (XXL) (grey) (2)
2362
Rebuild kit, Ultra shocks (for 2 shocks)
1942
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws
(2)
2742X
Rod ends, short (6)/ hollow balls (6)
3767
Shock caps (2)/ shock bottoms (2)
3767A
Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
3767G
Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)
3767P
Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)
3767X
Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
1664T
Shock shafts, hardened steel, titanium nitride coated (long) (2)
2656T
Shock shafts, hardened steel, titanium nitride coated (xx-long)
(2)
1664
Shock shafts, steel, chrome finish (long) (2)
2656
Shock shafts, steel, chrome finish (xx-long) (2)
1765
Silicone diaphragms (4)
3769
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)
3768
Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole
(2))
3758
Springs, front (black) (2)
3758T
Springs, front (blue) (2)
3758A
Springs, front (green) (2)
3758P
Springs, front (pink) (2)
6863
Springs, front (progressive, +10% rate, pink) (2)
6864
Springs, front (progressive, +20% rate, blue) (2)
6862
Springs, front (progressive, -10% rate, green) (2)
6861
Springs, front (progressive, -20% rate, orange) (2)
3758X
Springs, front (white) (2)
6857
Springs, front (white) (progressive rate) (2)
3757
Springs, rear (black) (2)
3757T
Springs, rear (blue) (2)
3757A
Springs, rear (green) (2)
3757P
Springs, rear (pink) (2)
6867
Springs, rear (progressive, +10% rate, pink) (2)
6868
Springs, rear (progressive, +20% rate, blue) (2)
6866
Springs, rear (progressive, -10% rate, green) (2)
6865
Springs, rear (progressive, -20% rate, orange) (2)
3757X
Springs, rear (white) (2)
6858
Springs, rear (white) (progressive rate) (2)
4957
Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2)
3760
Ultra Shocks (black) (long) (complete w/ spring pre-load spacers
& springs) (front) (2)
3762
Ultra Shocks (black) (xx-long) (complete w/ spring pre-load
spacers & springs) (rear) (2)
3760A
Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers &
springs) (2)
3762A
Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers &
springs) (rear) (2)
Slipper Clutch Components
5119A
Ball bearings, black rubber sealed (10x15x4mm) (2)
6893G
Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/
10x15x4mm ball bearing (black rubber sealed) (1) (for slipper
shaft)
6893X
Bearing adapter, 6160-T6 aluminum (blue-anodized)
(1)/10x15x4mm ball bearing (blue rubber sealed) (1) (for slipper
shaft)
6814
Differential kit, center (complete)
6888
Drive hub, center, rear (1)/ 4x3 GS (1)
6888X
Drive hub, front, hardened steel (1)/ screw pin (1)
6883
Gear set, center differential (output gears (2)/ spider gears (2)/
spider gear shaft)
(2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower
REV. 210120 1419
Page 5
Page 5 Stampede® 4X4 VXL: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model 67086-4) Parts List
6884
Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/
bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8 (4)
6893
Input shaft (slipper shaft)/ bearing adapter (1)/pin (1)
5352R
Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum
(1)/ 4.0mm NL (1))
5352X
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/
2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
5552X
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/
4.0mm NL (1)/ 5.0mm NL (1))
2554
Screws, 3x6mm cap-head machi ne (hex drive) (6)
6878
Slipper clutch, complete
5556
Slipper pressure plate & hub (aluminum alloy)
5351
Slipper pressure plate and hub (alloy)
Spur Gears & Pinion Gears
6747
Gear, 11-T pinion (32-p) (steel)/ set screw
3942X
Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3943X
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3944X
Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3945X
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3946X
Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3947X
Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3948X
Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3949X
Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3950X
Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3951X
Gear, 21-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3952X
Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
6745
Gear, 9-T pinion (32-p) (steel)/ set screw
6842
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
6842R
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
(for center differential)
6843
Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)
6843R
Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)
(for center differential)
3956
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
3956R
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
(requires #6814 center differential)
3956X
Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32pitch) (requires #6780 center differential)
Steering Components
1552
Screws, 3x8mm cap-head machine (hex drive) (6)/washers (6)/
wrench
5114
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
6845A
Drag link, machined 6061-T6 aluminum (blue-anodized)
6845G
Drag link, machined 6061-T6 aluminum (green-anodized)
6845T
Drag link, machined 6061-T6 aluminum (orange-anodized)
6845R
Drag link, machined 6061-T6 aluminum (red-anodized)
6846
Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls
(2)
2742
Rod ends, long (6)/ hollow ball connectors (6)
6845X
Steering bellcranks/ servo saver/ servo saver spring/ servo spring
retainer/servo horn, steering
6742X
Toe links (TUBES blue-anodized, 7075-T6 aluminum, str onger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
6742G
Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
6742R
Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
2746
Washers, 3x6mm metal (12)
Suspension Linkage
3643X
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643G
Camber links, front (TUBES green-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643R
Camber links, front (TUBES red-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3644X
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum,
stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
3644G
Camber links, rear (TUBES green-anodized 7075-T6 aluminum,
stronger than
wrench (1) (#2579 3x15 BCS (4) required for installation)
3644R
Camber links, rear (TUBES red-anodized, 7075-T6 aluminum,
stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
5525
Rod ends (12)/ hollow balls (12)
6834
Suspension pin set, complete (front and rear)
2537
Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw
3644
Turnbuckles, camber link, 39mm (69mm center to center) (assembled
with rod ends and hollow balls) (1 left, 1 right) (fi ts front & rear on
Slash)
3643
Turnbuckles, camber link, 49mm (82mm center to center) (assembled
with rod ends and hollow balls) (1 left, 1 right)
5539
Turnbuckles, camber links, 58mm (assembled with rod ends and
hollow balls) (2)
Team Traxxas Items
2514
Decal sheet, racing sponsors
6160X
DVD, Maxx® Power! Full Throttle Action (sleeve)
9950
Official Team Traxxas® racing decal set (flag logo/ 6-color)
9909
Traxxas® racing banner, red & black (3x7 feet)
Tires & Wheels
5116
Ball bearings, blue rubber sealed (5x11x4mm) (2)
5854
Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X,
#6469)
3647
Nuts, 4mm flanged nylon locking (steel, serrated) (8)
1747R
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747G
Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1747P
Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4)
1985
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
1647
Silicone grease
2754
Stub axle pins (4)
4175
Tires & wheels, assembled, glued (2.8") (All-Star black chrome
wheels, paddle tires, foam inserts) (nitro rear/ 4WD electric
front/rear) (2) (TSM rated)
3669A
Tires & wheels, assembled, glued (2.8") (All-Star black chrome
wheels, Talon tires, foam inserts) (front/rear, Stampede 4x4) (2)
3669
Tires & wheels, assembled, glued (2.8") (All-Star chrome w heels,
Talon tires, foam inserts) (front/rear, Stampede 4x4) (2)
6792
Tires & wheels, assembled, glued (black 2.8" wheels,
Sledgehammer™ tir es, foam inserts) (2) (TSM® rated)
3671
Tires, Talon 2.8" (2)/ foam inserts (2)
1654
Wheel hubs, hex (rear) (2)/ stub axle pins (2)
6856X
Wheel hubs, splined, 17mm, short (4)/ wheel nuts, splined, 17mm
(4) (blue
wrench, 5mm
5353
Wheel nuts, splined, 17mm (blue-anodized) (4)
5480X
Wheel wrench, splined, 17mm
5576A
Wheels, All-Star 2.8" (black chrome) (front/rear, Stampede 4x4) (2)
5576
Wheels, All-Star 2.8" (chrome) (Stampede 4x4 front or rear) (2)
5572
Wheels, Twin-Spoke 2.8" (chrome) (front/rear, Stampede 4x4) (2)
Traxxas Tools
3433X
Body reamer (aluminum handle)
3433
Body reamer (plastic handle)
3436
Cap, body reamer
3432
Scissors, curved tip
3431
Scissors, straight tip
8712
Speed Bit Essentials Set, hex and nut driver, 7-piece, includes
premium handle (medium), travel pouch, hex drivers (straight:
1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm,
and 8.0mm), 1/4” drive
8721
Speed bit handle, medium (one piece)
8720
Speed bit handle, premium, large (rubber overmold)
8722
Speed bit handle, premium, medium (rubber overmold)
8710
Speed Bit Master Set, hex and nut driver, 13-piece, includes
premium handle (medium), travel pouch, hex drivers (straight:
1.5mm, 2.0mm,
3.0mm), and nut drivers (4.00mm, 4.50mm, 5.00mm, 5.50mm,
7.00mm, 8.00mm),
8711
Speed Bit Master Set, hex driver, 7-piece straight and ball end,
includes premium handle (medium), travel pouch, hex drivers
(straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm,
2.5mm, 3.0mm), 1/4" drive
8719
Speed Bit Master Set, nut driver, 6-piece, includes premium
handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm,
5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4" drive
8716
Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4"
drive
friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL
titanium) (73mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
-anodized)/ hub retainer M4 X 0.7 (4)/ axle pin (4)/
2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm,
REV. 210120 1419
Page 6
Page 6 Stampede® 4X4 VXL: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model 67086-4) Parts List
8716X
Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm,
3.0mm), 1/4" drive
8715
Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm,
2.5mm), 1/4" drive
8715X
Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm,
2.5mm, 3.0mm), 1/4" drive
3415
Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm,
driver handle
Turnbuckles & Threaded Rods
3643X
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643G
Camber links, front (TUBES green-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643R
Camber links, front (TUBES red-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3644X
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3644G
Camber links, rear (TUBES green-anodized 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
3644R
Camber links, rear (TUBES red-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
5525
Rod ends (12)/ hollow balls (12)
6742X
Toe links (TUBES blue-anodized, 7075-T6 aluminum, str onger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
6742G
Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
6742R
Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
3644
Turnbuckles, camber link, 39mm (69mm center to center) (assembled
Slash)
3643
Turnbuckles, camber link, 49mm (82mm center to center) (assembled
with rod ends and hollow balls) (1 left, 1 right)
5539
Turnbuckles, camber links, 58mm (assembled with rod ends and
hollow balls) (2)
If you have questions or need technical assistance, call Traxxas at:
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
For orders, calls outside the U.S., and other information, call 972-549-3000,
or fax to 972-549-3011 e -mail Traxxas at support@Traxxas.com
TRAXXAS.com
3.5mm, 4mm drivers/ 4mm, 5mm, 5.5mm, 7mm and 8mm nut
drivers/ 2mm, 4mm, and 5mm slotted screwdrivers/ #00 Phillips,
#0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrench/
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (73mm) (2)/ r od ends (4)/ aluminum
with rod ends and hollow balls) (1 left, 1 right) (fi ts front & rear on
REV. 210120 1419
Loading...