How it Works
Traxxas
Loading...
67014-4
Parts List
6 pgs729.6 Kb0

Traxxas 67014-4 Parts List

Download
Page 1
Stampede® 4X4 Unassembled Kit
Bearings & Bushings
Ball bearings (5x11x4mm) (8)
Ball bearings (10x15x4mm) (2)
Ball bearings (5x8x2.5mm) (2)
Ball bearings, blue rubber sealed (10x15x4mm) (2)
Ball bearings, blue rubber sealed (12x18x4mm) (2)
Ball bearings, blue rubber sealed (5x11x4mm) (2)
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
Ball bearings, blue rubber sealed (6x12x4mm) (2)
Ball bearings, blue rubber sealed (8x16x5mm) (2)
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Body & Accessories
Antenna caps, vinyl (2)/ antenna spool
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
Body clip (mounting clip), angled, 90-degrees (10)
Body clip (mounting clip), angled, 90-degrees (black) (10)
Body clips, heavy duty (12)
Body washers (8)
Body washers, foam , 2mm (4)/ 3mm (4)/ 4mm (4)
Body, Stampede® (clear, requires painting) (requires #3614 to mount)
Body, Stampede® 4X4 VXL, ProGraphix® (Graphics are printed, requires paint & final color application)/ decal sheet
Body, Stampede® 4X4, ProGraphix® (Graphics are printed, requires paint & final color application)/ decal sheet
Decal sheet, racing sponsors
Official Team Traxxas® racing decal set (flag logo/ 6-color)
Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
Wheelie bar mounts/ rear skidplate (black)
Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)
Center Driveline
Ball bearings, black rubber sealed (10x15x4mm) (2)
Ball bearings, blue rubber sealed (12x18x4mm) (2)
Ball bearings, blue rubber sealed (5x11x4mm) (2)
Ball bearings, blue rubber sealed (6x12x4mm) (2)
Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/
shaft)
Bearing adapter, 6160-T6 aluminum (blue-anodized)
shaft)
Cover, center driveshaft (clear)
Cover, gear (clear)
Cover, gear/ motor wire hold-down clip
Differential kit, center (complete)
Drive hub, center, rear (1)/ 4x3 GS (1)
Drive hub, front, hardened steel (1)/ screw pin (1)
Driveshaft, center, 6061-T6 aluminum (blue-anodized)
Driveshaft, center, 6061-T6 aluminum (green-anodized)
Driveshaft, center, 6061-T6 aluminum (red-anodiz ed)
Driveshaft, center, plastic (blue)/ screw pin
Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft)
Grease, white lithium
Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8 (4)
Input shaft (slipper shaft)/ bearing adapter (1)/pi n (1)
Plate, motor
Plate, motor, 6061-T6 aluminum (blue-anodized)
Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum
(1)/ 4.0mm NL (1))
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))
Screws, 3x6mm button-head machine (hex drive) (6)
Screws, 3x6mm cap-head machine (hex drive) (6)
Screws, 3x6mm flat-head machine (hex drive) (6)
Silicone grease
Slipper clutch, complete
Slipper pressure plate & hub (aluminum alloy)
Slipper pressure plate and hub (alloy)
Chassis & Attachments
Body mount (1)/ body mount post (2) (front)
Body mount (1)/ body mount post (2)/ body post extensions (2) (front or rear)
Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)
Bumper, front/ skidplate, front (black)
Chassis
Hold down, battery (2)/ hold down retainer/ battery post/ angled body clip
Hold down, battery/ hold down retainer/ batter y post/ angled body clip (allows for installation of taller, multi-cell batteries)
Seal kit, receiver box (includes o-ring, seals, and silicone grease)
Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
Wheelie bar mounts/ rear skidplate (black)
Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)
Differential Components
Ball bearings, blue rubber sealed (10x15x4mm) (2)
Ball bearings, blue rubber sealed (6x12x4mm) (2)
Ball bearings, blue rubber sealed (8x16x5mm) (2)
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW
Differential kit, center (complete)
Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)
Housings, differential, front
Housings, differential, rear
Ring gear, differential/ pinion gear, differential
Ring gear, differential/ pinion gear, differential (12/47 ratio) (front)
Ring gear, differential/ pinion gear, differential (12/47 ratio) (rear)
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear)
Ring gear, differential/ pinion gear, differential (rear)
Screws, 2.5x8mm cap-head machine (6)
Silicone grease
Driveline Components
Axle carriers, rear, 6061-T6 aluminum, left & right (blue­anodized) (Compatible only when installing #6451 & #6452 steel constant-ve locity drives hafts)
Ball bearings, blue rubber sealed (10x15x4mm) (2)
Ball bearings, blue rubber sealed (5x11x4mm) (2)
Ball bearings, blue rubber sealed (6x12x4mm) (2) (Compatible only when installing #6451 & #6452 steel constant driveshafts)
Cross pin (2)/ drive pin (2) (repairs 1 axle shaft)
Differential output shafts, steel-splined constant-velocity (2)
Differential output yokes, heavy duty (2)/ screw pin (2)
Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Driveshafts, front, steel-spline constant-velocity (complete assembly) (2)
Driveshafts, front, steel-spline constant-velocity (complete assembly) (2)
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
Half shaft, external splined (steel-spline constant velocity) (1)
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.
(Model 67014-4) Parts List
10x15x4mm ball bearing (black rubber sealed) (1) (for slipper
(1)/10x15x4mm ball bearing (blue rubber sealed) (1) (for slipper
friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL
For assistance, call 1-888-TRAXXAS, or e-mail Traxxas anytime at support@Traxxas.com REV. 210120 1408
-velocity
Page 2
Page 2 Stampede® 4X4 Unassembled Kit (Model 67014-4) Parts List
Half shaft, external splined (steel-spline constant-velocity) (1)
Half shaft, internal splined (steel-spline constant velocity) (1)
Half shaft, internal splined (steel-spline constant-velocity) (1)
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)
Rebuild kit, steel-splined constant-velocity driveshafts (includes pins and hardware for one axle shaft)
Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware)
Steering blocks, 6061-T6 aluminum, left & right (blue-anodized)
velocity driveshafts)
Stub axle, front, 5mm (steel-splined constant-velocit y driveshaft) (1)
Stub axle, front, steel-splined constant velocity (1)
Stub axle, rear, 5mm (steel-splined constant-velocity driveshaft) (1)
Stub axle, rear, steel-splined constant velocity (1)
Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)
Stub axles, rear, heavy duty (2)/pins (2)
Wheel adaptors, 12mm hex, 6061-T6 aluminum (blue-anodized)
#6451 (x2), #6452 (x2), #6439, #6455, #5117 (x3))
Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(4)
Front Suspension & Steering
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
Bulkhead tie bars, front & rear, aluminum (blue-anodized)
Bulkhead tie bars, front & rear, aluminum (green-anodized)
Bulkhead tie bars, front & rear, aluminum (red-anodized)
Camber link set (plastic / non-adjustable ) ( front & rear) (grey)
Camber link set (plastic/ non-adjustable) (front & rear) (black)
Camber links, fr ont (TUBES blue-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, front (TUBES green-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, front (TUBES red-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), left & right
Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right
Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & right
Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left & right
Caster blocks (c-hubs), left & right
Drag link, machined 6061-T6 aluminum (blue-anodized)
Drag link, machined 6061-T6 aluminum (green-anodized)
Drag link, machined 6061-T6 aluminum (orange-anodized)
Drag link, machined 6061-T6 aluminum (red-anodized)
Linkage, front sway bar (2) (assembled with rod ends, hollow balls and ball studs)
Linkage, rear sway bar (2) (assembled with rod ends, hollow balls and ball studs)
Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2)
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
Rod ends, long (6)/ hollow ball connectors (6)
Screws, 3x15mm flat-head machine (hex drive) (6)
Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
Shock tower, front
Shock tower, front, 7075-T6 aluminum (blue-anodized)
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering
Steering blocks, 6061-T6 aluminum (blue-anodized), left & right
Steering blocks, 6061-T6 aluminum (green-anodized), left & right
Steering blocks, 6061-T6 aluminum (orange-anodized), left & right
Steering blocks, 6061-T6 aluminum (red-anodized), left & right
Steering blocks, left & right
Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)
Suspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)
Suspension arms, blue, front/rear (left & right), heavy duty (2)
Suspension arms, front/rear (left & right), heavy duty (2)
Suspension arms, green, front/rear (left & right), heavy duty (2)
Suspension arms, l eft & right
Suspension arms, orange, front/rear (left & right), heavy duty (2)
Suspension arms, red, fr ont/rear (left & right), heavy duty (2)
Suspension arms, white, front/rear (left & right), heavy duty (2)
Suspension pin set, complete (front and rear)
Sway bar kit (front and rear) (includes front and rear sway bars and adjustable linkage)
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
Wires, sway bar (front & rear, hard & soft) / 3x6 FCS (4)
Hardware
Antenna caps, vinyl (2)/ antenna spool
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
Attachment screws, shock (3x12mm shoulder screws) (6)
Screws, 3x8mm cap-head machine (hex drive) (6)/washers (6)/ wrench
Body clip (mounting clip), angled, 90-degrees (10)
Body clip (mounting clip), angled, 90-degrees (black) (10)
Body clips, heavy duty (12)
Double-sided adhesive tape (25mm x 25mm) (2)
Screws, 3x15mm cap-head machine (hex drive) (6)
Nuts, 3mm nylon locking (12)
Nuts, 4mm flanged nylon locking (steel, serrated) (8)
Nuts, 4mm nylon locking (10)
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4)
Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Rod ends (12)/ hollow balls (12)
Rod ends, short (6)/ hollow balls (6)
Screws, 2.5x5mm button-head machine (hex drive) (6)
Screws, 2.5x6mm cap-head machine (hex drive) (6)
Screws, 2.5x8mm cap-head machine (6)
Screws, 3x10mm button-head machine (hex drive) (6)
Screws, 3x12mm button-head machine (hex drive) (6)
Screws, 3x12mm countersunk machi ne (6) (hex drive)
Screws, 3x15mm button-head machine (hex drive) (6)
Screws, 3x15mm flat-head machine (hex drive) (6)
Screws, 3x18mm button-head machine (hex drive) (6)
Screws, 3x20mm button-head machine (hex drive) (6)
Screws, 3x23mm button-head machine (hex drive) (6)
Screws, 3x30mm button-head machine (hex drive) (6)
Screws, 3x40mm button-head machine (hex drive) (6)
Screws, 3x6mm button-head machine (hex drive) (6)
Screws, 3x6mm cap-head machine (hex drive) (6)
Screws, 3x6mm countersunk machine (6) (hex drive)
Screws, 3x6mm flat-head machine (hex drive) (6)
Screws, 3x8mm button-head machine (hex drive) (6)
Screws, 3x8mm flat-head machine (hex drive) (6)
Screws, 4x12mm button-head machine (hex drive) (6)
Screws, 4x12mm countersunk machi ne (hex drive) (6)
Screws, 4x15mm countersunk machi ne (hex drive) (6)
Set (grub) screws, 3mm hardened (12)
Shoulder screws, Ultra Shocks (3x12 hex drive) (6)
Stub axle pins (4)
Washers, 3x6mm metal (12)
LED Lights
LED light bar (chrome, 4 clear lights)
Motors & Electronics
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
BEC assembly (complete)
Gear set (for 2070, 2075 servos)
Gear set, metal (for 2070, 2075 servos)
Gear set, metal (for 2250, 2255 servos)
Gear set, metal, high speed (for 2070, 2075 servos)
Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)
Motor mount, 6061-T6 aluminum (blue-anodized)
Motor, Titan® 12T (12-Turn, 550 size)
Motor, Velineon® 3500, brushless (assembled with 12-gauge wire and gold-plated bullet connectors)
Screws, 2.5x5mm button-head machine (hex drive) (6)
Screws, 3x6mm flat-head machine (hex drive) (6)
Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
Servo case, aluminum (red-anodized) (middle) (for 2255 ser vo)
(Compatible only when installing #6451 & #6452 steel constant-
(4)/ screw pins (4)/ drill bit, 0.25 inch (for 6mm shafts) (requires
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
REV. 210120 1408
Page 3
Page 3 Stampede® 4X4 Unassembled Kit (Model 67014-4) Parts List
Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos)
Servo case/gaskets (for 2056 and 2075 waterproof servos)
Servo gears (for 2055, 2056 servos)
Servo, digital high-speed, metal gear (ball bearing), waterproof
Servo, digital high-torque (ball bearing), waterproof
Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof
Servo, digital high-torque, metal gear (ball bearing), waterproof
Servo, high-torque, waterproof (blue case)
Velineon® VXL-3s Brushless Power System, waterproof
speed control mounting plate (part #3725R))
Velineon® VXL-3s Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)
XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)
Radio System, Batteries & Chargers
5000mAh 7.4v 2-Cell 25C LiPo Battery
5800mAh 7.4v 2-Cell 25C LiPo Battery
AC to DC converter, 40W
Adapter, Traxxas® iD® LiPo battery (adapts Traxxas iD batteries to separate balance ports)
Battery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
Battery, Power Cell AA Alkaline (4)
Battery, Power Cell, 3000mAh (NiMH, 7-C hump, 8.4V)
Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C hump, 8.4V)
Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C hump, 8.4V)
Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C hump, 8.4V)
Battery/charger completer pack (includes #2969 2-amp NiMH
NiMH
battery (1))
Battery/charger completer pack (includes #2970 iD® charger (1), #2843X 5800mAh 7.4V 2-cell 25C LiPo battery (1))
BEC assembly (complete)
Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH)
Charger, EZ-Peak® Dual, 100W, NiMH/LiPo with iD® Auto Battery Identification
Charger, EZ-Peak® Live Dual, 200W, NiMH/LiPo with iD® Auto Battery Identification
Charger, EZ-Peak® Live, 100W, NiMH/LiPo with iD® Auto Batter y Identification
Charger, EZ-Peak® Plus, 4 amp, NiM H/LiPo with iD® Auto Battery Identification
Communication link, telemetry expander
Fuse, charger, 5A (2) (for #2974, 2975, 2977)
Gear set (for 2070, 2075 servos)
Gear set, metal (for 2070, 2075 servos)
Gear set, metal (for 2250, 2255 servos)
Gear set, metal, high speed (for 2070, 2075 servos)
LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries)
LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries)
Mount, telemetry expander (fits Slash 4X4, Stampede® 4X4, Rally, Jato®)
Mount, temperature sensor (electric motors)/ wire tie/ thermal pad
Receiver, micro, TQ 2.4GHz (3-channel)
Screws, 3x6mm flat-head machine (hex drive) (6)
Seal kit, expander box (includes o-ring, seals, and silicone grease)
Sensor, auto-detectable, temperature
Sensor, auto-detectable, voltage
Sensor, RPM (long)/ 3x4mm BCS (2)/ 3x4 GS (1)
Sensor, temperature and voltage (long)
Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
Servo case, aluminum (red-anodized) (middle) (for 2255 servo)
Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos)
Servo case/gaskets (for 2056 and 2075 waterproof servos)
Servo gears (for 2055, 2056 servos)
Servo, digital high-speed, metal gear (ball bearing), waterproof
Servo, digital high-torque (ball bearing), waterproof
Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof
Servo, digital high-torque, metal gear (ball bearing), waterproof
Servo, high-torque, waterproof (blue case)
Telemetry expander 2.0 and GPS m odule 2.0, TQi radio system
Telemetry expander 2.0, TQi radio system (for use only with #6551X GPS module)
Telemetry GPS module 2.0, TQi radio system (for use only with #6550X telemetry expander)
Telemetry trigger magnet holder, center differential/ magnet, 5x2mm (1)/ 3x8mm BCS (3) (for use with #6814 center differential)
Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3)
Telemetry trigger magnet, 5X2mm (1)
TQi 2.4 GHz High Output radio system, 2-channel, Traxxas Link™ enabled, TSM (2-ch transmitter, 5-ch micro receiver)
TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link™ W receiver)
Transmitter, TQ 2.4GHz, 2-channel (transmitter only)
Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 2­channel (transmitter only)
Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 3­channel (transmitter only)
Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 4­channel (transmitter only)
Traxxas Link™ Wireless Module
Rear Suspension
Bulkhead tie bars, front & rear, aluminum (blue-anodized)
Bulkhead tie bars, front & rear, aluminum (green-anodized)
Bulkhead tie bars, front & rear, aluminum (red-anodized)
Bulkhead, rear
Camber link set (plastic / non-adjustable ) ( front & rear) (grey)
Camber link set (plastic/ non-adjustable) (front & rear) (black)
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, rear (TUBES green-anodized 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than tita wrench (1) (#2579 3x15 BCS (4) required for installation)
Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (2)
Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (2)
Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (2)
Carriers, stub axle (rear) (2)
Carriers, stub axle (red-anodized 6061-T6 aluminum) (rear) (2)
Linkage, front sway bar (2) (assembled with rod ends, hollow balls and ball studs)
Linkage, rear sway bar (2) (assembled with rod ends, hollow balls and ball studs)
Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
Shock tower, rear
Shock tower, rear, 7075-T6 aluminum (blue-anodized)
Stub axles, rear, heavy duty (2)/pins (2)
Suspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)
Suspension arms, blue, front/rear (left & right), heavy duty (2)
Suspension arms, front/rear (left & right), heavy duty (2)
Suspension arms, green, front/rear (left & right), heavy duty (2)
Suspension arms, l eft & right
Suspension arms, orange, front/rear (left & right), heavy duty (2)
Suspension arms, red, fr ont/rear (left & right), heavy duty (2)
Suspension arms, white, front/rear (left & right), heavy duty (2)
Suspension pin set, complete (front and rear)
Sway bar kit (front and rear) (includes front and rear sway bars and adjustable linkage)
Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Wires, sway bar (front & rear, hard & soft) / 3x6 FCS (4)
Shock Oil
Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
Shock oil bottle (60cc) (for mixing shock oil)
(includes VXL-3s waterproof ESC, V elineon 3500 motor, and
ireless Module, TSM (4-ch transmitter, 5-ch micro
peak detecting AC charger (1), #2926X 3000mAh 8.4V 7-cell
nium) (73mm) (2)/ rod ends (4)/ aluminum
REV. 210120 1408
Page 4
Page 4 Stampede® 4X4 Unassembled Kit (Model 67014-4) Parts List
Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack)
Silicone shock oil (30 wt), 60cc
Spinning carousel rack
Shocks (GTR)
Body, GTR long (hard-anodized, PTFE-coated aluminum) (1)
Body, GTR long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1)
Body, GTR long shock, aluminum (green-anodized) (PTFE­coated bodies) (1)
Body, GTR long shock, aluminum (orange-anodized) (PTFE­coated bodies) (1)
Body, GTR xx-long (hard-anodized, PTFE-coated aluminum) (1)
Body, GTR xx-long shock, aluminum (blue-anodized) (PTFE­coated bodies) (1)
Body, GTR xx-long shock, aluminum (green-anodized) (PTFE­coated bodies) (1)
Body, GTR xx-long shock, aluminum (orange-anodized) (PTFE­coated bodies) (1)
Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
Caps and spring retainers, GTR long/xx-long shock (upper cap
retainer (2))
Multi-tool (plastic)
Nuts, 2.5mm nylon locking (12)
Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks)
Rod ends (GTR shocks) (6)
Shaft, GTR long, TiN-coated (2)
Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)
Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)
Shocks, GTR long hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)
Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)
Shocks, GTR xx-long hard-anodiz ed, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
Spring retainers, lower (captured) (4)/ 2.5x10 CS (4)
Spring, shock, white (GTR long) (0.623 rate orange) (1 pair)
Spring, shock, white (GTR long) (0.653 rate green) (1 pair)
Spring, shock, white (GTR long) (0.767 rate black) (1 pair)
Spring, shock, white (GTR long) (0.810 rate pink) (1 pair)
Spring, shock, white (GTR long) (0.892 rate blue) (1 pair)
Spring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair)
Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair)
Spring, shock, white (GTR xx-long) (0.874 rate black) (1 pair)
Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair)
Spring, shock, white (GTR xx-long) (1.004 rate blue) (1 pair)
Shocks (Pro-level Aluminum)
Big Bore shock cylinder (long) (1)
Big Bore shock cylinder (XX-long) (1)
Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4)
Big Bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (front) (2)
Big Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
Rebuild kit, Ultra shocks (for 2 shocks)
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)
Rod ends, short (6)/ hollow balls (6)
Shock caps, aluminum (Big Bore Shocks) (2)
Shock shafts, hardened steel, titanium nitride coated (long) (2)
Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)
Shock shafts, steel, chrome finish (long) (2)
Shock shafts, steel, chrome finish (xx-long) (2)
Silicone diaphragms (4)
Spring retainers, upper & lower (2)/ spring pre-load spacers:
Shocks)
Springs, front (progressive, +10% rate, pink) (2)
Springs, front (progressive, +20% rate, blue) (2)
Springs, front (progressive, -10% rate, green) (2)
Springs, front (progressive, -20% rate, orange) (2)
Springs, front (white) (progressive rate) (2)
Springs, front (white) (progressive rate) (2) (fits #5862 aluminum Big Bore shocks)
Springs, rear (progressive, +10% rate, pink) (2)
Springs, rear (progressive, +20% rate, blue) (2)
Springs, rear (progressive, -10% rate, green) (2)
Springs, rear (progressive, -20% rate, orange) (2)
Springs, rear (white) (progressive rate) (2)
Springs, rear (white) (progressive rate) (2) (fits #5862 aluminum Big Bore shocks)
Shocks (Ultra Shocks)
Attachment screws, shock (3x12mm shoulder screws) (6)
Body, Ultra Shock(s) (long) (grey) (2)
Body, Ultra Shock(s) (XXL) (grey) (2)
Rebuild kit, Ultra shocks (for 2 shocks)
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)
Rod ends, short (6)/ hollow balls (6)
Shock caps (2)/ shock bottoms (2)
Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)
Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)
Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
Shock shafts, hardened steel, titanium nitride coated (long) (2)
Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)
Shock shafts, steel, chrome finish (long) (2)
Shock shafts, steel, chrome finish (xx-long) (2)
Silicone diaphragms (4)
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)
Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))
Springs, front (black) (2)
Springs, front (blue) (2)
Springs, front (green) (2)
Springs, front (pink) (2)
Springs, front (progressive, +10% rate, pink) (2)
Springs, front (progressive, +20% rate, blue) (2)
Springs, front (progressive, -10% rate, green) (2)
Springs, front (progressive, -20% rate, orange) (2)
Springs, front (white) (2)
Springs, front (white) (progressive rate) (2)
Springs, rear (black) (2)
Springs, rear (blue) (2)
Springs, rear (green) (2)
Springs, rear (pink) (2)
Springs, rear (progressive, +10% rate, pink) (2)
Springs, rear (progressive, +20% rate, blue) (2)
Springs, rear (progressive, -10% rate, green) (2)
Springs, rear (progressive, -20% rate, orange) (2)
Springs, rear (white) (2)
Springs, rear (white) (progressive rate) (2)
Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2)
Ultra Shocks (black) (long) (complete w/ spring pre-load spacers & springs) (front) (2)
Ultra Shocks (black) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2)
Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
Slipper Clutch Components
Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)
Bearing adapter, 6160-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (blue rubber sealed) (1) (for slipper shaft)
Differential kit, center (complete)
Drive hub, center, rear (1)/ 4x3 GS (1)
Drive hub, front, hardened steel (1)/ screw pin (1)
Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft)
Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8 (4)
Input shaft (slipper shaft)/ bearing adapter (1)/pi n (1)
Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pad (1)/ 4.0mm NL (1))
(2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower
1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore
s (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL
REV. 210120 1408
Page 5
Page 5 Stampede® 4X4 Unassembled Kit (Model 67014-4) Parts List
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))
Screws, 3x6mm cap-head machine (hex drive) (6)
Slipper clutch, complete
Slipper pressure plate & hub (aluminum alloy)
Slipper pressure plate and hub (alloy)
Spur Gears & Pinion Gears
Gear, 11-T pinion (32-p) (steel)/ set screw
Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 14-T pinion (32-p), heavy dut y (machined, hardened steel)/ set screw
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 21-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
Gear, 9-T pinion (32-p) (steel)/ set screw
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)
Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)
Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (requires #6814 center differential)
Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32­pitch) (requires #6780 center differential)
Steering Components
Screws, 3x8mm cap-head machine (hex drive) (6)/washers (6)/ wrench
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
Drag link, machined 6061-T6 aluminum (blue-anodized)
Drag link, machined 6061-T6 aluminum (green-anodized)
Drag link, machined 6061-T6 aluminum (orange-anodized)
Drag link, machined 6061-T6 aluminum (red-anodized)
Gear set (for 2070, 2075 servos)
Gear set, metal (for 2070, 2075 servos)
Gear set, metal, high speed (for 2070, 2075 servos)
Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2)
Rod ends, long (6)/ hollow ball connectors (6)
Servo case/gaskets (for 2056 and 2075 waterproof servos)
Servo gears (for 2055, 2056 servos)
Servo, digital high-speed, metal gear (ball bearing), waterproof
Servo, digital high-torque (ball bearing), waterproof
Servo, digital high-torque, metal gear (ball bearing), waterproof
Servo, high-torque, waterproof (blue case)
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering
Washers, 3x6mm metal (12)
Suspension Linkage
Camber link set (plastic / non-adjustable ) ( front & rear) (grey)
Camber link set (plastic/ non-adjustable) (front & rear) (black)
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, front (TUBES green-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, front (TUBES red-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, rear (TUBES green-anodized 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2) wrench (1) (#2579 3x15 BCS (4) required for installation)
Rod ends (12)/ hollow balls (12)
Suspension pin set, complete (front and rear)
Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw
Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
Team Traxxas Items
Decal sheet, racing sponsors
DVD, Maxx® Power! Full Throttle Action (sleeve)
Official Team Traxxas® racing decal set (flag logo/ 6-color)
Traxxas® racing banner, red & black (3x7 feet)
Tires & Wheels
Ball bearings, blue rubber sealed (5x11x4mm) (2)
Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469)
Nuts, 4mm flanged nylon locking (steel, serrated) (8)
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4)
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Silicone grease
Stub axle pins (4)
Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, paddle tires, foam inserts) (nitro rear/ 4WD electric front/rear) (2) (TSM rated)
Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, Talon tires, foam inserts) (front/rear, Stampede 4x4) (2)
Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Talon tires, foam inserts) (front/rear, Stampede 4x4) (2)
Tires & wheels, assembled, glued (black 2.8" wheels, Sledgehammer™ tir es, foam inserts) (2) (TSM® rated)
Tires and wheels, assembled, glued 2.8" (All-Star chrome wheels, Maxx® tires, foam inserts) (2)
Tires, Maxx® 2.8" (2)/ foam inserts (2)
Tires, Talon 2.8" (2)/ foam inserts (2)
Wheel hubs, hex (rear) (2)/ stub axle pins (2)
Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(4)
Wheel hubs, splined, 17mm, short (4)/ wheel nuts, splined, 17mm (4) (blue wrench, 5mm
Wheel nuts, splined, 17mm (blue-anodized) (4)
Wheel wrench, splined, 17mm
Wheels, All-Star 2.8" (black chrome) (front/rear, Stampede 4x4) (2)
Wheels, All-Star 2.8" (chrome) (Stampede 4x4 front or rear) (2)
Wheels, Twin-Spoke 2.8" (chrome) (front/rear, Stampede 4x4) (2)
Traxxas Tools
Body reamer (aluminum handle)
Body reamer (plastic handle)
Cap, body reamer
Scissors, curved tip
Scissors, straight tip
Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight:
1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4” drive
Speed bit handle, medium (one piece)
Speed bit handle, premium, large (rubber overmold)
Speed bit handle, premium, medium (rubber overmold)
Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (str
1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball
3.0mm), and nut drivers (4.00mm, 4.50mm, 5.00mm, 5.50mm,
7.00mm, 8.00mm),
Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, h (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm,
2.5mm, 3.0mm), 1/4" drive
/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
-anodized)/ hub retainer M4 X 0.7 (4)/ axle pin (4)/
aight:
-end: 2.0mm, 2.5mm,
ex drivers
REV. 210120 1408
Page 6
Page 6 Stampede® 4X4 Unassembled Kit (Model 67014-4) Parts List
Speed Bit Master Set, nut driver, 6-piece, includes premium
5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4" drive
Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4" drive
Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm,
3.0mm), 1/4" drive
Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm,
2.5mm), 1/4" drive
Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm,
2.5mm, 3.0mm), 1/4" drive
Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm,
driver handle
Turnbuckles & Threaded Rods
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, front (TUBES green-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, fr ont (TUBES red-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, rear (TUBES green-anodized 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Camber links, rear (TUBES red-anodized, 7075-T6 aluminum,
wrench (1) (#2579 3x15 BCS (4) required for installation)
Rod ends (12)/ hollow balls (12)
Turnbuckles, cam ber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
If you have questions or need technical assistance, call Traxxas at:
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
For orders, calls outside the U.S., and other information, call 972-549-3000,
or fax to 972-549-3011 e -mail Traxxas at support@Traxxas.com
TRAXXAS.com
handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm,
3.5mm, 4mm drivers/ 4mm, 5mm, 5.5mm, 7mm and 8mm nut drivers/ 2mm, 4mm, and 5mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrench/
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum
stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum
REV. 210120 1408
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use