Performance
Climate Changer
Next generation air handler from Trane
™
Trane Performance Climate
Changer™ Air Handler
• Two-inch, R-13 foam-injected panels with
mid-span, internal thermal breaks and
standard thermal break access doors. The
no-through-metal design delivers thermal
performance that helps ensure condensation
will not form on the casing exterior, even with
55°F supply air temperature and unit external
conditions of 81°F dry bulb and 73°F wet
bulb.
• Filter technology that exceeds LEED
requirements and reduces pressure drops
up to 50 percent versus previous designs.
Trane has a history of combining customer needs,
engineering expertise, advanced technology and
cutting-edge innovation to provide superior
products that deliver exceptional performance.
The next generation of Trane air handlers
continues this tradition.
Superior performance
The Performance air handler has the tightest
casing in the commercial ARI market, meeting an
ASHRAE 111 Class 6 leakage level. This leakage
rate is better than most custom designs. Superior
performance features include:
• Low-leak casing design that achieves less than
1.0 percent leakage rate and can withstand
+/- 8 inches w.g. static pressure, with no more
than 0.0042 inch deflection.
Energy ecient
Trane has designed even the most basic
features to encourage energy conservation,
allowing the system to surpass minimum
ASHRAE Standard 90.1 requirements.
The Performance air handler delivers:
• Superior performance
• Industry-leading energy efficiency
• System optimization
• Highest quality
• Lowest installed cost
2 Trane Peformance Climate Changer™ Air Handler
Energy ecient components include:
System optimization
• Positional service lights with light emitting
diode (LED) fixtures, which last up to ten
times longer than fluorescent bulbs and one
hundred times longer than incandescent bulbs,
while using only 2–10 watts of electricity.
• Traq™ dampers, an AMCA 611-certified
airflow monitoring solution with standard
and low-flow options, which allow direct
measurement and control of outdoor and
return airflow. The low-flow Traq damper is
a key part of a demand control ventilation
strategy to help drive down energy costs.
• High-eciency coil fins deliver superior
heat-transfer eciency while allowing face
velocities in excess of 625 fpm without
moisture carryover.
• Discharge plenums and plenum fan sections,
which are available with variable size, type and
location of openings, to reduce static pressure
loss and lower energy consumption.
The Trane EarthWise™ design philosophy
incorporates high-eciency air handlers and
water chillers with low-flow rates and low
temperatures on both the waterside and airside.
Benefits include:
• Reduced emissions
• Lower first cost
• Lower operating cost
• Improved acoustical performance
• Smaller equipment and components
• Better comfort with lower space humidity
Low-temperature, low-flow systems can be
challenging, but the Performance air handler is
engineered to capitalize on the benefits of an
EarthWise system:
• Low-leak casing design incorporates foam-
injected and mid-span internal thermal break
panels and standard thermal break access
doors to minimize condensation from low-
leaving air temperatures.
The Trane EarthWise™
design philosophy
incorporates high
efficiency air handlers
and water chillers with
low flow rates and low
temperatures
on both the waterside
and airside.
3
System Optimization, continued
In addition to the
obvious energy
savings, moving less
air reduces the size
of air handlers and
ductwork. This can
result in a quieter
unit and a smaller
mechanical room,
leaving more space
for tenants. In
addition, the colder
air lowers building
dew point, improving
building humidity
control and indoor air
quality.
• Factory-engineered, -mounted, and -tested
controls ensure that sensors and sequences
deliver optimal operating eciencies and that
casing openings have been properly sealed.
• Numerous coil types and high-eciency coil
fin technology enables the latest in airside
heat transfer, which improves overall system
eciency by lowering the coil approach
temperature and reducing the chance of
moisture carryover.
• The ability to choose the exact number of fins
per foot of coil surface allows heat transfer
and air pressure performance to be tuned to
specific application requirements.
• A wide array of fan options provides optimal
sound and eciency choices for
the application.
• The latest controls technology easily
incorporates fan pressurization and/or
demand control ventilation strategies to
further enhance the system.
EarthWise design provides many benefits—
both for the environment, and for business.
Few building design and construction strategies
can oer a solution as complete as the
EarthWise system.
High quality
Trane has a long-term commitment to quality
and manufacturing excellence ensuring our
customers receive a reliable unit with proven
and tested dependability. The innovative new
Performance air handler—ARI Standard 430–
certified—will provide optimal, energy-ecient
comfort for decades to come.
Exceptional quality is built into every component
of the new Performance air handler. Formulated
panels and an integral base frame minimize
the number of seams that could introduce air
leak paths. All Trane coils are ARI Standard
410-certified and tested at one-and-a-half times
the maximum operating pressure. In addition,
all Trane fans are dynamically balanced in the
horizontal and vertical planes. Fans with variable
frequency drives also undergo inverter balancing
at peak airflow and at all operating points on the
system curve. Experienced technicians factory-
mount and –wire controls using standard control
point locations so that each unit is wired the same
way, every time, making check out and servicing
quicker and easier.
4 Trane Peformance Climate Changer™ Air Handler
a
b
d
c
e
Performance Climate Changer features:
f
g
h
a
Low casing air leakage: ASHRAE Standard 111 Class 6
leakage level achieves less than one percent leakage rate
b
Discharge plenum sections: Minimize air pressure drop by
transforming sections to the most ecient opening sizes,
types and locations
c
Fan sections: Twice the fan flexibility and an average
3–5 percentage points more ecient than previous Climate
Changer™ air handler designs
d
Single-point power and quick connect wiring: Factory
wiring minimizes installation costs and provides wiring
integrity between sections
e
Coil sections: More coil options with industry-leading low
pressure drop fin designs and infinitely variable fin spacing
to exactly match capacity requirements
f
Thermal-break casing panels and doors: Two-inch R-13
foam-injected casing panels and doors with thermal breaks
minimize heat transfer and withstand +/– 8-inches w.g.
pressure with no more than 0.0042 inches deflection
g
Filter sections: Filter technology that exceeds LEED
requirements and reduces pressure drops up to 50 percent
versus previous designs
h
Mixing sections: New AMCA 611-certified Traq technology
capable of accurately measuring lower flow for demand
control ventilation applications
5
Lowest installed cost
The Performance air handler includes many
features designed to reduce installation time
and cost:
• Liing lugs are included on the integral base
frame; and all units ship with a skid designed
for forkli transport.
• LED service lights are factory wired to an
external factory-provided Service Module,
which includes a switch and GFCI receptacle.
• Quick-connect wiring minimizes installation
costs and provides wiring integrity between
sections without having to identify or
check continuity.
• Discharge plenums are available with variable
height, size, type and location of openings,
which minimizes the need for duct transitions
by the installing contractor.
• Factory-installed interoperable controls
shorten construction cycles, simplify job
site coordination, reduce installation time
and expense, and provide single-source
responsibility for warranty and service issues.
• Single-point power is available with a
high-voltage distribution block and
external main unit disconnect with
lockout/tagout capabilities.
• Factory-installed conduit connectors
eliminate penetrations in the wrong location,
and all electrical casing penetrations and coil
connections are properly sealed at the factory.
• NEMA 4 external motor junction box and
motor conduit is available. Motor leads are
run through flexible metal conduit to the
external junction box, and penetrations
are properly sealed.
Trane consistently
delivers the best
HVAC solution for
your buildings.
6 Trane Peformance Climate Changer™ Air Handler
Trane analysis
and design tools
Trane has comprehensive analysis and design
soware tools to provide whole building
analysis, acoustical design guidance, equipment
performance data, suggested control strategies,
and more. Talk with your local Trane sales
Trane Climate Changer Configurator (CCC)
software evaluates air handler design
alternatives such as split dehumidification
units, energy wheels, and CDQ™ desiccant
dehumidification systems for energy
efficiency and humidity control
engineer to learn how these tools will help
achieve an energy-ecient system design
that provides optimal IAQ, and stays within
the project budget.
Trane Air Conditioning Economics
(TRACE™) optimizes and compares the
design of virtually any building’s HVAC
system based on energy utilization and
lifecycle cost, factoring in construction,
orientation and size.
Trane Controls Pre-Packaged Solutions
(PPS) quickly lays out and optimizes
control strategies for superior equipment
and system performance.
Trane Official Product Selection System
(TOPSS™) selects and calculates performance
of Trane equipment.
Trane Acoustics Program (TAP™) accurately
predicts and compares system sound levels.
7
Trane Expertise
The innovative Performance air handler was
developed by the trusted leader in the industry:
Trane. For superior performance, industry
leading energy e ciency, system optimization,
the highest quality and the lowest installed
cost, the right choice is the Trane Performance
Climate Changer air handler.
Trane is a pioneer in the HVAC industry and
has consistently led the industry in providing
solutions for its ever changing needs. With a
portfolio of proven equipment and controls,
systems-focused solutions, leading industry
experts, and highly trained sales engineers,
Trane has the experience and expertise to design,
manufacture, install and service an HVAC system
that will meet your environmental, business
and building performance goals.
Ingersoll Rand (NYSE:IR) is a world leader in creating and sustaining safe, comfortable and e cient environments in commercial, residential and
industrial markets. Our people and our family of brands—including Club Car®, Hussmann®, Ingersoll Rand®, Schlage®, Thermo King® and Trane®—
work together to enhance the quality and comfort of air in homes and buildings, transport and protect food and perishables, secure homes and
commercial properties, and increase industrial productivity and e ciency. We are a $13 billion global business committed to sustainable business
practices within our company and for our customers.
© 2010 Trane All rights reserved
CLCH-SLB017-EN October 14, 2010 ingersollrand.com
Produced on post-consumer recycled paper, using
environmentally friendly print practices that reduce waste.
Loading...