Traeger Bbq150 Owner's Manual

OWNER’S MANUAL

BBQ150

RESIDENTIAL PELLET GRILL

This Grill Protected Under Patent Numbers:

4,619,209 and 4,823,684

FOR OUTDOOR USE ONLY!

WARNING!

DO NOT STORE OR USE COMBUSTIBLE MATERIALS

NEAR THIS APPLIANCE!

USE ONLY TRAEGER BRAND HARDWOOD

BBQ PELLETS IN THE OPERATION OF THIS UNIT.

INTRODUCTION

Congratulations on the purchase of your Traeger Wood Pellet Grill, Model BBQ150.
With proper set-up, operation, and maintenance, this grill will provide you with delicious
food and years of cooking enjoyment.

The BBQ150 can also be used as a built-in Grill. Instructions for that application are
included.

NOTE: NUMBERS FOLLOWING PART NAMES THROUGHOUT THIS MANUAL
REFER TO THE COMPONENT DIAGRAMS.

When you un-box the Grill, remove all parts from the box and inside the Grill. Remove
any remaining packaging material as well. Make sure you have, and can identify all of the
the following parts:

(2) Leg Frames (257)
(2) Leg Braces (261)
(2) Flue Trim (232)
(2) Chimney Cap Assemblies (235)
(2) Grease Buckets (243)
(2) Locking Casters (244)
(2) Casters (245)
(2) Porcelain Grills (256)
(2) Grease Drain Pans (253)
(2) Heat Baffles (251)
(1) Hardware Kit (246) with 4 Bolts, 8 Screws and 12 Washers

You will need to complete the assembly process which includes:

1) Mounting the Leg Frames (257) to the Grill.

2) Attaching the Leg Braces (261).

3) Installing the Casters (244, 245).

4) Mounting the Chimney Cap Assemblies (235).

5) Positioning the Heat Baffles (251) over the Firepots (102).

6) Setting the Grease Drain Pans (253) over the Heat Baffles (251).

7) Placing the Porcelain Grills (256) on the Grill Supports.

8) Hanging the Grease Buckets (243) on the Bucket Hooks.

TOOLS SUPPLIED FOR ASSEMBLY:

(1) 7/16” wrench
(1) Phillips screwdriver

Follow these step by step instructions and you will be cookin’ in no time!