TL-WR843ND
Hardware Connection
1
Quick Installation Guide
300Mbps Wireless AP/Client Router
MODEL NO. TL-WR843ND
Conguration for Windows with Setup Wizard
2
7106503962
Package Contents
Resource CD
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
2
Select
TL-WR843ND
and click
Easy Setup Assistant
.
3
Click START to start the conguration.
4
Connect the Router to your computer and power on
the Router. Click NEXT.
5
Turn the work mode switch to WISP. Click
NEXT to continue.
7
86
Ethernet Cable
TL-WR843ND
Power Adapter
If you are using a MAC/Linux or a windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.
(To be continued)
3 4
Passive PoE Injector
QIG
300Mbps Wireless AP/Client Router
MODEL NO. TL-WR843ND
1
Please conrm the work mode switch is in WISP mode.
Connect your computer to the LAN port of your Router with an Ethernet Cable.
2
3
1. You are recommended to place the Router away from electrical devices, such as ceiling fans, home security systems,
microwave and the base for a cordless phone.
2. If the distance between the outlet and the Router is too long to supply power, you can set up the hardware connection with the
provided Passive PoE Injector.
WISP Signal
Plug one end of the provided power adapter into the POWER jack of the Router, and the other end to a standard electrical
wall socket. Then press the ON/OFF button of the Router.
Here we take the Client Router (WISP) mode for example. If you want to achieve other applications, please refer to the User Guide on the
resource CD.
ROUTER
WISP
WPS/
RESET
INTERNET
Enter the password of your wireless network. Sometimes
it may be provided by your WISP. Cllick NEXT.
Select the connection type your ISP provides and click NEXT.
Here we take Dynamic IP for example.
After conrming the hardware connection and the status
of LEDs, please select the target wireless network you want
to join. You can also set it mannually. Click
NEXT
.
TL-WR843ND
Loading...