TP-Link TL-PA4010P, TL-PA451, TL-PA4010P KIT EU Quick Installation Manual

Powerline

Quick Installation Guide

Adapter

Adapter

Applicable to TL-PA4010P, TL-PA451, and their multiple-pack kits

AV500 Powerline Adapter with AC Pass Through

7106505226 REV2.0.0

Plug and Play

Router

WAN LAN

1

2

3

4

Enjoy!

Wait until the powerline
LED turns on.

Attention

Power Strip

Wall Outlet

More: To add additional Powerline devices

with the default settings, simply plug them
into the wall sockets on the same electrical
circuit.

* This QIG uses TL-PA4010P KIT(EU) as an example.

LED and Item Legend

To create a secure powerline network:

To join an existing secure powerline network:

Existing Powerline Network

3 Done.

Blinking

Ethernet

Powerline

Power

DESCRIPTIONLED STATUS

On/Off

The powerline adapter is on or off.
Once every second: Pairing is in process.
Once every 15 seconds: Power-Saving Mode is on.*
The adapter is connected to a powerline network.

The adapter is transferring data.

The powerline adapter is not connected to any powerline network or
is in Power-Saving Mode.

The Ethernet port is connected or not connected.

The Ethernet port is transferring data.

DESCRIPTIONITEM

Press and hold for 1 second to set up or join a secure powerline network.
Press and hold for 8 seconds to leave an existing powerline network.

Pair Button

Blinking

Blinking

On

Off

On/Off

Blinking

Use as an electrical outlet expansion for power strip or household appliance. It can
remove some electrical noise that might affect powerline performance.

Blinking

On

Blinking

Blinking

On

Integrated

Electrical Socket

Set Up a Secure Powerline Network by Pairing (Recommended)

You can create or join a secure powerline network using the Pair button on two devices at a time.
Tips: We recommend that you plug in the powerline devices near each other when pairing.

* Five minutes after the device connected to the powerline adapter is turned off or inactive, the

powerline adapter will automatically switch to Power-Saving Mode.

FAQ (Frequently Asked Questions)

Q1. How to troubleshoot if there is no Internet connection in my powerline network?

A1. Make sure all powerline devices are on the same electrical circuit.
A2. Make sure the Powerline LEDs light up on all of your powerline devices. If they do not, reset or pair all your powerline devices.
A3. Make sure all hardware connections are correctly and securely connected.
A4. Check if you have an Internet connection by connecting the computer directly to the modem or router.
A5. Make sure your computer’s IP address is in the same segment as your router’s.

Q3. What can I do if a successfully-paired powerline device does not reconnect after it has been

moved to a new location?

A1. Try another socket and make sure it is on the same electrical circuit.
A2. Try to pair it again, and make sure the Powerline LED is on.
A3. Check for possible interference, such as a washer, air conditioner or other household appliance that may be too close to one of the

powerline adapters or extenders. Plug it into the intergrated electrical socket to remove some electrical noise.

More advanced configurations, such as reset, firmware upgrade and QoS configuration, can be accessed through the Powerline Utility. You can
install the Powerline Utility from the resource CD (for Windows only) or download it from the TP-LINK official website (for Windows and Mac OS X).

For more information, please visit our website:
http://www.tp-link.com

©2015 TP-LINK

A B

A B C

1 Press the Pair button

for 1 second.

1 Press the Pair button for 1 second on any powerline

device in the existing powerline network.

2 Within 2 minutes, press

the Pair button for 1
second.

2 Within 2 minutes,

press the Pair button
for 1 second.

3 Done.